Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
40 Cards in this Set
- Front
- Back
If an explosive mishap is caused by a person's
failure to follow authorized procedures, revocation of certification is mandatory, and |
a page 13 entry is
required. |
|
What command develops and approves
specifications for construction of Navy ships? |
NAVSEASYSCOM develops and approves
specifications for construction of Navy ships. |
|
A ship's primary magazines are usually
located _______________. |
A ship's primary magazines are usually
located below the waterline. |
|
What types of magazines are located close to
the area to be served? |
Ready-service magazines are located close to
the area to be served. |
|
What is the purpose of modular stowage?
|
The purpose of modular stowage is to give the
greatest versatility and to minimize ammunition handling. |
|
List the two areas that the IRRP created
improved handling. |
The two areas that the IRRP created improved
handling are rearming and weapons assembly. |
|
Generally, magazines aboard ship are
designated to hold _____________. |
Generally, magazines aboard ship are
designated to hold a single type of ammunition. |
|
Authority for stowing mixed types of
ammunition in a magazine rest with ________. |
Authority for stowing mixed types of
ammunition in a magazine rest with NAVSEASYSCOM. |
|
three alarms that are commonly
associated with all magazine sprinkler systems |
sprinkling (FH circuit) alarm, a flooding (FD circuit)
alarm, and a high-temperature (F circuit) alarm. |
|
The
F circuit detects |
a slow rise in temperature while the FH
circuit detects a rapid rise in temperature |
|
Q1. Missile magazines are vented to _________.
|
A1. Missile magazines are vented to the
atmosphere |
|
Q2. What item shouldn't be stowed in magazines
that are equipped with sprinklers? |
Mk 58 marine location markers shouldn't be
stowed in magazines that are equipped with sprinklers. |
|
Q3. In a shipboard magazine, what alarm circuit
indicates a rapid rise in temperature? |
In a shipboard magazine, the FH circuit
indicates a rapid rise in temperature. |
|
Q4. What types of pallets are used as magazine
stowage dunnage aboard ship? |
Mk 3 or Mk 12 metal pallets are used as
magazine stowage dunnage aboard ship |
|
Q5. NAVAIRSYSCOM should be notified if the
temperature in any magazine is consistently above ______. |
NAVSEASYSCOM should be notified if the
temperature in any magazine is consistently above 100ºF. |
|
Q6. What person controls all magazine keys
aboard ship? |
The ship's gunner controls all magazine keys
aboard ship. |
|
The IWHS lower-stage weapons
elevator (fig. 11-11) services magazines and ammunition handling areas from the 7th deck level up to and including |
the main deck (hangar deck).
|
|
What decks are serviced by lower-stage
elevators? |
Lower-stage elevators service the 2nd
through 7th decks. |
|
What device is used to bridge the gap in the
door opening between an elevator platform and the deck? |
A movable ramp is used to bridge the gap in
the door opening between an elevator platform and the deck. |
|
If an elevator suspension rope breaks, what
mechanism automatically operates to lock the platform to the guide rails? |
If an elevator suspension rope breaks, a
broken-rope safety device automatically operates to lock the platform to the guide rails. |
|
If an elevator over travels upward beyond the
maximum up-stage position, what device actuates, stopping the elevator and shutting off power to the hoisting winch? |
If an elevator over travels upward beyond the
maximum up-stage position, an over travel limit switch actuates, stopping the elevator and shutting off power to the hoisting winch |
|
Upper-stage elevators are used
__________________. |
Upper-stage elevators are used to transport
weapons between the 2nd and main decks |
|
What decks are serviced by IWHS lower-stage
elevators? |
IWHS lower-stage elevators service the 7th
through the main decks. |
|
The platform machinery for an IWHS
lower-stage elevator is located on the ____ deck. |
The platform machinery for an IWHS
lower-stage elevator is located on the 3rd deck. |
|
The only weapons elevators that provide
access to the flight deck are the ___________. |
The only weapons elevators that provide
access to the flight deck are the upper-stage, wire-rope elevators |
|
The primary responsibility for maintaining
weapons elevators belongs to the ____ rate |
The primary responsibility for maintaining
weapons elevators belongs to the AO rate. |
|
What electrical power is required to operate
the weapons elevators? |
The electrical power required to operate the
weapons elevators is 440-volt, three-phase, 60-Hz power. |
|
(CONREP)
|
Conventional replenishment
|
|
HERO)
|
HAZARDS OF ELECTROMAGNETIC
RADIATION TO ORDNANCE ( |
|
The weapons staging area on the flight deck,
located between the island and the starboard catwalks, is known as the ______. |
The weapons staging area on the flight deck
located between the island and the starboard catwalks is known as the bomb farm. |
|
Under what conditions is a pier-side weapons
movement of ammunition loaded onto an aircraft carrier? |
A pier-side weapons movement of
ammunition loaded onto an aircraft carrier is authorized in emergency situations when authorized by NAVSEASYSCOM or to conform to the ship's sailing schedule. |
|
List the methods used to transfer ammunition
at sea. |
Conventional replenishment (CONREP) and
vertical replenishment (VERTREP) are used to transfer ammunition at sea |
|
When VERTREP is being used to transfer
ammunition between ships, transfer is accomplished by ____________________. |
When VERTREP is being used to transfer
ammunition between ships, helicopters using slings or cargo nets accomplish transfer |
|
List the three HEROordnance classifications
|
The three HERO ordnance classifications are
HERO safe, HERO susceptible, and HERO unsafe. |
|
Ordnance is HERO safe if it meets what
criteria? |
HERO-safe ordnance must be percussion
initiated and shielded enough so that EDDs are safe when used in RF environments. |
|
Name the environment to which HEROsusceptible
and HERO-unsafe ordnance should not be exposed. |
HERO-susceptible and HERO-unsafe
ordnance should not be exposed to RF environments. |
|
What is the HERO EMCON bill?
|
The HERO EMCON Bill contains a degree of
relief from HERO RF restrictions. |
|
What information can you find in the local
HERO EMCON bill? |
The HERO EMCON Bill contains a list of all
HERO-susceptible and HERO-unsafe ordnance items on board the command. |
|
what is the most important factor in avoiding a
HERO-unsafe situation. |
The AO
|
|
Bomb-farm watch personnel
maintain direct communication with |
the aviation
ordnance control station (AOCS). |