Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
92 Cards in this Set
- Front
- Back
Give a basic description of the M61A1 aircraft Gun |
6 Barrel rotary action automatic |
|
The M61A1 gun rotary mechanism works off of what aircraft system |
Hydraulic |
|
The M61A1 aircraft gun is Driven and Controlled |
Hydraulically- electrically |
|
The M61A1 gun has a pilot selectable firing rate of ------- low and --------- high |
4,000- 6000 |
|
What is the SWL of the F/A 18 gun system hoisting adapter? |
874lbs |
|
What series of ammunition is used in the M61A1 aircraft gun? |
M50 and PGU |
|
How is the M50 tries 20mm ammunition identified? |
Color and lettering |
|
What round of M50 series 20mm ammunition contains a fuze in the projectile? |
M505A3 |
|
What round of M50 series 20mm ammunition contains a fuze in the projectile? |
M505A3 |
|
What are the primary parts of the M61A1 gun? |
Barrels, Housing assembly, and rotor assembly |
|
What restrains individual barrel movement during firing? |
Muzzle clap assembly |
|
What restrains individual barrel movement during firing? |
Muzzle clap assembly |
|
The 6 barrels of the M61A1 Guilin are supported by what component? |
Stub rotor |
|
What component guides the rounds through the actions of the gun? |
Breech bolt assembly |
|
What secures the barrels to the rotor assembly? |
Three rows of interrupted locking lugs |
|
M61A1 uses what total amount of breech bolt assemblies? |
Six |
|
M61A1 uses what total amount of breech bolt assemblies? |
Six |
|
What component transmits the firing voltage to the primer of the round? |
Breech bolt assembly |
|
M61A1 uses what total amount of breech bolt assemblies? |
Six |
|
What component transmits the firing voltage to the primer of the round? |
Breech bolt assembly |
|
The barrels in the M61A1 gun are secured to the rotor assembly by what means? |
Interrupted locking lugs |
|
M61A1 uses what total amount of breech bolt assemblies? |
Six |
|
What component transmits the firing voltage to the primer of the round? |
Breech bolt assembly |
|
The barrels in the M61A1 gun are secured to the rotor assembly by what means? |
Interrupted locking lugs |
|
What provides the front mounting of the M51a1 gun |
Recoil adapter |
|
M61A1 uses what total amount of breech bolt assemblies? |
Six |
|
What component transmits the firing voltage to the primer of the round? |
Breech bolt assembly |
|
The barrels in the M61A1 gun are secured to the rotor assembly by what means? |
Interrupted locking lugs |
|
What provides the front mounting of the M51a1 gun |
Recoil adapter |
|
On the M61A1 gun, what is the bearing sector solenoid used for? |
Controls movement of clearing sector assembly |
|
M61A1 uses what total amount of breech bolt assemblies? |
Six |
|
What component transmits the firing voltage to the primer of the round? |
Breech bolt assembly |
|
The barrels in the M61A1 gun are secured to the rotor assembly by what means? |
Interrupted locking lugs |
|
What provides the front mounting of the M51a1 gun |
Recoil adapter |
|
On the M61A1 gun, what is the bearing sector solenoid used for? |
Controls movement of clearing sector assembly |
|
What controls the forward and aft movement of the breech Bol in the M61A1 gun? |
Rotor tracks |
|
What engages the rim of a round throughout the firing cycle? |
Extractor lip |
|
What engages the rim of a round throughout the firing cycle? |
Extractor lip |
|
Where is the extractor lip locate on the gun |
Front of each breech bolt assembly |
|
What engages the rim of a round throughout the firing cycle? |
Extractor lip |
|
Where is the extractor lip locate on the gun |
Front of each breech bolt assembly |
|
What component is used to check the gun barrels after fire |
Bore erosion gage |
|
What engages the rim of a round throughout the firing cycle? |
Extractor lip |
|
Where is the extractor lip locate on the gun |
Front of each breech bolt assembly |
|
What component is used to check the gun barrels after fire |
Bore erosion gage |
|
On the M61A1 gun, the lubricator assembly is externally attached to what other assembly |
Gun housing |
|
What engages the rim of a round throughout the firing cycle? |
Extractor lip |
|
Where is the extractor lip locate on the gun |
Front of each breech bolt assembly |
|
What component is used to check the gun barrels after fire |
Bore erosion gage |
|
On the M61A1 gun, the lubricator assembly is externally attached to what other assembly |
Gun housing |
|
The lubricator assembly is attached to what other assembly |
Housing assembly |
|
On the M61A1 when does the firing cycle begin |
Wham power is applied the the firing contact assembly |
|
On the M61A1 when does the firing cycle begin |
Wham power is applied the the firing contact assembly |
|
The clearing cycle of the M61A1 gun starts at what time |
When the breech bolt assembly returns the empty case to the guide bar |
|
On the M61A1 when does the firing cycle begin |
Wham power is applied the the firing contact assembly |
|
The clearing cycle of the M61A1 gun starts at what time |
When the breech bolt assembly returns the empty case to the guide bar |
|
Ammunition is guided into the extractor lip on a breech bolt assembly by what? |
Guide bar fingers |
|
Empty ammunition cases are removed from the bolt assembly chamber by what |
Extractor lip |
|
What would happen if the clearing sector arm was not installed |
Gun would not fire |
|
What would happen if the clearing sector arm was not installed |
Gun would not fire |
|
What diverts the succeeding bolt assemblies into the clearing can path |
Clearing sector arm |
|
What forces the bolt locking block upward when the clearing solenoid is deactivated |
Leaf springs |
|
What provides a path from the entrance unit to the exit unit through which conveyor elements pass |
Bypass chute |
|
The ammunition handling system in F/A-18 can hold a maximum of how many rounds |
578 rounds |
|
The ammunition handling system in F/A-18 can hold a maximum of how many rounds |
578 rounds |
|
How is the gun mounted in the F/A-18 aircraft |
Internally mounted in the nose of the aircrafts centerline |
|
The ammunition handling system in F/A-18 can hold a maximum of how many rounds |
578 rounds |
|
How is the gun mounted in the F/A-18 aircraft |
Internally mounted in the nose of the aircrafts centerline |
|
What position should manual clearing handle remain in until you are actually performing gun arming procedures |
Cleared position |
|
What condition if any required when ammunition is loaded into the lals |
A RADHAZ free environment |
|
The lals is not loaded or downloaded on the flight deck of an aircraft for what reason |
The flight deck is not a RAZHAD safe area |
|
The lals 1 can hold a maximum of how many 20mm ammunition |
1400 |
|
The GFK-21/E32K-7Ammunition loader (LALS II) can hold a max of how many rounds of 20mm ammunition |
1800 |
|
The GFK-21/E32K-7Ammunition loader (LALS II) can hold a max of how many rounds of 20mm ammunition |
1800 |
|
What level of maintenance performs maintenance on LALS |
I level |
|
The GFK-21/E32K-7Ammunition loader (LALS II) can hold a max of how many rounds of 20mm ammunition |
1800 |
|
What level of maintenance performs maintenance on LALS |
I level |
|
What series of ammunition is use with LALS |
M50 and PGU series |
|
At what round interval ate the breech- bolt assemblies changed in the M61A1 GUN |
15000 |
|
At what round interval ate the breech- bolt assemblies changed in the M61A1 GUN |
15000 |
|
Scheduled maintenance on the M61A1 gun for the handling and drive system is set at an interval of how many rounds |
30000. |
|
At what round interval ate the breech- bolt assemblies changed in the M61A1 GUN |
15000 |
|
Scheduled maintenance on the M61A1 gun for the handling and drive system is set at an interval of how many rounds |
30000. |
|
The M61A1 gun is sent to depot level for overhaul at what round interval |
120,000 |
|
LIST,IN SEQUENCE,THE SIX OPERATIONS THE BREECH-BOLT ASSEMBLY PERFORMS DURING A FULL FIRING CYCLE. |
FEED,CHAMBER,LOCK AND FIRE,UNLOCK,EXTRACT, AND EJECT
|
|
THE M61A1 GUN CONTINUES TO RECIEVE ROUNDS DURING THE CLEARING CYCLE.WHAT COMPONENT EJECTS ALL UNFIRED ROUNDS ?
|
GUIDE BAR CAM FINGERS
|
|
LIST THE MAJOR PARTS OF THE DRUM UNIT ASSEMBLY |
THE DRUM UNIT,ENTRANCE COVER,EXIT COVER,AND SCOOP DISK
|
|
THE ROUNDS ARE GUIDED INTO AND OUT OF THE EXTRACTOR LIP OF THE BREECH-BOLT ASSEMBLIES BY ?
|
THE GUIDE-BAR
|
|
LIST THE PARTS CONTAINED IN THE MAIN BODY OF THE ROTOR ASSEMBLY
|
ROTOR TRACKS,ROTOR DRIVE GEAR,AND THE LOCKING LUGS
|
|
NAME THE TWO CYCLES OF THE M61A1 GUN
|
FIRING CYCLE AND THE CLEARING CYCLE
|
|
WHAT LUBRICANT SHOULD YOU USE FOR THE M61A1 GUN ?
|
DOD-L-85336
|
|
THE MAIN CAM PATH IS----- SHAPED |
ELLIPTICAL SHAPED.
|