Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
The release speeds for arming an M904 fuze fall into what range??
|
170 to 525 knots
|
|
Normally, electrical fuzes are charged after what happens??
|
The bomb has been released from the rack or shackle.
|
|
For information on the fuzes currently used by the Navy, you should refer to which NAVAIR publications??
|
11-1F-2 and 11-5A-17
|
|
At impact, what compontnt drives the stricker body and firing pin down into the M( delay element??
|
The forward part of the fuze body.
|
|
The M904 serise fuze is designed to be used in what configuration??
|
The nose of Mk 80 serise LDGP bombs only.
|
|
An M904 series mechanical fuze can be configured for what arming delay time and in what increments.
|
2 to 18 sec
2-sec increments |
|
Other than non-delay, what function delay times are provided by the M9 delay element??
|
.01, .025, .05, .1, and .25
|
|
What mechanical fuze should be used with thermally protected Mk 80 series general purpose bombs??
|
M904E1
|
|
To set the 2- and 4-second arming delay times in the M904 mechanical time fuze, you should take which action??
|
Remove the stop screw
|
|
You should NEVER try to reinstall the stop screw on an M904 mechanical time fize in which delay settings??
|
2 and 4-second
|
|
What conditions pertain to the M904 mechanical time fuze??
|
Safe, Partially armed, and fully armed.
|
|
When the M904E4 mechanical time fuze is partially armed what indication should you see in the upper observation window??
|
A green background with no numbers visible.
|
|
At what point is the firing train in an M904 mechanical time fuze fully armed??
|
When the preselected arming delay period elapses.
|