Amr Ch. 2 Hsc-21

Front 1

What is the primary purpose of technical pubs?

Back 1

To help perform assigned maintenance tasks

Front 2

For a description of the NAVAIR technical
manual program, you should refer to what
publication?

Back 2

NAVAIR 00-25-100

Front 3

What are the two major types of technical
manuals?
1. Operational and maintenance
2. Conventional and work package (WP)
3. Organizational and intermediate
4. Commercial and conventional

Back 3

1. Operational and maintenance

Front 4

Which of the following format styles can be
found in technical manuals?
1. Conventional and work package (WP)
2. Commercial and conventional
3. Simple and complex
4. Organizational and intermediate

Back 4

1. Conventional and work package (WP)

Front 5

The format of a publication should be
designed to improve which of the following
key aspects?
1. Readability
2. Reproduction of pages
3. Replacement of page changes
4. Usability

Back 5

4. Usability

Front 6

Each work package of a work package type
of manual contains all information required
to perform a specific task on an aircraft
system.
1. True
2. False

Back 6

1. True

Front 7

Where does the WP identification number
appear on a page in a WP manual?
1. Top center
2. Top left comer
3. Top right comer
4. Bottom center

Back 7

3. Top right corner

Front 8

A WP number consists of what total
number of digits?
1. 12
2. 10
3. 8
4. 5

Back 8

4. 5

Front 9

Technical manuals are updated by what
means?
1. Changes and revisions
2. Notices
3. RACs
4. Difference data sheets

Back 9

1. Changes and revisions

Front 10

What technical publication update method involves the complete reissue of a replacement manual with all change information incorporated?
1. R A C
2. Revision
3. Notice
4. Change

Back 10

2. Revision

Front 11

Technical Publication Deficiency Reports
(TPDRs) usually result from fleet inputs
that include changes for which of the
following reasons?
1. To correct user-detected errors
2. To improve verbiage
3. To incorporate a “better way”
4. Each of the above

Back 11

4. Each of the above

Front 12

Which of the following numbers indicates a
illustration has been added to a
maintenance manual because of an issued
change?
1. 2-1B
2. 2-1.1
3. 2-Bl
4. 2.1-1

Back 12

1. 2-1B

Front 13

Which of the following occurrences in a
manual does NOT require an associated
change symbol?
1. Blank spaces resulting from the
deletion of text material
2. Relocation of material that changes
procedures of an inspection
3. Incorporation of a part on an
illustration
4. New material on an added page

Back 13

1. Blank spaces resulting from the
deletion of text material

Front 14

What method is used to incorporate a minor design change to equipment without making a direct impact on the ezisting information contained in a manual?

Back 14

3. Difference data sheet

Front 15

In a WP manual, what information is
contained in the numerical index of
effective WPs?

Back 15

4. All changed, revised, added, or deleted
WPs

Front 16

A change symbol in a WP manual is
required for changes to which of the
following elements?

Back 16

4. Diagrams, line drawings, and
illustrations

Front 17

A NAVAlR manual number consists of
what parts?

Back 17

3. A letter prefix and three additional
parts

Front 18

What is identified by part I of the
publication number?

Back 18

3. The category of manual

Front 19

What portion of NAVAIR publication
number NAVAIR 01-75PAC-1 specifies
the type aircraft and the manufacturer of the
aircraft to which the publication applies?

Back 19

2. 75PAC only

Front 20

What portion of NAVAIR publication
number NAVAIR 0l-85AD-1 signifies the
publication is a NATOPS manual?

Back 20

3. -1

Front 21

The purpose of the TMINS is to meet the
requirements of all systems commands to
obtain what standardized information
concerning technical manuals and changes?
1. Identification only
2. Referencing only
3. Requisitioning only
4. Identification, referencing, and
requisitioning

Back 21

4. Identification, referencing, and
requisitioning

Front 22

TMINS numbers for manuals are patterned
after what numbering system?
1. National Stock Number System
2. Subject Serial Number
3. Standard Subject Classification Code
4. Unit Identification System

Back 22

1. National Stock Number System

Front 23

The publication identifier (PI) is the root of
the TMINS number. It contains a total of
how many characters?
1. 13
2. 12
3. 11
4. 10

Back 23

1. 13

Front 24

What information is identified by the first
seven characters of the PI?
1. The technical manual
2. The Standard Subject Classification
code
3. The subject serial number
4. The hardware or subject identifier

Back 24

4. The hardware or subject identifier

Front 25

What information is identified by the frost
letter in the PI?
1. The subject serial number
2. The responsible command
3. The type of manual
4. The Standard Subject Classification
code

Back 25

2. The responsible command

Front 26

What information is identified by the
second group of characters in the PI?
1. The subject serial number
2. The responsible command
3. The type of manual
4. The Standard Subject Classification
code

Back 26

4. The Standard Subject Classification
code

Front 27

What information is identified by the third
group of characters in the PI?
1. The subject serial number
2. The responsible command
3. The type of manual
4. The Standard Subject Classification
code

Back 27

1. The subject serial number

Front 28

The first group of characters in the
technical manual identifier consists of three
letters or numbers. This group is known as
the TM
1. issue
2. identifier
3. serial number
4. acronym

Back 28

4. acronym

Front 29

The third group of characters in the
technical manual identifier consists of a
single number or letter. It is known as the
TM
1. issue
2. identifier
3. serial number
4. acronym

Back 29

2. identifier

Front 30

TIMINS identifies classified publications
by what means?
1. Total PI composition
2. The PI prefix
3. The PI subject serial number
4 . The PI suffix

Back 30

4 . The PI suffix

start at 2-31

Front 31

What manual gives a comprehensive
explanation of the TMINS?
1. NAVAIR 00-500AV
2. NAVAIR 00-500B
3. M0000-00/TMINS
4. N0000-00-IDX-000/TMS

Back 31

4. N0000-00-IDX-000/TMS

Front 32

Which section of the MIM covers
component repair procedures for
intermediate-level maintenance?
1. Section I
2. Section II
3. Section III
4. Section IV

Back 32

4. Section IV

Front 33

For which of the following reasons are
sections of MIMs now issued as separate
publications under individual identifying
numbers?
1. Less expensive to produce
2. Easier to use only
3. Easier procurement, storage, filing,
and use
4. Easier replacement

Back 33

3. Easier procurement, storage, filing,
and use

Front 34

A listing of weapons systems component
parts keyed to illustrations is provided in
what type of manual?
1. Maintenance Instruction Manual
2. Structural Repair Manual
3. Illustrated Parts Breakdown manual
4. Aircraft Maintenance Manual

Back 34

3. Illustrated Parts Breakdown manual

Front 35

All aeronautical publications, changes,
technical directives, and forms issued by
NAVAIRSYSCOM are cataloged in the
Naval Aeronautic Publications Index
(NAPI).
1. True
2. False

Back 35

1. True

Front 36

The Naval Aeronautic Publications Index
(NAPI) consists of how many sections?
1. Six
2. Two
3. Eight
4. Four

Back 36

1. Six

Front 37

What aircraft maintenance division
normally maintains a complete NAPI?
1. Maintenance material control
2. Administration
3. Quality assurance
4. Armament

Back 37

3. Quality assurance

Front 38

For more in-depth information concerning the NAPI, you should refer to which of the following publications?
1. NAVAIR 00-25-100
2. NAVAIR 00-80T-96
3. NAVAIR 01-1A-540
4. NAVAIR 0l -85ADC-1

Back 38

1. NAVAIR 00-25-100

Front 39

What series of manuals covers standard
aviation maintenance practices that apply to
all aircraft?
1. -1
2. 01-1A
3. 01-1B
4. -8

Back 39

2. 01-1A

Front 40

Large, high-density avionics aircraft with
computer-controlled, integrated weapons
systems use what type of manual to aid the
aircrew in maintaining large analysis and
single flow data?
1. Structural repair manual
2. Support equipment manual
3. NATOPS manuals
4. Crew station manuals

Back 40

4. Crew station manuals

Front 41

Large, high-density avionics aircraft with
computer-controlled, integrated weapons
systems use what type of manual to help the
aircrew troubleshoot and repair equipment
to maintain mission capability while still
airborne?
1. Structural repair manual
2. Support equipment manual
3. NATOPS manuals
4. In-flight maintenance manual

Back 41

4. In-flight maintenance manual

Front 42

What NAVAIR manual contains basic structural repair data common to all aircraft?
1. NAVAIR 00-25-100
2. NAVAIR 01-1A-1
3. NAVAIR 01-1A-540
4. NAVAIR 01-85ADC-1

Back 42

2. NAVAIR 01-1A-1

Front 43

When you see a publication numbered
NAVAIR XX-XXX-4, you know that this
manual is of what type?
1. Maintenance Instruction Manual
2. Illustrated Parts Breakdown
3. Structural Repair Manual
4. Work Unit Code Manual

Back 43

2. Illustrated Parts Breakdown

Front 44

The Planned Maintenance System
publications consist of what type or types
of cards or charts?
1. MRCs only
2. PMICs only
3. SCCs only
4. MRCs, PMICs, and SSCs

Back 44

4. MRCs, PMICs, and SSCs

Front 45

What PMS publication provides
information in an abbreviated walkaround
order to aid personnel when they inspect
aircraft surfaces?
1. Turnaround checklist
2. Daily MRC
3. Phase maintenance requirements cards
4. Periodic maintenance information
Cards

Back 45

1. Turnaround checklist

Front 46

What safety publication contains
information and guidelines on acceptable
work place safety and health standards
ashore?
1. OPNAVINST 3750.6
2. OPNAVINST 5100.23
3. NAVAIR A1-NAOSH-SAF-
000/P5100-1
4. NAVAIR 00-25-100

Back 46

3. NAVAIR A1-NAOSH-SAF-
000/P5100-1

Front 47

A technical directive change directs the
accomplishment and recording of a material
change, a repositioning, a modification, or
an alteration in the characteristics of the
equipment to which it applies.
1. True
2. False

Back 47

1. True

Front 48

A technical directive that is issued to
clarify, add to, delete from, make a minor
requirement change, or cancel an existing
technical directive is known as what type of
technical directive?
1. Bulletin
2. Change
3. Revision
4. Amendment

Back 48

4. Amendment

Front 49

Which of the following symbols designates
the second revision to a TD?
1. Rev. 1
2. Rev. 2
3. Rev. A
4. Rev. B

Back 49

4. Rev. B

Front 50

A technical directive is issued to correct a
safety condition that could result in fatal or
serious injury to personnel. What type of
technical directive is this?
1. Routine
2. Immediate action
3. Urgent
4. Record purpose

Back 50

2. Immediate action

Front 51

The overall management of the technical
library is a function of what activity or
individual?
1. Quality assurance division
2. Commanding officer
3. Central library supervisor
4. Material control division

Back 51

1. Quality assurance division

Front 52

What form does the dispersed librarian sign
to indicate the receipt of a publication
change from the central library?
1. DD Form 1348
2. NWPL (OPNAV Form 5070/11)
3. CECR (OPNAV Form 5070/12)
4. OPNAV Form 4790/66

Back 52

3. CECR (OPNAV Form 5070/12)

Front 53

Routine deficiencies in technical
publications are reported via OPNAV Form
4790/66 to what command or commands?
1. CNO
2. NATSF only
3. CFA only
4. NATSF and CFA

Back 53

4. NATSF and CFA

Front 54

When an activity with a central library has
other libraries within the command,
dispersed technical publications libraries
(DTPLs), what organizational element of
the activity manages these libraries?
1. The CTPL
2 . QA
3. Admin
4. Material control

Back 54

1. The CTPL

Front 55

At least how often does QA audit the
CTPL?
1. Monthly
2. Quarterly
3. Biannually
4. Annually

Back 55

4. Annually

Front 56

Information about discrepancies or change
recommendations of a routine nature on the
technical content of a NATOPS should be
submitted on what form?
1. OPNAV Form 4790/66
2. OPNAV Form 4790/12
3. OPNAV Form 5300/32
4. OPNAV Form 3500/22

Back 56

4. OPNAV Form 3500/22