Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
The COORDS display always shows 4 decimal places of accuracy.
|
FALSE
|
|
True or False:
The actual precision of the AutoCAD drawing database is 14 significant digits, regardless of the "Units Precision" setting. |
TRUE
|
|
The orientation of angle 0 in AutoCAD is always east (positive X direction).
|
FALSE
|
|
True or False:
You can enter fractions or decimals at the keyboard, regardless of the Units setting. |
TRUE
|
|
True or False:
AutoCAD drawings ALWAYS have a maximum size of 12 units by 9 units. |
FALSE
|
|
True or False:
When CAD is used to create a drawing, the geometry should be drawn full size in real-world units. |
TRUE
|
|
True or False:
SNAP can be set to any value. |
TRUE
|
|
True or False:
You can have multiple "Model" tabs, but only one "Layout" tab. |
FALSE
|
|
True or False:
GRID is included in a print or plot of a drawing. |
FALSE
|
|
True or False:
You should use both Grid Snap and Polar Snap simultaneously. |
FALSE
|
|
If you are setting up a drawing for metric units or decimal units, set the Units format to ____.
a. Decimal b. Engineering c. Scientific d. Metric |
a. Decimal
|
|
If you are setting up a drawing to display explicit feet and inches, you can set the Units format to ____.
a. Architectural or Scientific b. Scientific or Engineering c. Architectural or Engineering d. Fractional or Architectural |
c. Architectural or Engineering
|
|
To enter explicit feet and inches at the keyboard, first make the desired Units setting, then use the ____ letter/symbol for feet and the ____ letter/symbol for inches.
a. f, i b. " (quote), ' (apostrophe) c. ' (apostrophe), “(quote) d. “(quote), nothing (no symbol needed) |
c. ' (apostrophe), “(quote)
|
|
After changing the Limits setting, you should immediately ____.
a. Save b. Zoom All c. turn off Grid d. set Units |
b. Zoom All
|
|
If you are planning to plot the drawing to a scale, the Limits should be set to a proportion of the ____.
a. drawing geometry b. sheet size used for plotting c. screen size d. Units setting |
b. sheet size used for plotting
|
|
The ON or OFF and the F9 key toggles ____.
a. GRID b. ORTHO c. SNAP d. HELP |
c. SNAP
|
|
If you select Start from Scratch, Imperial (feet and inches) when you start a new drawing, the ____ settings are the same as in the ACAD.DWT template drawing.
a. Units and Limits b. Snap and Grid c. Units and Snap d. all of the above |
d. all of the above
|
|
____ forces the cursor movement to regular distance increments relative to an established point (such as the “first point” of a Line), whereas ____ forces the cursor movement to regular angular increments.
a. Grid Snap, Polar Snap b. Polar Snap, Polar Tracking c. Polar Tracking, Polar Snap d. Grid Snap, Grid Tracking |
b. Polar Snap, Polar Tracking
|
|
As a general rule, you should first create the drawing geometry in ____, then switch to ____ and ____.
a. a Layout tab, the Model tab, create a viewport to look into paper space. b. the Model tab, a Layout tab, create a viewport to look into paper space. c. a Layout tab, the Model tab, create a viewport to look into model space. d. the Model tab, a Layout tab, create a viewport to look into model space. |
d. the Model tab, a Layout tab, create a viewport to look into model space.
|
|
____ and ____ can be set independently of each other.
a. Grid Snap, GRID b. Grid Snap, Polar Snap c. Polar Snap, GRID d. all of the above |
d. all of the above
|