Study your flashcards anywhere!

Download the official Cram app for free >

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

How to study your flashcards.

Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key

Up/Down arrow keys: Flip the card between the front and back.down keyup key

H key: Show hint (3rd side).h key

A key: Read text to speech.a key

image

Play button

image

Play button

image

Progress

1/57

Click to flip

57 Cards in this Set

  • Front
  • Back
An important objective of the NAMP is to achieve and maintain maximum material
readiness. Which of the following statements reflects additional objectives of the NAMP?

1. Conservation of time
2. Safety and conservation of material
3. Conservation of manpower only
4. Safety and conservation of manpower
Safety and conservation of material
What is the purpose of the Aircraft Maintenance Department within an organization?

1. Perform scheduled maintenance on
assigned aircraft
2. Perform unscheduled maintenance on
assigned aircraft
3. Repair reported discrepancies on
squadron aircraft
4. Maintain assigned aircraft in a
Full-Mission-Capable state in support
of the units mission
Maintain assigned aircraft in a
Full-Mission-Capable state in support
of the units mission
What are the major types of aircraft maintenance?

1. Organizational, intermediate, and
depot
2. Standard and special
3. Rework and upkeep
4. Scheduled and unscheduled
Rework and upkeep
Restorative work performed on an item of support equipment is considered what
type(s) of work?

1. Upkeep
2. Rework
3. Preventative
4. Special
Upkeep
A comprehensive depot-level inspection of selected aircraft structures and materials and correction of any critical defects is
what type of maintenance?

1. Upkeep
2. Special rework
3. Standard rework
4. Standard upkeep
Standard rework
Maintenance performed on aircraft or equipment to improve its specific function
is known as what type of maintenance?

1. Standard rework maintenance
2. Special rework maintenance
3. Organizational maintenance
4. Intermediate maintenance
Special rework maintenance
Preventive, restorative, or additive work performed on aircraft, equipment, and
support equipment by an operating unit is
what type of maintenance?

1. Upkeep
2. Rework
3. SDLM
4. Depot
Upkeep
Scheduled work is performed on an aircraft as a result of its completing a prescribed number of flying hours. What type of
maintenance is this?

1. Special upkeep
2. Special rework
3. Standard upkeep
4. Standard rework
Standard upkeep
The ability of an aircraft to perform its mission was changed by alteration without
regard to flying hours. What type of maintenance is this?

1. Special upkeep
2. Special rework
3. Standard upkeep
4. Standard rework
Special upkeep
Aircraft maintenance is divided into what total number of maintenance levels?

1. Five
2. Two
3. Three
4. Four
Three
Centralized local maintenance is performed
by which of the following activities?

1. Depot-level activities
2. Contractor plants
3. AIMDs
4. CMAs
AIMDs
Work performed by an operating unit on a
day-to-day basis in support of its own operations is known as what type of
maintenance?

1. Intermediate-level maintenance
2. Organizational-level maintenance
3. Special maintenance
4. Depot-level maintenance
Organizational-level maintenance
Servicing aircraft and preflight inspections
are actions that are performed at what level
of maintenance?

1. Depot
2. Special
3. Intermediate
4. Organizational
Organizational
Work performed in a centrally located
facility within a geographical area is known
as what type of maintenance?

1. Special maintenance
2. Depot-level maintenance
3. Intermediate-level maintenance
4. Organizational-level maintenance
Intermediate-level
Work performed at an industrial-type facility is known as what type of
maintenance?

1. O-Level
2. I-Level
3. SDLM
3. None of these
SDLM
The Naval Aviation Maintenance Program
is sponsored and directed by what command?

1. NAVSUP
2. CNET
3. CNO
4. DCNO
CNO
Material and technical support for the
NAMP are provided by the cognizant systems command and which of the following commands?

1. NAVSUP
2. CNET
3. CNO
4. DCNO
NAVSUP
What type of relationship exists between a superior and a subordinate?

1. Special
2. Staff
3. Management
4. Line
Line
According to directives from higher authority, what officer directs the aircraft
maintenance department?

1. The assistant aircraft maintenance
officer
2. The aircraft maintenance officer
3. The quality assurance officer
4. The aircraft maintenance division
officer
The aircraft maintenance officer
The functional management responsibilities for the planning, control, and production of the aircraft maintenance department rest
with which of the following officers?

1. Assistant aircraft maintenance officer
2. Aircraft division officer
3. Aircraft maintenance officer
4. Quality assurance officer
Aircraft maintenance officer
Which of the following officers ensures that
staff divisions at the organizational level
conform to established policies?

1. The assistant aircraft maintenance
officer
2. The staff division officer
3. The aircraft maintenance officer
4. The maintenance material control
The assistant aircraft maintenance
officer
Assuring that high quality maintenance work is performed is a function of what division in an organizational-level
maintenance department?

1. Operations
2. Quality assurance
3. Administration
4. Material control
Quality assurance
Which of the following maintenance concepts allows you to regulate events
rather than be regulated by them?

1. Detection
2. Prevention
3. Suppression
4. Correction
prevention
Within an o-level maintenance activity, what part of the activity monitors, controls, and applies the MDS?

1. Admin
2. System administrator/analysis
3. Material control
4. Production control
system administrator/analysis
What officer is directly responsible for the
overall production effort and material support of the organizational-level
maintenance department?

1. The administration officer
2. The aircraft maintenance officer
3. The maintenance material control officer
The maintenance material control officer
What branch or division is known as the nerve center of an organizational-level
maintenance department?
1. Material control
2. Maintenance control
3. Aircraft
4. Quality assurance
Maintenance control
The power plants, airframes, and aviator’s life support equipment branches belong to
what division of an organizational-level
maintenance department?

1. Aircraft
2. Line
3. Avionics/armament
4. Staff
Aircraft
If you work in electronics, instruments, or
armament, you are normally assigned to what division of an organizational-level
maintenance department?

1. Aircraft
2. Line
3. Avionics/armament
4. Operations
Avionics/armament
In an intermediate-level maintenance activity, what is the central point of the
maintenance effort?

1. Maintenance material control
2. Maintenance control
3. Quality assurance
4. Production control
Production control
Normally, the intermediate maintenance organization has a total of how many
production divisions?

1. Five
2. Six
3. Three
4. Four
Six
What system provides organizational and
intermediate maintenance activities with a
computer-based management information
system?

1. NADEP
2. NALCOMIS
3. MDS
4. NAVSUP
NALCOMIS
Maintenance managers need current status information to control the maintenance
effort. What system is designed to provide
maintenance managers with this information?

1. NMCS
2. PMCS
3. VIDS
4. FMCS
VIDS
The VIDS boards in each work center are verified with the maintenance control VIDS
board a minimum of how often?

1. Once each shift change
2. Twice each day
3. Once each day
4. Once each week
Once each day
After the personnel in maintenance control
complete the required blocks of a newly initiated VIDS/MAF, copies 1 and 5 are
forwarded to

1. quality assurance
2. material control
3. production control
4. the work center
the work center
If a check flight is required after the completion of a corrective action, notification must be given to what individual?

1. The quality assurance division officer
2. The material control supervisor
3. The maintenance material control officer
4. The aircraft maintenance officer
The quality assurance division officer
After a discrepancy has been corrected, what should be done with copies 1 and 5 of
the VIDS/MAF?

1. Copy 1 should be sent to quality assurance, and copy 5 is placed in the work center files
2. Copy 1 should be sent to maintenance control, and copy 5 is sent to quality
assurance
3. Copy 1 should be sent to maintenance control, and copy 5 is placed in the
work center files
4. Copy 1 should be placed in the work center tiles, and copy 5 is sent to maintenance control
Copy 1 should be sent to maintenance control, and copy 5 is placed in the
work center files
At the intermediate level of maintenance, what copies of the VIDS/MAF are forwarded to the work center upon
component induction for repair?
1. Copies 1, 2, and 3
2. Copies 2, 3, and 4
3. Copies 1, 4, and 5
4. Copies 1, 3, and 4
Copies 1, 4, and 5
A component goes into an AWP status at the intermediate level of maintenance.
What action is completed first with regard
to the component?
1. It is stored in the work center
2. It is properly packaged and preserved
3. It is stripped of any usable parts
4. It is returned to the AWP unit
It is properly packaged and preserved
Information entered on MDS forms must always meet which of the following requirements?

1. Be typed
2. Be entered in pencil
3. Be accurate and complete
4. Be entered in pen
Be accurate and complete
On-equipment maintenance actions are documented on

1. NALCOMIS or a VIDS/MAF
2. WORK REQUEST or NALCOMIS
3. DCF VIDS/MAF
4. VIDS board
NALCOMIS or a VIDS/MAF
The portion of an inspection that involves
the search for defects is known as what
phase?
1. Search
2. Fix
3. Repair
4. Look
Look
An organizational code, the Julian date, a sequence number, and a suffix are part of what code or control number?

1. Action Taken code
2. Job control number
3. Sequence control number
4. Work Unit Code
Job control number
Maintenance was performed on an item identified by a Work Unit Code. What type
of code describes this action?

1. Manufacturer’s
2. JCN
3. Malfunction
4. Action Taken
Action Taken
What type of code identifies a subassembly repair action that is completed separately
from the major component repair action?

1. JCN Suffix
2. Type Equipment
3. support
4. Malfunction
JCN Suffix
What type of code identifies the system, specific engine, or component/part on which work is being performed?

1. Transaction code
2. Malfunction Description code
3. Type Equipment code
4. Work Unit Code
Type Equipment code
What type of code describes the trouble or cause of trouble in a system or component?

1. Transaction code
2. Action Taken code
3. What type of code describes the trouble or
cause of trouble in a system or component?
1. Transaction code
2. Action Taken code
3. Malfunction code
4. Work Unit Code

4. Work Unit Code
Malfunction code
What code is often referred to as the manufacturer’s code?

1. JCN
2. CAGE
3. WUC
4. WCC
CAGE
An aircraft has 479 flight hours on it since new. You have just removed and replaced a damaged canopy. What entry should you
place in the Time/Cycles block on the
VIDS/MAF?

1. E0479
2. A4790
3. A0479
4. E4790
A0479
A Technical Directive Status code consists of how many characters?

1. One
2. Two
3. Three
4. Four
One
SE Custody and Maintenance History Record, OPNAV 4790/51, is used for
which of the following purposes?

1. To record custody and transfer information
2. To provide rework and overhaul data
3. To identify applicable and
incorporated technical directives
4 All of the above
All of the above
Of the following equipment, which one requires an OPNAV 4790/51 card?

1. PME equipment
2. Engine test cells and stands
3. GB1As
4. VAST stations
VAST stations
On initiation of each new OPNAV 4790/51, reporting custodians retain the latest
processed copy from the permanent custodian. A current copy is also
maintained with any accumulated data transcribed to it.

1. True
2. False
True
What document provides scheduled control
of the predictable maintenance workload?

1. SE Custody and Maintenance History
Record
2. VIDS/MAF
3. MDs report
4. Monthly Maintenance Plan
Monthly Maintenance Plan
At the organizational level, what officer sets the format and arrangement of the
monthly maintenance plan?

1. The maintenance material control officer
2. The quality assurance officer
3. The aircraft maintenance officer
4. The safety officer
The aircraft maintenance officer
At the organizational level, the MMP is distributed by what day of the month prior
to the month to which it applies?

1. 1st
2. 5th
3. 15th
4. 25th
25th
Which of the following information is
included in the MMP?

1. Current list of QARS
2. High-time components
3. Schedule of technical training
4. Each of the above
Each of the above
. To increase technical knowledge levels and
enhance and improve existing formal
training through diagnostic testing
procedures is the primary goal of which of
the following programs?

1. PQS
2. MTIP
3. FRAMP
4. NAESU
MTIP