Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
63 Cards in this Set
- Front
- Back
Give a basic description of the M61A1 aircraft?
|
Six (6) barrel rotary action automatic |
|
The M61A1 gun rotary mechanism works off of what aircraft system? |
Hydraulic
|
|
The M61A1 aircraft gun is ____ driven and ____ controlled? |
Hydraulically - Electrically |
|
In an M61A1 gun system the six barrel rotary action mechanism is operated by what means? |
Hydraulic power |
|
The M61A1 gun has a pilot selectable firing rate of ____ low and ____ high? |
4,000 - 6,000 |
|
Naval aircraft configured with the M61A1, 20MM aircraft gun have what (a) low and (b) high selectable rates of fire? |
(a) 4,000 (b) 6,000 |
|
What is the SWL of the F/A-18 gun system hoisting adapter? |
874 LBS (Commonly known as the bird cage in the Hornet community) |
|
What series of ammunition is used in the M61A1 aircraft gun?
|
M50 and PGU |
|
How is M50 series 20MM ammunition identified? |
Color and lettering |
|
What round of M50 series ammunition contains a fuze in the projectile? |
M505A3 |
|
What 20MM gun ammunition shall not be used in-flight? |
M54 High Pressure Test (HPT) |
|
What ammunition should NEVER be fired from an aircraft in flight? |
HPT |
|
What are the primary parts of the M61A1 gun? |
Barrels, housing assembly, and rotor assembly |
|
What restrains individual barrel movement during firing? |
Muzzle clamp assembly |
|
The six barrels of the M61A1 gun are supported by what component? |
Stub rotor |
|
What secures the barrels to the rotor assembly? |
Three rows of interrupted locking lugs |
|
What component guides the rounds through the actions of the gun? |
Breech bolt assembly |
|
The M61A1 gun uses what total number of breech bolt assemblies? |
Six
|
|
How many breech bolt assemblies are in the M61A1 Vulcan gun? |
Six |
|
What component transmits the firing voltage to the primer of the round? |
Breech bolt assembly |
|
The barrels of an M61A1 gun are secured to the rotor assembly by what means? |
Interrupted locking lugs |
|
What gives you a gripping surface for easy installation and removal of the barrels from the rotor? |
Knurled bands on the barrels |
|
What provides for the front mounting of the M61A1 aircraft gun? |
Recoil Adapters |
|
On the M61A1 gun, what is the clearing sector solenoid used for? |
Controls movement of clearing sector assembly |
|
What happens when the clearing sector assembly solenoid is activated? |
Sector arm diverts the bolt assemblies into the clearing cam path |
|
What controls the forward and aft movement of the breech bolts in the M61A1 gun? |
Rotor tracks |
|
What engages the rim of a round throughout the firing cycle? |
Extractor lip |
|
Where are the extractor lips located on the gun? |
Front of each breech bolt assembly |
|
What component is used to check the gun barrels after firing? |
Bore erosion gage |
|
On the M61A1 gun, the lubricator assembly is externally attached to what other assembly? |
Gun housing |
|
A lubricator assembly is attached to what component on the M61A1 gun? |
Housing assembly |
|
What lubricant is used in the lubricator assembly on the M61A1 gun? |
DOD-L-85336 (Due to California EPA restrictions, Lemoore squadrons use MC3000, that answer will most likely not be on the test) |
|
In the M61A1 gun when does the firing cycle begin? |
When power is applied to firing contact assembly |
|
The clearing cycle of the M61A1 gun starts at what time?
|
When the breech bolt assembly returns the empty case to the guide bar |
|
Ammunition is guided into the extractor lip on a breech-bolt assembly by what? |
Guide bar fingers |
|
Empty ammunition cases are removed from the bolt assembly chamber by what? |
Extractor lip |
|
What would happen if the clearing sector arm was not installed?
|
Gun would not fire? |
|
What diverts the succeeding bolt assemblies into the clearing cam path? |
Clearing sector arm |
|
What forces the bolt locking block upward when the clearing solenoid is deactivated? |
Leaf springs |
|
What is the purpose of the last round switch? |
Prevents expended rounds from being fed into the gun |
|
What removes live rounds or expended cases from the retainer partitions in the exit cover and places them in the conveyor elements? |
Sprocket assembly |
|
What provides a path from the entrance unit to the exit unit through which conveyor elements pass? |
Bypass chute |
|
Ammunition is transported from the transfer unit to the entrance unit by what chute assembly? |
Return |
|
What provides a path through which the conveyor elements transport rounds and expended cases around the aircraft structure?
|
Chute assemblies - return and feed |
|
Conveyer elements are joined together by what? |
Removable hinge pins |
|
The ammunition handling system in the F/A-18 can hold a maximum of how many rounds/ |
578 rounds |
|
How is the gun mounted in the F/A-18 aircraft? |
Internally mounted in the nose of the aircraft's Centerline |
|
When installed in the F/A-18, the M61A1 gun system is handled as? |
A single palletized unit |
|
What position should the manual clearing handle remain in until you are actually performing gun arming procedures?
|
Cleared position |
|
What condition, if any is required when ammunition is loaded into the LALS?
|
A RADHAZ free environment |
|
The LALS is not loaded or downloaded on the flight deck of an aircraft for what reason? |
The flight deck is not a RADHAZ safe area |
|
The MHU-131/E32K Ammunition Transporter Loader Linkless Ammunition Loading System (LALS I) can hold a maximum of how many rounds of 20MM ammunition? |
1,400 |
|
The GFK-21/E32K-7Ammunition Loader (LALS II) can hold a maximum of how many 20MM rounds? |
1,800 |
|
What level of maintenance performs maintenance on the LALS? |
Intermediate level |
|
At the organization level, what is the most important maintenance practice followed when working on the LALS?
|
Ensure you are in a RADHAZ free environment |
|
What series of ammunition is used in the LALS?
|
M50 and PGU series |
|
How is the LALS mated to the aircraft? |
The timed interface unit assembly must be mated to the timed aircraft gun system by the aircraft adapter assembly or Aircraft Interface Unit (AIU)
|
|
After an M61A1 gun has fired 120,000 rounds, it should be sent to what location? |
Overhaul depot |
|
At what round interval doe scheduled maintenance begin for the M61A1 gun? |
7,500 rounds per the NA 11-M61A1-1 |
|
At what round interval are the breech-bolt assemblies changed in the M61A1 gun?
|
15,000 |
|
Scheduled maintenance on the M61A1 gun for the handling and drive system is set at an interval of how many rounds? |
30,000 |
|
The M61A1 gun is sent to depot level for overhaul at what round interval? |
120,000 |
|
What is the scheduled maintenance interval established by the number of rounds fired through the M61A1 gun? |
7,500, 15,000, 30,000, 45,000, 60,000, 75,000, 90,000, 105,000, and 120,000 thousand rounds |