Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
30 Cards in this Set
- Front
- Back
|
WHAT TYPE OF BOMB IS USED IN MOST BOMBING OPERATIONS
|
NORMALLY, LOW-DRAG GENERAL-PURPOSE(LDGP) BOMBS ARE USED IN BOMBING OPERATIONS. CURRENTLY, MK 80 (SERIES) LDGP BOMBS ARE USED.
|
|
|
NAME THE TYPE OF PALLETS ON WHICH BOMBS ARE SHIPPED.
|
BOMBS ARE SHIPPED ON METAL PALLETS BECAUSE OF THEIR INCREASE CAPACITY AND FOR GROUNDING PURPOSES OVER WOODEN PALLETS.
|
|
|
THE MK 15 FIN IS USED WITH THE ? LDGP BOMB
|
THE MK 15 FIN IS USED WITH THE MK 82 BOMB IN EITHER A LOW-DRAG OR HIGH-DRAG CONFIGURATION
|
|
|
WHAT ADAPTER IS USED TO MATE THE MAU-91A/B FIN TO THE MK 83 BOMB?
|
THE ADU-320/B IS USED TO MATE THE MAU-91A/B FIN TO THE MK83 BOMB.
|
|
|
LIST THE THREE MODES OF DELIVERY USED WITH SNAKE-EYE FINS.
|
THE THREE MODES OF DELIVERY USED WITH SNAKE-EYE FINS ARE THE (RETARDED MODE):USED DURING LOW-LEVEL BOMBING; (NON-RETARDED-MODE);IN WHICH THE THE WEAPON FREE-FALLS TO THE TARGET; AND THE (IN-FLIGHT SELECTED MODE (PILOT OPTION), WHERE THE PILOT SELECTED EITHER THE RETARDED OR NONRETARDED MODE OF DELIVERY.
|
|
|
HOW DO LASER-GUIDED BOMBS DETECT A TARGET
|
LASER-GUIDED BOMBS DETECT A TARGET ILLUMINATED BY A LASER BEAM.
|
|
|
WHAT TYPE OF TAIL FUZE IS USED WITH LASER-GUIDED BOMBS
|
ELECTRICAL TAIL FUZES ARE USED IN LASER-GUIDED BOMBS
|
|
|
DESCRIBE THE LOCATION OF THE WING ASSEMBLY USED WITH LASER-GUIDED BOMBS.
|
THE WING ASSEMBLY IS MOUNTED ON THE AFT END OF THE BOMB BODY TO ADD AERODYNAMIC STABILITY AND LIFT FOR IN-FLIGHT MANEUVERING.
|
|
|
ON THE MK 82 BOMB WHAT CCG AND WING IS USED TO MAKE GUIDED BOMB UNITS
|
ON THE MK 82 BOMB CCG MAU-169 AND MXU-650 FOR THE WING
|
|
|
ON THE MK 83 WHAT CCG AND WING IS USED TO MAKE GUIDED BOMB UNIT
|
ON THE MK 83 THE CCG MAU-169 AND MXU-667 FOR THE WING
|
|
|
ON THE MK 84 WHAT CCG AND WING MODEL IS USED TO MAKE GUIDED BOMB UNIT
|
THE MK 84 USES THE CCG-169 AND THE MXU-651 TO MAKE GUIDED BOMB UNIT
|
|
|
THE GBU-24B/B GROUND BOMB UNIT (GBU)HAS A THERMAL PROTECTIVE COATING APPLIED TO THE SURFACE TO EXTEND COOK OFF TIME. THE GBU-24B/B MUST NOT BE MISSING MORE THAN ? SQUARE INCHES OF THERMAL COATING IN A SINGLE AREA OR MORE THAN ? SQUARE INCHES TOTAL.
|
THE GBU-24B/B HAS A THERMAL PROTECTIVE COATING APPLIED TO THE SURFACE TO EXTEND THE COOK-OFF TIME. THE GBU-24B/B MUST NOT BE MISSING MORE THAN 20 SQUARE INCHES OF THERMAL COATING IN A SINGLE AREA OR MORE THAN 40 SQUARE INCHES TOTAL.
|
|
|
WHAT DOES (JADM) STAND FOR AND WHAT IS IT PURPOSE
|
JOINT DIRECT ATTACK MUNITION
IT IS A GBU-31 SERIES USED IN MK 80/BLU SERIES BOMBS WITH A JDAM KIT INSTALLED |
|
|
WHAT IS
RETARDED MODE: NON-RETARDED MODE: IN-FLIGHT SELECTED MODE: |
RETARDED MODE: LOW LEVEL
NON-RETARDED MODE: FREEFALL IN-FLIGHT SELECTED MODE: PILOT OPTION (RETARDED OR NON-RETARDED MODE |
|
|
NAME THE MAIN STRUCTURE OF THE MK 7 BOMB DISPENSER
|
THE CARGO SECTION IS MAIN STRUCTURE OF THE MK 7 BOMB DISPENSER
|
|
|
THE MK 20 BOMB CLUSTER WEIGHS ? AND CONTAINS ? BOMBLETS ?
|
THE MK 20 BOMB CLUSTER WEIGHS 490 POUNDS AND HOLDS 247 MK118 ANTITANK BOMBLETS.
|
|
|
NAME THE COMPONENT USED TO STABILIZE THE BOMB AFTER RELEASE FROM THE AIRCRAFT
|
THE TAIL-CONE ASSEMBLY,ATTACHED TO THE AFT END OF THE CARGO SECTION,STABILIZES THE BOMB AFTER IT IS RELEASED FROM THE AIRCRAFT.
|
|
|
DESCRIBE THE PURPOSE OF THE MK 339 MOD 1 MECHANICAL TIME FUZE
|
THE MK 339 MOD 1 MECHANICAL TIME FUZE IS USED TO INITIATE THE LINEAR-SHAPED CHARGES IN THE CARGO SECTION WALL.
|
|
|
LIST THE COMPONTS OF THE MK118 MOD 0 AND MOD 1 ANTITANK BOMBLETS
|
THE MOD 118 MOD 0 AND MOD 1 ANTITANK BOMBS CONTAIN THE FOLLOWING:
MK 1 MOD 0 FUZING SYSTEM SHAPED-CHARGED WARHEAD FIXED STABILIZING FINS |
|
|
WHAT SHIPPING CONTAINER IS USED TO SHIP AND STORE THE MK 20 BOMB CLUSTER?
|
THE MK 427 MOD 0 MOD 1 SHIPPING CONTAINERS ARE USED TO SHIP AND STORE MK 20 BOMB CLUSTERS
|
|
|
DESCRIBE THE PRIMARY PURPOSE OF PRACTICE BOMBS
|
PRACTICE BOMBS ARE PRIMARY USED FOR SAFETY WHEN TRAINING NEW OR INEXPERIENCED PILOTS AND GROUND-HANDLING CREWS
|
|
|
LIST THE TWO GENERAL TYPES OF PRACTICE BOMBS
|
THE TWO GENERAL TYPES OF PRACTICE BOMBS ARE THE SUBCALIBER AND THE FULL-SCALE BOMBS
|
|
|
LIST THE TYPES OF SUBCALIBER PRACTICE BOMBS
|
THE MK 76 MOD 5 SUBCALIBER PRACTICE BOMB IS USED FOR IMPACT FIRING ONLY
THE BDU-48/B SUBCALIBER PRACTICE BOMB IS USED TO SIMULATE RETARDED WEAPONS DELIVERY |
|
|
WHAT COLOR ARE MK 80 SERIES INERT LDGP BOMBS PAINTED
|
MK 80 SERIES INERT LDGP BOMBS ARE PAINTED (BLUE)
|
|
|
WHAT IS THE MAXIMUM LENGTH OF TIME THAT THE MK 376 ELECTRICAL TAIL FUZES CAN BE USED AFTER THEY ARE REMOVED FROM THEIR CONTAINER
|
DON'T USE A FUZE THAT HAS BEEN REMOVED FROM ITS HERMETICALLY SEALED CONTAINER FOR OVER 30 DAYS
|
|
|
IN WHAT LOCATION SHOULD YOU NEVER PACK OR UNPACK FUZES?
|
NEVER UNPACK FUZES FROM THEIR CONTAINERS IN THE MAGAZINE
|
|
|
WHY IS EXPLOSIVE BOMB AMMUNITION HAZARDOUS
|
EXPLOSIVE BOMB AMMUNITION IS HAZARDOUS BECAUSE OF ITS TENDENCY TO SET OFF ALL EXPLOSIVE MATERIAL NEAR IT IF IT IS DETONATED
|
|
|
HANDLING ? CAUSES MORE INJURIES THAN HANDLING ?
|
HANDLING PRACTICE BOMBS CAUSES MORE INJURIES THAN HANDLING BOMB AMMUNTION CONTAINING HIGH EXPLOSIVES
|
|
|
HOW ARE FUZES PACKED AWAY?
|
FUZES ARE PACKED AWAY IN SEALED,MOISTURE PROOF CONTAINERS, AND SHOULD NOT BE UNSEALED UNTIL THEY ARE REQUIRED FOR USE
|
|
|
IF FUZES ARE UNPACKED WHAT CONDITION ARE THYE REPACKED IN
|
FUZES UNPACKED AND NOT USED SHOULD BE RETURNED TO THEIR ORIGINAL CONDITION,REPACKED,AND DATED
|
