Study your flashcards anywhere!

Download the official Cram app for free >

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

How to study your flashcards.

Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key

Up/Down arrow keys: Flip the card between the front and back.down keyup key

H key: Show hint (3rd side).h key

A key: Read text to speech.a key

image

Play button

image

Play button

image

Progress

1/53

Click to flip

53 Cards in this Set

  • Front
  • Back
Which of the following is NOT a concern of the work center supervisor?

1. Know your personnel and their limitations
2. See that the job is done correctly and safely
3. Conduct the Monthly Maintenance Plan meeting
4. Train your personnel to do the best job possible
Conduct the Monthly Maintenance Plan meeting
Which of the following is NOT considered a typical duty or responsibility of a supervisor?

1. Promote teamwork
2. Inspect every task upon completion
3. Maintain liaison with other work
centers
4. Ensure personnel and equipment safety
Inspect every task upon completion
The operational efficiency of a work center is dependent to a large extent upon what
factor?

1. The number of people assigned
2. The backlog in workload
3. The arrangement of the work spaces and equipment
4. The experience level of the division officer
The arrangement of the work spaces and equipment
Which manual is used as a guideline for the establishment of an effective training
program?
1. OPNAVINST 4790.2
2. OPNAV NOTICE 4790
3. SECNAVINST 4790.2
4. SECNAV NOTICE 4790
OPNAVINST 4790.2
Which of the following factors add to your
expenses and cut down on overall efficiency?
1. Broken tools
2. Misdirected efforts
3. Injured personnel
4. All of the above
All of the above
Other than tracking test equipment, updating files/publications, and ensuring tools are safe, how can functions of the work center be further enhanced?
1. Request more frequent Q/A audits
2. Allow the division officer to care for the administrative details
3. Judicious delegation of authority to other responsible petty officers
4. The supervisor must oversee every detail in the work center
Judicious delegation
Which of the following types of maintenance is required by hours, calender periods, or starts?
1. Unscheduled maintenance
2. Scheduled maintenance
3. Phase maintenance
4. Intermediate level maintenance
Scheduled maintenance
What is considered one of the best tools for ensuring a smooth flow of maintenance
information between shifts and other supervisors?
1. Daily maintenance meeting
2. NALCOMIS
3. Intercom system
4. Work center supervisor
Daily maintenance meeting
Which of the following responsibilities is a
function of the QA division?
1. Determining deficiencies
2. Analyzing discrepancy trends
3. Determining the quality of
maintenance
4. Each of the above
Each of the above
A periodic or special evaluation of details,
plans, and policies is known as a/an
1. QAR inspection
2. audit
3. special inspection
4. EI request
audit
What determines the success or failure in achieving high standards of quality?
1. Local instructions
2. Frame of mind of all personnel
3. Abundance of CDIs/QARs
4. Up-to-date test equipment
Frame of mind of all personnel
When, if ever, can CDI personnel certify
inspection of their own work?
1. When on a detachment
2. When in duty status and no other CDI is around
3. When authorized by the work center supervisor
4. Never
Never
QA division personnel will occasionally accompany plane captains during inspections. This accompaniment will
occur at what minimum interval?
1. Once a month
2. Once a quarter
3. Semiannually
4. Annually
Once a quarter
Completed check flight checklists are retained for what minimum period of time?
1. 3 months or one phase cycle, whichever is greater
2. 6 months or one phase cycle, whichever is greater
3. 9 months or one phase cycle, whichever is greater
4. 12 months or one phase cycle, whichever is greater
6 months or one phase cycle, whichever is greater
What factors determine the number of personnel assigned to a QA division?
1. Size of the unit and number of work shifts
2. Size of the command and type of aircraft
3. Size of the work spaces and number of aircraft
4. Size of the work spaces and number of work shifts
Size of the unit and number of work shifts
When a small OMD elects to organize a QA division, which of the following personnel should be permanently assigned?
1. All QARs
2. The QA officer only
3. The QA supervisor only
4. The QA officer and QA supervisor
The QA officer and QA supervisor
OMDs with only one work center in the maintenance department may have
qualified inspectors with what designation?
1. CDI
2. NDI
3. CDQAR
4. QAR
CDQAR
QARs have which of the following functions?
1. Reviewing incoming technical directives
2. Assisting in preparation of engineering investigation (EI) reports
3. Both 1 and 2 above
4. Inspecting their own work
Both 1 and 2 above
Which of the following is a requirement to become a QAR?
1. Be assigned to the work center the longest period of time
2. Be senior in grade and experience
3. Have prior experience as a work center supervisor
4. Have prior experience as a CDI
Be senior in grade and experience
Under certain specific conditions, CDQARs
may be assigned in work centers where they
are used in the same capacity as QARs who are assigned to the QA division.
1. True
2. False
True
Under which of the following
circumstances can an officer in charge of a detachment designate QA personnel?
1. When the CO of the squadron grants
this authority in writing to the officer in charge
2. When the deployment is in excess of 90 days
3. When all procedures and requirements for designating QA personnel are
accomplished by the detachment
4. Both 2 and 3 above
Both 2 and 3 above
What officer is authorized to designate CDQARs in an activity?
1. The CO
2. The AMO
3. The QA officer
4. The aircraft division officer
The AMO
At an AIMD maintenance activity, what personnel may use a QA stamp in place of a
signature?
1. QARs only
2. CDIs only
3. QARs and CDQARs only
4. CDIs, QARs, and CDQARS
CDIs, QARs, and CDQARS
If organizational activities desire to use QA
stamps, what personnel may use them?
1. CDIs and QARs only
2. CDIs and CDQARs only
3. CDQARs and QARs only
4. CDIs, CDQARs, and QARs
CDQARs and QARs only
What is the time requirement before a QA stamp may be reassigned?
1. 12 months
2. 9 months
3. 3 months
4. 6 months
3 months
If QA appears on an MRC, what person performs the inspection?
1. The CDI in the work center
2. The QAR in the work center
3. Either 1 or 2 above, depending on the workload
4. The QAR, CDQAR, or CDI that is annotated on the master and work center decks
The QAR, CDQAR, or CDI that is annotated on the master and work center decks
During in-flight maintenance, what person is authorized to sign as inspector if a
designated QA inspector is not available?
1. The senior aircrew maintenance person
2. The flight engineer
3. The pilot
4. The person who performed the maintenance
The senior aircrew maintenance person
After an in-flight discrepancy has been
signed off, what other inspection, if any, is
required when the aircraft has returned to home base?
1. A CDI must inspect the aircraft
2. The QA supervisor must inspect the
aircraft
3. A QAR must inspect the repairs if the
discrepancy involves safety of flight
4. None
A QAR must inspect the repairs if the
discrepancy involves safety of flight
Which of the following is NOT a management responsibility of the QA division?
1. QA audits
2. Technical publications
3. Tool Control Program
4. Maintenance department safety
3. Tool Control Program
Work center audits are conducted at what
minimum intervals?
1. Monthly
2. Quarterly
3. Semiannually
4. Annually
Quarterly
Upon completion of an audit, a report of the findings is submitted to the cognizant
division and what official?
1. The administration officer
2. The QA officer
3. The AMO
4. The MMCO
AMO
Audits are maintained on file for what minimum period of time?
1. 6 months
2. 1 year
3. 18 months
4. Until the next audit is completed
1 Year
Investigations and reports of naval aircraft mishaps that are not reported under
OPNAVINST 4790.2 are reported under what instruction?
1. OPNAVINST 5100.19
2. OPNAVINST 3120.32
3. OPNAVINST 3750.6
4. OPNAVINST P-5100
OPNAVINST 3750.6
Safety meetings are required to be held at what minimum intervals?
1. Weekly
2. Monthly
3. Quarterly
4. Semiannually
Monthly
The QA division is required to report deficiencies according to the OPNAVINST
4790.2 under the NAMDRP. What does NAMDRP denote?
1. Naval Assessment Manager’s
Discrepancy Reporting Plan
2. Navy Air Maintenance Department Discrepancy Reporting Program
3. Navy Air Maintenance Discrepancy Reporting Plan
4. Naval Aviation Maintenance
Discrepancy Reporting Program
Naval Aviation Maintenance
Discrepancy Reporting Program
In addition to EIs and ADRs, what reports are required under the NAMDRP?
1. HMR, QDR, and TPDRs only
2. HMR, EMR, QDR, and TPDRs
3. HRM, ER, QAR, and TDRs
4. HRM, EMR, QAR, and TDPRs
HMR, QDR, and TPDRs only
What officer, with assistance from QA, reviews all correspondence relating to
aircraft flight mishaps?
1. The aviation safety officer
2. The aircraft maintenance officer
3. The assistant aircraft maintenance
officer
4. The maintenance material control
The aviation safety officer
Changes or corrections to NATOPS manuals are reported by using procedures found in which of the following
publications or types of message?
1. OPNAVINST 3710.7
2. OPNAVINST 3510.12
3. Both 1 and 2 above
4. TPDR message
OPNAVINST 3710.7
Which of the following instructions contains procedures used by supply
activities to report deficiencies that result
from incorrect preservation, packing, marking, or handling?
1. OPNAVINST 4790.2
2. NAVSUPINST 3750.2
3. NAVAIRINST 3510.12
4. NAVSUPINST 4440.179
NAVSUPINST 4440.179
What type of report is used when a deficiency is discovered in materials that, if not corrected, could result in death or injury?
1. EI
2. ADR
3. HMR
4. TPDR
HMR
An HMR priority message must be submitted within a maximum of how many hours after the discovery of the
discrepancy?
1. 12
2. 24
3. 36
4. 48
24
An explosive incident is reported in accordance with what instruction?
1. OPNAVINST 5100.7
2. OPNAVINST 5215.1
3. OPNAVINST 8100.3
4. OPNAVINST 8600.2
OPNAVINST 8600.2
The term TFOA should be used on an HMR report that involves which of the following incidents?
1. A fuselage panel that falls off an aircraft while it is in flight
2. A request is made for technical information from NADEP
3. A safety of flight defect is discovered on a reworked aircraft
4. An item of material does not conform to specification requirements Engineering investigations consist of which of the following types of actions?
A fuselage panel that falls off an aircraft while it is in flight
Engineering investigations consist of which of the following types of actions?
1. Disassembly and inspection
2. Material analysis
3. Engineering assistance
4. Each of the above
Each of the above
Unless combined with an HMR, within what maximum period of time after you discover a deficiency must the EI request be submitted?
1. 24 hours
2. 5 working days
3. 10 working days
4. 30 calendar days
5 working days
What is the purpose of a Quality Deficiency
Report (QDR)?
1. To improve the quality assurance inspector’s performance
2. To improve the quality of parts that are removed for high time
3. To report deficiencies in quality during the rework or manufacturing process to improve the quality of work
4. To report on the quality of work performed at the inter- mediate
maintenance level
To report deficiencies in quality during the rework or manufacturing process to improve the quality of work
Technical Publication Deficiency Reporting
(TPDR) should NOT be used when you report deficiencies in which of the following documents?
1. Maintenance Requirements Cards
2. Work Unit Code Manuals
3. Illustrated Parts Breakdowns
4. OPNAV instructions
OPNAV instructions
What activity manages the ADR program?
1. NAVAVNDEPOTOPSCEN
2. COMNAVAIRSYSCOM
3. NATSF
4. OPNAV
NAVAVNDEPOTOPSCEN
The requirement for submission of the
initial ADR Form (SF 368) is within how long after the acceptance flight?
1. 5 working days
2. 10 working days
3. 15 days
4. 30 days
5 working days
When a misuse of equipment is witnessed and reported, which of the following personnel may submit the Support
Equipment (SE) Misuse/Abuse forms?
1. SE division officer
2. Safety officer
3. QA personnel
4. The witness to the misuse
The witness to the misuse
Which of the following procedures is used
by QA for a successful monitoring program?
1. Training quality QA representatives
2. Maintaining an up-to-date library
3. Maintaining up-to-date MIs
4. Conducting audits
Conducting audits
Which of the following is NOT a program monitored by QA?
1. FOD
2. Tool Control
3. Ordnance Loading/Handling Safety
4. Tire/Wheel Maintenance Safety
Ordnance Loading/Handling Safety
QA should use which of the following aids to monitor the different programs under its
cognizance?
1. Safety posters
2. Accident reports
3. MIs or NAMPSOPs
4. The experience of the work center supervisor
MIs or NAMPSOPs