Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
19 Cards in this Set
- Front
- Back
- 3rd side (hint)
|
A technician is not able to boot to Windows OS. A "non-bootable device" file message appears on the screen on the computer restarts which of the following is the most possible cause of the error message? |
A bootable HDD is not recognize in the BIOS |
None |
|
|
A home user working outside and office reports that there laptop is no longer connecting to the Internet which of the following technician recommend to check first? |
Wireless on/off switch |
None |
|
|
Which of the following wireless standards provide the strongest encryption? |
WPA2 |
None |
|
|
A Technician has replaced a bad internal WLAN card and a Windows 7 professional laptop. the WLAN card is listed in device manager as enabled and working which of the following should be done Next to use the card? |
the SSID of the network must be added to the connection |
None |
|
|
Which of the following cable types has a maximum transfer speed greater than 1 GB per second? |
CAT6 |
|
|
|
Which of the following wireless protocols is limited to operate in the 5 GHz range ONLY? |
802.11a |
|
|
|
Which of the following would be an example of prohibited content? |
Third party proxy sites |
|
|
|
A technician needs to configure a computer with an external storage drive. which of the following in the faces would provide the fastest through put? |
eSATA |
|
|
|
A user, Ann, states that her laser printer has a smudge that repeats itself every couple inches down the center of each page. which of the following components most likely needs replacing? |
Toner drum |
|
|
|
A technician completing a server room build out encounters a bundle of un-terminated network cables that are not labeled. Which of the following tools would be the BEST to determine which devices the cables are run to ? |
Toner probe |
|
|
|
A technician to replaces a computers NIC with a wireless card. The user wants to save the NIC. Which of the following should the technician used to preserve the and NIC? |
Anti-Static bag |
|
|
|
Which of the following turning technologies uses piezoelectric pressure pads to produce small bubbles that are moved to the paper? |
Inkjet |
|
|
|
Which of the following should a technician do first after receiving a call from a customer asking for assistance? |
Confirm the user and the associated issue. |
|
|
|
Which of the following is enabled in the bios that will prompt the user, Joe, to enter his password every time the laptop performs a POST? |
Power on password |
|
|
|
ECC memory is primarily used in which of the following computers? |
Server |
|
|
|
When setting up for a projector presentation, which of the following laptop function keys usually needs to be toggled? |
Display |
|
|
|
Which of the following should a technician check first before upgrading the RAM in a laptop? |
The motherboard specifications |
|
|
|
Which of the following is the appropriate interface to connect an optical mouse and keyboard to a computer? |
USB |
|
|
|
When a user's computer boots, a message shows that reads: "Alert! Cover previously removed." Which of the following was configured in the bios to cause this alert? |
Intrusion detection |
|
