Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
23 Cards in this Set
- Front
- Back
What is the model of the tape machine?
|
Bonsai DVW500
|
|
how does first 9 pin cable connect?
|
Starts at the rear of the DVW500
Terminates on the sticker side of the removable faceplate |
|
What faceplate button do you hit after connecting the first 9 pin?
|
Remote
|
|
how does the second 9 pin cable connect?
|
starts on the non sticker side of faceplate
terminates in port 1 of the sync i/o |
|
how does the first bnc cable connect?
|
connects to the SDI out on DVW500
terminates at the SDI in on MOJO |
|
How does the first male stereo to male xlr cable connect?
|
connect stereo end to the audio out of the DVW500
Terminate the male xlr at mic 1 input on the patchbay |
|
How does the yellow audio cable connect?
|
Connect one end( whichever isn't xlr) to the time code out on DVW500
terminate male xlr to LTC on patchbay |
|
How does the split BNC cable connect?
|
Connect split end into MOJO's SVideo
Terminate connection at the monitor's SVideo in |
|
Which channel should the monitor be turned to?
|
Video 3
|
|
Do you launch Pro Tools before or after you set up your cables?
|
AFTER (Very important)
|
|
Once Pro Tools is launched where do you save you files to?
|
Media drive
|
|
How do you know if you have set up your remote properly?
|
The lights on the front will flash
|
|
What is the first menu you go to after launching pro tools and how do you get to it?
|
Machine control
Setup>peripherals>machine control |
|
Which is the only box that should be checked in the sync tabs?
|
Enable Sync HD
|
|
What settings should be made in the machine tab? (recheck question)
|
Machine type DVW500
Machine Tab Enable port 1 |
|
Which pro tools settings do you adjust after you're done with the perifrials?
|
Sync Setup
|
|
What settings do you apply to the sync setup?
|
Clock source int
clock reference: Loop Sync Positional reference: Serial Time Code TC:29.97 non-drop |
|
What does it mean when the green/yellow lights on the bottom glow solid?
|
The system is resolved
|
|
How many tracks do you make in your pro tools session?
|
2 (one video and one audio)
|
|
What settings do you apply to your video i/o (the ones that look like inserts on an audio track) in order top to bottom?
|
Input tab: SDI
Output tab: SVideo Video Format: NTSC Video Volume: Media |
|
After arming both tracks how do you go online?
|
CMD+J or option spacebar
|
|
When troubleshooting what is the first thing to check?
|
Are all my power cords plugged in?
|
|
If you're on video 3 and the monitor still has swigly lines going across it what is the likely cause?
|
the s video cables are on backwards
|