• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/26

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

26 Cards in this Set

  • Front
  • Back
Glulam members of the stress class 24F have an allowable bending stress of...?
2400 psi
Wood I-joists are generally spaced...?
like lumber joists, often 12", 16", or 24" o.c.
When the top fibers of a rectangular beam are in tension and the bottom fibers are in compression, the bending moment is...?
negative
The bending moment in a beam is maximum when the shear is...?
equal to zero
The deformation or change in size caused by exterior forces applied on a member.
Strain
When the top fibers of a rectangular beam are in tension and the bottom in compression, the bending moment is...?
Negative
Wind is measured at a standard height of __ft. above the ground surface.
33 ft.
The internal resistance to deformation or to the action of the external force.
Stress
Wind pressure on a building is affected by what four factors?
wind speed
surrounding terrain
building height
building shape
What is the most widely used structural steel in building construction?
A36
A slab that is ribbed in both directions.
Waffle Slab
The location where seismic movement begins.
Hypocenter
A slab that is ribbed in one direction only.
Pan Joist
Moment-resisting, or rigid frames resist lateral forces by developing...?
bending
In conventional construction, wood stud walls are built with studs that are generally spaced at...?
16" on center
A single large footing that covers the entire floor area.
mat foundation
A mat foundation placed deep in the soil is called?
raft footing or compensated footing
A soil's load-bearing capacity increases with...?
depth
According to the IBC, a soft story is a story in which the lateral stiffness is less that __% of that in the story above or less than __% of the average stiffness of the stories above.
70% and 80%
In a typical building, the cost of the structure is generally what percentage of the total cost of construction?
25% to 30%
What are the following types of steel commonly used for?
A36
A325
A490
A449
A992
A36 - Structural Steel - most common
A325 - Bolt Grade - Residential
A490 - Bolt Grade - Construction
A449 - Bolt Grade - Construction
A992 - Structural Steel - high yeild
What is the general weight of concrete?
150 lbs. / cubic ft.
What is the weight of a gallon of water?
62.4 lbs. / cubic ft.
A single redi-mix truck carries approximately how many cu. yards of concrete?
10 cu. yds.
List the modulus of elasticity for the following materials...
Steel (Es)
Concrete (Ec)
Wood (Ew)
Es = 29,000 ksi
Ec = 3,000 - 5,000 ksi *
Ew = 1,000 - 2,000 ksi *

*depends on concrete mix or wood species
Wood I-Joists can generally span up to about...?
45 ft.