Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
7 Cards in this Set
- Front
- Back
|
WHAT COMPONENT OF THE DRUM ASSEMBLY LOOKS LIKE THE THREADS OF A SCREW ?
|
THE INNER DRUM HELIX OF THE DRUM ASSEMBLY LOOKS LIKE THE THREADS OF A SCREW AND PRODUCES A SCREWING-TYPE MOTION,CAUSING ROUNDS TO SLIDE ALONG PARTITIONS FROM ONE END TO THE OTHER END OF THE OUTER DRUM
|
|
|
WHAT IS THE PURPOSE OF THE RETAINER GEAR AND STEEL BALL BEARINGS CONTAINED IN THE ENTRANCE COVER ?
|
THE PURPOSE OF THE RETAINER GEAR AND STEEL BALL BEARINGS CONTAINED IN THE ENTRANCE COVER IS TO SUPPORT THE SCOOP DISKS AND THE INNER DRUM HELIX
|
|
|
WHAT COMPONENT SHOULD YOU USE TO INDEX THE DRUM FOR INSTALLATION OF THE EXIT UNIT?
|
A SPRING-LOADED TIMING PIN ON THE ENTRANCE COVER IS USED TO INDEX THE DRUM FOR INSTALLATION OF THE EXIT UNIT
|
|
|
WHAT IS THE PURPOSE OF THE TWO SETS OF SPROCKET SPUR GEARS LOCATED ON THE SCOOP DISK?
|
THE TWO SETS OF SROCKET SPUR GEARS LOCATED ON THE SCOOP DISK MESH WITH THE RETAINER GEAR IN THE ENTRANCE AND EXIT COVERS THAT PROVIDE ROTATING SUPPORT FOR THE INNER DRUM HELIX.
|
|
|
WHAT SWITCH IN THE EXIT UNIT PREVENTS EXPENDED ROUNDS FROM BEING FED INTO THE GUN AND JAMMING IT?
|
THE LAST ROUND SWITCH IN THE EXIT PREVENTS EXPENDED ROUNDS FROM BEING FED INTO THE GUN AND JAMMING IT.
|
|
|
WHAT IS THE PURPOSE OF THE SPROCKET ASSEMBLIES IN THE ENTRANCE UNIT?
|
THE SPROCKET ASSEMBLIES IN THE ENTRANCE UNIT REOVE LIVE ROUNDS OR EXPENDED CASES FROM THE CONVEYOR ELEMENTS AND PLACE THEM IN THE ENTRANCE COVER RETAINER PARTITIONS.
|
|
|
WHAT PART OF THE TRANSFER UNIT AND ADAPTER ASSEMBLY INTERFACES WITH THE LINKLESS AMMUNITION LOADING SYSTEM(LALS)
|
THE ADAPTER ASSEMBLY OF THE TRANSFER UNIT AND ADAPTER ASSEMBLY INTERFACES WITH THE LINKLESS AMMUNITION LOADING SYSTEM(LALS)
|
