Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
|
What must a mechanic furnish the owner or operator of an aircraft if the aircraft he is giving a 100 hour inspection prove to be unairworthy? |
A signed and dated list of the discrepancies that keep the aircraft from being airworthy |
|
|
Under what conditions can an aircraft be operated with a 100 hour inspection over due? |
No more than 10 hours after an inspection is due for the purpose of flying it to a place where the inspection can be performed |
|
|
Where can you find the recommended statement to use for recording the approval or disapproval of an aircraft for return to service after a 100 hour inspection? |
14 CFR Part 43 .11 |
|
|
Under what conditions can an aircraft that is due an annual inspection be operated? |
Only when a special flight permit is issued |
|
|
For how long can an aircraft be operated if a 100 hour inspection is overdue? |
10 hours and this must be subtracted from the time before the next inspection is due |
|
|
What certification is required for a mechanic to be able to approve an aircraft for return to service after a 100 hour inspection? |
A certificated mechanic with an Airframe and PowerPlant rating |
|
|
What determines whether or not an aircraft must be given a 100 hour inspection? |
Aircrafts that carry persons for hire and aircraft that are used for flight instruction must be given a 100 hour inspection |
|
|
What certification is required for a mechanic to conduct an annual inspection and approve the aircraft for return to service after the inspection? |
A certificated mechanic with an Airframe and Powerplant rating and an inspection authorization. |
|
|
What is the difference between an annual inspection and a 100 hour inspection? |
The certificated mechanic with an airframe and powerplant rating can only conduct a 100 hour inspection, while a certificated mechanic with an airframe and powerplant rating and inspection authorization is required to conduct an annual inspection. |
|
|
Does the FAA require that a checklist be used when conducting an annual or 100 hour inspection? |
Yes, see 14 CFR part 43.15 C1 |
|
|
What certification is required for a mechanic to conduct a progressive inspection? |
A certificated mechanic with an airframe and powerplant rating and an inspection authorization |
|
|
Where can you find the requirements for inspecting the altimeter and static system of aircrafts that are operated under instrument flight rules? |
14 CFR part 43 appendix E |
|
|
Where can you find the requirements for inspecting the ATC transponder that is installed in an aircraft? |
14 CFR part 43 appendix F |
