Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
What does the TCP (Tool Control Program) ensure?
|
Tool accountability before and after a maintenance task
|
|
Who is responsible for ensuring tools are procured and issued on a controlled basis?
|
Material Control Officer
|
|
What is the first step that is required if a tool is found missing during a tool box inventory?
|
Conduct an immediate search
|
|
What two types of hammers an ad should be familiar with?
|
Mallet and Ball Peen
|
|
How many different types of handles are used with sockets?
|
Four
|
|
What is the degree offset of a combination wrench?
|
15° of clearance
|
|
For whar purpose is an Offset built into a Combination Wrench?
|
Increase clearance
|
|
What other name is used for the Adjustable Wrench?
|
Knuckle Busters
|
|
Which is a characteristic that describes the Offset Screwdriver?
|
Screwdriver with both blades bend 90° degrees
|
|
What purpose are diagonal cutters for?
|
To cut small wire and cotter pins
|
|
What are safety wires used for?
|
Hold, twist and cut
|
|
What is considered a Special Tool?
|
Torque wrench
|
|
What are the most common types of torque wrenches?
|
Deflecting Beam, Dial Indicator, and Micrometer Setting
|
|
How many types of micrometers are commonly used throughout the navy?
|
Three. Inside Micrometer, Outside Micrometer And Depth Micrometer.
|
|
WHAT ARE THE THREE PRINCIPLE PARTS OF A BOLT?
|
Head, grip and threads.
|
|
What head styles do "AN" bolts come in?
|
Hex, Clevis And Eyebolt.
|
|
What do self-locking nuts provide?
|
Tight connections that do not loosen under vibrations
|
|
What describes safety wiring?
|
Method of wiring together two or more units.
|
|
What purpose are cotter pins used for?
|
To secure bolts, screws, nuts and pins.
|
|
How many pigtail twist, if any, are needed at the end of a wiring job?
|
A pigtail of 1/4 to 1/2 in. (3 to 6 twist)
|