Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
81 Cards in this Set
- Front
- Back
what is the primary purpose of technical publications?
1. to train nonmaintenance personnel 2. to replace technical training requirements 3. to help you perform your assigned maintenance 4. to support logistics |
3. to help you perform your assigned maintenance
|
|
for a description of the NAVAIR technical manual program, you should refer to what publication?
1. NAVSUP 2002 2. NAVAIR 00-25-100 3. NAVAIR 00-500A 4. NAVAIR 00-500B |
2. NAVAIR 00-25-100
|
|
what are the two major types of technical manuals?
1. operational and maintenance 2. conventional and work package (WP) 3. organizational and intermediate 4. commercial and conventional |
1. operational and maintenance
|
|
which of the following format styles can be found in technical manuals?
1. conventional and work package (WP) 2. commercial and conventional 3. simple and complex 4. organizational and intermediate |
1. conventional and work package (WP)
|
|
the format of a publication should be designed to improve which of the following key aspects?
1. readability 2. reproduction of pages 3. replacement of page changes 4. usability |
4. usability
|
|
each work package of a work package type of manual contains all information required to perform a specific task on an aircraft system.
1. true 2. false |
1. true
|
|
where does the WP identification number appear on a page in a WP manual?
1. top center 2. top left corner 3. top right corner 4. bottom center |
3. top right corner
|
|
a WP number consists of what total number of digits?
1. 12 2. 10 3. 8 4. 5 |
1. 12
|
|
technical manuals are updated by what means?
1. changes and revisions 2. notices 3. RACs 4. difference data sheets |
1. changes and revisions
|
|
what technical publication update method involves the complete reissue of a replacement manual with all change information incorporated?
1. RAC 2. revision 3. notice 4. change |
3. revision
|
|
Technical Publication Deficiency Reports (TPDR's) usually result from fleet inputs that include changes for which of teh following reasons?
1. to correct user-detected errors 2. to improve verbiage 3. to incorporate a "better way" 4. each of the above |
4. each of the above
|
|
which of the following numbers indicates an illustration has been added to a maintenance manual because of an issued change?
1. 2-1B 2. 2-1.1 3. 2-B1 4. 2.1-1 |
1. 2-1B
|
|
which of the following occurrences in a manual does NOT require an associated change symbol?
1. blank spaces resulting from the deletion of text material 2. relocation of material that changes procedures of an inspection 3. incorporation of a part on an illustration 4. new material on an added page |
1. blank spaces resulting from the deletion of text material
|
|
what method is used to incorporate a minor design change to equipment without making a direct impact on the existing information contained in a manual?
1. revision 2. change 3. difference data sheet 4. rapid action change |
3. difference data sheet
|
|
in a WP manual, what information is contained in the numerical index of effective WPs?
1. all changed pages only 2. all deleted WPs only 3. all revised WPs only 4. all changed, revised, added, or deleted WPs |
4. all changed, revised, added, or deleted WPs
|
|
a change symbol in a WP manual is required for changes to which of the following elements?
1. IPB illustrations 2. diagrams only 3. line drawings only 4. diagrams, line drawings, and illustrations |
4. diagrams, line drawings, and illustrations
|
|
A NAVAIR manual number consists of what parts?
1. a letter prefix and one additional part 2. a numerical prefix and two additional parts 3. a letter prefix and three additional parts 4. a numerical prefix and four additional parts |
2. a numerical prefix and two additional parts
|
|
what is identified by part 1 of the publication number?
1. the general subject classification 2. the type of manual 3. the category of manual 4. the group of manual |
3. the category of manual
|
|
what portion of NAVAIR publication number NAVAIR 01-75PAC-1 specifies the type aircraft and the manufacturer of the aircraft to which the publication applies?
1. 01-75 only 2. 75PAC only 3. 01-75PAC 4. PAC-1 |
2. 75PAC only
|
|
what portion of NAVAIR publication number NAVAIR 01-85AD-1 signifies the publication is a NATOPS manual?
1. 01 2. -85AD 3. -1 4. AD-1 |
3. -1
|
|
the purpose of the TMINSis to meet the requirements of all systems commands to obtain what standardized information converning technical manuals and changes?
1. identification only 2. referencing only 3. requisitioning only 4. identification, referencing, and requisitioning |
4. identification, referencing, and requisitioning
|
|
TMINS numbers for manuals are patterned after what numbering system?
1. national stock number system 2. subject serial number 3. standard subject classification code 4. unit identification system |
1. national stock number system
|
|
the publication identifier (PI) is the root of the TMINS number. it contains a total of how many characters?
1. 13 2. 12 3. 11 4. 10 |
1. 13
|
|
what information is identified by the first seven characters of the PI?
1. the technical manual 2. the standard subject classification code 3. the subject serial number 4. the hardware or subject identifier |
4. the hardware or subject identifier
|
|
whta information is identified by the frost letter in the PI?
1. the subject serial number 2. the responsible command 3. the type of manual 4. the standard subject classification code |
2. the responsible command
|
|
what information is identified by the second group of characters in the PI?
1. the subject serial number 2. the responsible command 3. the type of manual 4. the standard subject classification code |
4. the standard subject classification code
|
|
what information is identified by the third group of characters in the PI?
1. the subject serial number 2. the responsible command 3. the type of manual 4. the standard subject classification code |
1. the subject serial number
|
|
the first group of characters in the technical manual identifer consists of three letters or numbers. this group is known as the TM
1. issue 2. identifier 3. serial number 4. acronym |
4. acronym
|
|
the third group of characters in the technical manual identifierconsists of a single number or letter. it is known as the TM
1. issue 2. identifier 3. serial number 4. acronym |
1. issue
|
|
TIMINS identifies classified publications by what means?
1. total PI composition 2. the PI prefix 3. the PI subject serial number 4. the PI suffix |
4. the PI suffix
|
|
what manual gives a comprehensive explanation of the TMINS?
1. NAVAIR 00-500AV 2. NAVIAR 00-500B 3. M0000-00/TMINS 4. N0000-00-IDX-000/TMS |
4. N0000-00-IDX-000/TMS
|
|
which section of the MIM covers component repair procedures for intermediate-level maintenance?
1. section I 2. section II 3. section III 4. section IV |
4. section IV
|
|
for which of the following reasons are sections of MIMs now issued as separate publications under individual identifying numbers?
1. less expensive to produce 2. easier to use only 3. easier procurement, storage, filing, and use 4. easier replacement |
3. easier procurement, storage, filing, and use
|
|
a listing of weapons systems component parts keyed to illustrations is provided in what type of manual?
1. maintenance instruction manual 2. structural repair manual 3. illustrated parts breakdown manual 4. aircraft maintenance manual |
3. illustrated parts breakdown manual
|
|
all aeronautical publications, changes, technical directives, and forms issued by NAVAIRSYSCOM are cataloged in the naval aeronautic publications index (NAPI)
1. true 2. false |
1. true
|
|
the naval aeronautic publications index (NAPI) consists of how many sections?
1. six 2. two 3. eight 4. four |
1. six
|
|
what aircraft maintenance division normally maintains a complete NAPI?
1. maintenance material control 2. administration 3. quality assurance 4. armament |
3. quality assurance
|
|
for more in-depth information concerning the NAPI, you should refer to which of the following publications?
1. NAVAIR 00-25-100 2. NAVAIR 00-80T-96 3. NAVAIR 01-1A-540 4. NAVAIR 01-85ADC-1 |
1. NAVAIR 00-25-100
|
|
what series of manual covers standard aviation maintenance practices that apply to all aircraft?
1. -1 2. 01-1A 3. 01-1B 4. -8 |
1. 01-1A
|
|
large, high-density avionics aircraft with computer-controlled, integrated weapons systems use what type of manual to aid the aircrew in maintaining large analysis and single flow data?
1. structural repair manual 2. support equipment manual 3. NATOPS manuals 4. crew station manuals |
4. crew station manuals
|
|
large, high-density avionics aircraft with computer-controlled, integrated weapons systems use what type of manual to help the aircrew troubleshoot and repair equipment to maintain mission capability while still airborne?
1. structural repair manual 2. support equipment manual 3. NATOPS manuals 4. in-flight maintenance manual |
4. in-flight maintenance manual
|
|
what NAVAIR manual contains basic structural repair data common to all aircraft?
1. NAVAIR 00-25-100 2. NAVAIR 01-1A-1 3. NAVAIR 01-1A-540 4. NAVAIR 01-85ADC-1 |
2. NAVAIR 01-1A-1
|
|
when you see a publication numbered NAVAIR XX-XXX-4, you know that this manual is of what type?
1. maintenance instruction manual 2. illustrated parts breakdown 3. structural repair manual 4. work unit code manual |
2. illustrated parts breakdown
|
|
the planned maintenance system publications consist of what type or types of cards or charts?
1. MRCs 2. PMIC's 3. SCC's 4. MRC's, PMIC's, and SSC's |
4. MRC's, PMIC's, and SSC's
|
|
what PMS publication provides information in an abbreviated walkaround order to aid personnel when they inspect aircraft surfaces?
1. turnaround checklist 2. daily MRC 3. phase maintenance requirements cards 4. periodic maintenance information cards |
1. turnaround checklist
|
|
what safety publication contains information and guidelines on acceptable work place safety and health standards ashore?
1. OPNAVINST 3750.6 2. OPNAVINST 5100.23 3. NAVAIR A1-NAOSH-SAF-000/P5100-1 4. NAVAIR 00-25-100 |
3. NAVAIR A1-NAOSH-SAF-000/P5100-1
|
|
a technical directive change directs the accomplishment and recording of a material change, a repositioning, a modification, or an alteratioin in the characteristics of the equipment to which is applies.
1. true 2. false |
1. true
|
|
a technical directive that is issued to clarify, add to, delete from, make a minor requirement change, or cancel an existing technical directive is known as what type of technical directive?
1. bulletin 2. change 3. revision 4. amendment |
2. change
|
|
which of the following symbols designates the second revision to a TD?
1. rev. 1 2. rev. 2 3. rev. A 4. rev. B |
4. rev. B
|
|
a technical directive is issued to correct a safety condition that could result in fatal or serious injury to personnel. what type of technical directive is this?
1. routine 2. immediate action 3. urgent 4. record purpose |
2. immediate action
|
|
the overall management of the technical library is a function of what activity or individual?
1. quality assurance division 2. commanding officer 3. central library supervisor 4. material control division |
1. quality assurance division
|
|
what form does the dispersed librarian sign to indicate the receipt of a publication change from the central library?
1. DD form 1348 2. NWPL (OPNAV form 5070/11) 3. CECR (OPNAV form 5070/12) 4. OPNAVE form 4790/66 |
3. CECR (OPNAV form 5070/12)
|
|
routine deficiencies in technical publications are reported via OPNAV form 4790/66 to what command or commands?
1. CNO 2. NATSF only 3. CFA only 4. NATSF and CFA |
4. NATSF nad CFA
|
|
when an activity with a central library has other libraries within the command, dispersed technical publications libraries (DTPL's), what organizational element of the activity manages these libraries?
1. the CTPL 2. QA 3. admin 4. material control |
1. the CTPL
|
|
at least how often does QA audit the CTPL?
1. monthly 2. quarterly 3. biannualy 4.. annually |
4. annually
|
|
information about discrepancies or change recommendations of a routine nature on the technical content of a NATOPS should be submitted on what form?
1. OPNAV form 4790/66 2. OPNAV form 4790/12 3. OPNAV form 5300/32 4. OPNAV form 3500/22 |
1. OPNAV form 4790/66
|
|
which of the following numbers is a supply project code?
1. 6RX-4920-00-237-97934X 2. AN6227-7 3. AK7 4. 63425 |
3. AK7
|
|
information from which of teh following sources is used by supply department personnel as justification for stocking material?
1. forecasted flights 2. usage statistics 3. management decisions 4. montly maintenance plans |
2. usage statistics
|
|
which of the following numbers is listed first in an alphanumeric parts listing?
1. 80T1384 2. AN6437 3. 216849 4. 0836948 |
2. AN6437
|
|
which of the following part numbers follows sequence number 08643759 in an alphanumeric listing?
1. 943762 2. P46843 3. ZB4738 4. 064795 |
1. 943762
|
|
what type of code identifies the agent or agency that has design control over an item?
1. CAGE 2. H4/H8 3. MCRL 4. ML-N |
CAGE
|
|
which of the following is a purpose of an illustrated parts breakdown?
1. to allow supply and maintenance personnel to identifiy and order replacement parts for aircraft or equipment 2. to determine interchangeables, next higher assemblies, and repairables 3. to determine source codes, CAGES, and source of supply 4. to determine units used for assembly and aircraft bureau number application |
1. to allow supply and maintenance personnel to identify and order replacement parts for aircraft or equipment
|
|
what section in an IPB contains general information and instructions for using the publication?
1. introduction 2. group assembly parts list 3. numerical index 4. alphabetical index |
1. introduction
|
|
besides the introduction, each IPB includes which of the following information?
1. table of contents or alphabetic index 2. group assembly parts list 3. numerical index 4. each of the above |
4. each of the above
|
|
what section of the IPB contains an explanation of the source or SM&R codes used in the IPB?
1. introduction 2. group assembly parts list 3. numerical index 4. alphabetical index |
1. introduction
|
|
what listing in the IPB lists aircraft assemblies and identifies the pages or figure numbers where the assemblies are shown in the IPB?
1. alphabetical index 2. group assembly parts list 3. numerical index 4. introduction |
1. alphabetical index
|
|
what section of the IPB contains a description of a component listed in the IPB?
1. introduction 2. group assembly parts list 3. numerical index 4. alphabetical index |
2. group assembly parts list
|
|
what section of the IPB lists supplementary handbooks to which you may refer?
1. introduction 2. group assembly parts list 3. numerical index 4. alphabetical index |
1. introduction
|
|
what is the purpose of an index number in an IPB?
1. to describe a major component 2. to establish the relationship between parts in the illustration and the corresponding parts list 3. to identify items procured from a commercial source 4. to provide a reference number |
2. to establish the relationship between parts in the illustration and the corresponding parts list
|
|
you need to order a replacement component for an aircraft, and you do not know the part number of the item. which of the following basic information should you be able to provide the
AK so that he or she can research the IPB? 1. type of aircraft on which the part was installed 2. the component on which the part was installed 3. the bureau number of the aircraft from which part was removed 4. all of the above |
4. all of the above
|
|
an SM&R code is a five or six position alphanumeric code.
1. true 2. false |
1. true
|
|
which of the following is NOT a concern of the work center supervisor?
1. know your personnel and their limitations 2. see that the job is done correctly and safely 3. conduct the monthly maintenance plan meeting 4. train your personnel to do the best job possible |
3. conduct the monthly maintenance plan meeting
|
|
which of the following is NOT considered a typical duty or responsibility of a supervisor?
1. promote teamwork 2. inspect every task upon completion 3. maintain liaison with other work centers 4. ensure personnel and equipment safely |
2. inspect every task upon completion
|
|
the operational efficiency of a work center is dependent to a large extent upon what factor?
1. the number of people assigned 2. the backlog in workload 3. the arrangement of the work spaces and equipment 4. the experience level of the division |
3. the arrangement of the work spaces and equipment
|
|
which manual is used as a guidline for the establishment of an effective training program?
1. OPNAVINST 4790.2 2. OPNAV NOTICE 4790 3. SECNAVINST 4790.2 4. SECNAV NOTICE 4790 |
1. OPNAVINST 4790.2
|
|
which of the following factors add to your expenses and cut down on overall efficiency?
1. broken tools 2. misdirected efforts 3. injured personnel 4. all of the above |
4. all of the above
|
|
other than tracking test equipment, updating files/publications, and ensuring tools are safe, how can fuctions of the work center be further enhanced?
1. request more frequent Q/A audits 2. allow the division officer to care for the administrative details 3. judicious delegation of authority to other responsible petty officers 4. the supervisor must oversee every detail in the work center |
3. judicious delegation of authority to other responsible petty officers
|
|
which of the following types of maintenance is required by hours, calender periods, or starts?
1. unscheduled maintenance 2. scheduled maintenance 3. phase maintenance 4. intermediate level maintenance |
2. scheduled maintenance
|
|
what is condsidered one of the best tools for ensuring a smooth flow of maintenance information between shifts and other supervisors?
1. daily maintenance meeting 2. NALCOMIS 3. intercom system 4. work center supervisor |
1. daily maintenance meeting
|
|
which of the following repsonsiblities is a function of the QA division?
1. determining deficiencies 2. analyzing discrepancy trends 3. determining the quality of maintenance 4. each of the above |
4. each of the above
|
|
what is the concept of quality assurance?
1. training of maintenance inspectors 2. prevention of the occurrence of defects 3. ensuring that quality maintenance is performed 4. ensuring that quality inspections are performed |
2. prevention of the occurrence of events
|