Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
21 Cards in this Set
- Front
- Back
|
1. What does a Main Tank Pump PRESS light and associated EICAS message indicate?
A. Respective engine not above 50% N2 or N3 (RR), output pressure low, or Main Tank Pump switch OFF B. Fuel output pressure low with the pump selected ON, or Main Tank Pump switch OFF C. APU running |
B. Fuel output pressure low with the pump selected ON, or Main Tank Pump switch OFF
|
|
|
2. What does a Center Pump PRESS light and associated EICAS message indicate?
A. Center pneumatic pressure low B. No center tank fuel remaining, output pressure high or respective N2 above 50% with Center Pump switch ON C. No center tank fuel remaining, output pressure low with the pump selected ON or respective N2 or N3 (RR) below 50% with Center Pump switch ON |
C. No center tank fuel remaining, output pressure low with the pump selected ON or
respective N2 or N3 (RR) below 50% with Center Pump switch ON |
|
|
3. What does an FMC INSUFFICIENT FUEL message indicate?
A. Predicted fuel at destination will be 0 lbs B. Predicted fuel at destination will be 4000 lbs C. Predicted fuel at destination is less than the FMC reserves |
C. Predicted fuel at destination is less than the FMC reserves
|
|
|
4. Which fuel tank provides the Fuel Temperature Indicator information?
A. Left B. Center C. Right |
C. Right
|
|
|
5. What does a Crossfeed VALVE light and associated EICAS message indicate?
A. Crossfeed valve operating normally B. Crossfeed valve not in selected position C. Fuel jettison system activated |
B. Crossfeed valve not in selected position
|
|
|
6. What condition causes the L FWD Pump PRESS light to extinguish with the switch OFF?
A. APU running on the ground B. Left engine running C. Weather radar TEST mode selected |
A. APU running on the ground
|
|
|
7. Which pump is signaled to operate with no main AC power available for an APU start?
A. Center #2 electric AC fuel pump B. DC pump located in the left main fuel tank C. L AFT pump regardless of switch position with no AC power available |
B. DC pump located in the left main fuel tank
|
|
|
8. Is it possible for the dedicated APU DC pump to pressurize the left main fuel manifold?
A. No, the DC pump has a check valve that prevents pressurizing the left fuel manifold B. Yes, the DC pump has an override system in the event the main AC pumps fail C. Yes, the DC pump has a check valve that allows pressurization of the left fuel manifold |
A. No, the DC pump has a check valve that prevents pressurizing the left fuel manifold
|
|
|
9. What does the LOW FUEL EICAS message and FUEL CONFIG light indicate?
A. Crossfeed valve position disagrees with commanded position B. Fuel quantity is low in either left or right main tank C. Less than 2200 lbs in the center tan |
B. Fuel quantity is low in either left or right main tank
|
|
|
10. The center fuel pumps have approximately _________ the output pressure of the main tank
fuel pumps. A. three times B. twice C. four times |
B. twice
|
|
|
11. Fuel balancing is accomplished by __________________.
A. closing the crossfeed valve(s) and turning on the fuel pump switches for the center fuel tank. B. turning off the left or right main fuel tank that has the highest quantity C. opening the crossfeed valve(s) and turning off the fuel pump switches for the left or right main fuel tank that has the lowest quantity |
C. opening the crossfeed valve(s) and turning off the fuel pump switches for the left or right
main fuel tank that has the lowest quantity |
|
|
12. Center tank fuel will feed first if all fuel pumps are on, because:
A. Main tank fuel feed valves close when the Center Pump switches are ON B. The center tank fuel pump output pressure is greater than the main tank fuel pump output pressure C. Automatic tank sequencing by the fuel quantity monitoring system is designed to keep the aircraft CG within limits |
B. The center tank fuel pump output pressure is greater than the main tank fuel pump output
pressure |
|
|
13. What does the L and/or R FUEL SYS PRESS EICAS message indicate?
A. All fuel pumps have low output pressure or all fuel pumps on one side have low output pressure and the Crossfeed switch(es) are OFF B. One or both Main Tank Pumps should be turned ON C. The center tank fuel pump is supplying fuel pressure |
A. All fuel pumps have low output pressure or all fuel pumps on one side have low output
pressure and the Crossfeed switch(es) are OFF |
|
|
14. What does the INSUFFICIENT FUEL CDU message indicate?
A. Predicted fuel at alternate is greater than the FMC reserves B. Predicted fuel at destination is less than FMC reserves C. Fuel quantity is low in the center fuel tank |
B. Predicted fuel at destination is less than FMC reserves
|
|
|
757 15. What are the usable fuel amounts?
A. 14,600 lbs for each main tank and 46,200 lbs for the center tank B. 15,600 lbs for each main tank and 45,200 lbs for the center tank C. 14,000 lbs for each main tank and 36,200 lbs for the center tank |
A. 14,600 lbs for each main tank and 46,200 lbs for the center tank
|
|
|
16. What causes the FUEL CONFIG light and associated EICAS message to indicate?
A. Less than 1800 lbs in either main tank, or more than 2200 lbs in the center tank with Right Tank Pump switch OFF or fuel differs by 200 lbs between main tanks B. Less than 5000 lbs in either main tank, or more than 1200 lbs in the center tank with Center Pump switches OFF or fuel differs by 2200 lbs between main tanks C. Less than 2200 lbs in either main tank, or more than 1200 lbs in the center tank with Center Pump switches OFF or fuel differs by 1800 lbs between main tanks |
C. Less than 2200 lbs in either main tank, or more than 1200 lbs in the center tank with
Center Pump switches OFF or fuel differs by 1800 lbs between main tanks |
|
|
767 17. What are the usable fuel amounts?
A. 49,650 lbs for each main tank and 72,855 lbs for the center tank B. 40,267 lbs for each main tank and 80,132 lbs for the center tank C. 14,650 lbs for each main tank and 36,400 lbs for the center tank |
B. 40,267 lbs for each main tank and 80,132 lbs for the center tank
|
|
|
767 18. How much of an imbalance annunciates the FUEL CONFIG light and associated EICAS
message? A. 2500 lbs (48,000 lbs or less), linear reduction to 1500 lbs (48,000 lbs to 79,800 lbs), 1500 lbs (greater than 79,800 lbs) B. 2200 lbs (48,000 lbs or less), linear reduction to 1200 lbs (48,000 lbs to 79,800 lbs), 1500 lbs (greater than 79,800 lbs) C. 2500 lbs (51,000 lbs or less), linear reduction to 1500 lbs (36,400 lbs to 79,800 lbs), 1500 lbs (greater than 22,000 lbs) |
A. 2500 lbs (48,000 lbs or less), linear reduction to 1500 lbs (48,000 lbs to 79,800 lbs),
1500 lbs (greater than 79,800 lbs) |
|
|
767 19. What does a FUEL JET NOZ EICAS message and associated VALVE light indicate on the
Fuel Jettison Panel? A. Associated fuel jettison pump is inoperative B. Associated fuel jettison transfer valve is not in commanded position C. Inflight, the nozzle valve position disagrees with the commanded position |
C. Inflight, the nozzle valve position disagrees with the commanded position
|
|
|
767 20. Fuel is jettisoned at a rate of approximately ___________ per minute.
A. 2600 lbs B. 2200 lbs C. 1200 lbs |
A. 2600 lbs
|
|
|
767 21. What does an L or R FUEL JET PUMP EICAS message indicate?
A. Associated fuel jettison pump is inoperative B. Fuel jettison is not available C. Main tank pump inoperative |
A. Associated fuel jettison pump is inoperative
|
