Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
9 Cards in this Set
- Front
- Back
SHUTOFF/EXT SW
|
Guarded 3 position SW
EXTNG- discharges ext agents into APU compartment CLOSE - closes APU fuel shutoff and bleed valves Disconnects APU gen from central DC bus Deenergizes the APU control panel |
|
FIRE warning light
|
Fire or overheat condition is sensed by fire detector
The red FIRE light illuminates and remains so until condition is eliminated |
|
Fire detect INOP light
|
If gas is lost from detector loop the INOP light illuminates
Amber APU light on MAP master CAUTION flashes INOP light also come on during main fire system test |
|
Bottle ABLE light
|
Illuminates only during test sequence means the bottle explosive firing circuits are intact
|
|
Fuel totalizer APU fuel consumption
|
Post mod 130 lb/ hr
|
|
APU starting
|
Min 22 volts
Max alt for start 20000 Speed 135-240 KIAS |
|
Smell of fumes in a/c
|
Shut down bleed from APU
|
|
If APU is shut down and the APU master switch has been turned off
|
Do not turn switch back on for at least one minute
|
|
To prevent electrical transients affecting sensitive electronic equipment
|
Place Backup Batt switch to ARM position prior to APU start
|