• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/100

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

100 Cards in this Set

  • Front
  • Back
What is the primary method used to ensure the widest dissemination of maintenance cross-tell information to highlight trends or safety conditions?
DMS
An Intermediate Repair Enhancement Program (IREP) meeting is heald at least
quarterly
What off-equipment level of maintenance consists primarily of testing and repair or replacement of component parts?
Intermediate
What type of maintenance is a hybrid of three-level maintenance (3LM) and two-level maintenance (2LM) that combines intermediate level maintenance from multiple bases at one location?
Regional Repair Center
Regarding the Reliability and Maintainability Program, who is responsible for deveolping a proactive program to analyze collected data and act accordingly to implement solutions for those systems under their control?
Single Mangers
Who is responsible for co-charing Product Improvement Working Group meetings with the lead command executive agent?
Single Manager
What level of Operating Instructions (OI) is published when responsibilities apply to both the operations group and Maintenance Group (MXG)?
Wing
Who does the Office of Primary Responsibility (OPR) designate to meet daily responsibilities for administering an Operating Instruction (OI)?
Point of Contact (POC)
Which MXG organization acts as the OPR for maintenance policy guidance as it pertains to Operating Instructions (OIs)?
Quality Assurance
What type of support agreement is developed when two or more branches of the military are involved?
Inter-Service
What is a general rule you should follow while developing support agreements?
It should cover only one receiver
Once a formal aircraft modification proposal has been submitted, who-in addition to the single point manager and the lead command configuration review board - must approve it?
HQ/USAF/A4M
In addition to the MAJCOM system functional manager, who is consulted on disposition instructions for a serially controlled item that does not have readable serial numbers?
Air Logistics Center item mangers
Historical aircraft records are normally centrally located within the possessing unit. Who, if anyone, way authorize the files to be decentralized?
MXG/CC
Who may authorize special application uses for the AFTO IMT 95?
MXG/CC
Which Air Force Material Command (AFMC) agency is the primary user of engine inventory management data entered into the Comprehensive Engine Management System?
Oklahoma City Air Logistics Center
Which Maintenance Group (MXG) section is responsible for leading the Data Integrity Team?
Maintenance Data System Analysis
What is the common standard interval used for calculating the Fix Rate on non-fighter type aircraft?
12 hours
How is an aircraft flight malfunction classified if an identical malfunction occurred on the same aircraft four sorties ago?
Recur
What maintenance priority designator is assigned to the repair of Aerospace Ground Equipment (AGE) needed to support primary mission aircraft within six work hours of a scheduled launch?
2
What maintenance priority designator is assigned to primary mission aircraft undergoing scheduled maintenance that if not accomplished would prevent or delay mission accomplishment?
3
What maintenance priority designator is assigned to non-primary mission aircraft undergoing extensive repair
5
Weekly maintenance scheduling meetings forecast and monitor maintenance requirments for the current month as well as how many months in the future?
2
In support of the weekly maintenance scheduling meeting, each aircraft maintenacne unit is required to provide a one-week forecast of all scheduled maintenance by 1600 on...
Friday
Who has sole responsibility and authority to develop and implement Minimum Essential System Listings (MESLs) for Research, Development, Test & Evaluation (RDT&E) missions and aircraft in support of RDT&E?
Air Force Materiel Command (AFMC)
What status is reported for an aircraft that has degraded system, subsystem, or component performance but is capable of full mission performance?
Fully Mission Capable (FMC)
What overall C-level is reported for a unit that possesses the required resources and is trained to undertake many, but not all portions of the wartime mission(s) for which it was organized or designed?
C-3
For a wing's Status Of Resources and Training System (SORTS) reporting, who monitors overall weapons load crew status and advises the Maintenance Group Commander (MXG/CC) when the number of fully certified crews falls below the minimum set limit?
Wing Weapons Manger
Who is responsible for the status of a unit's individual Unit Type Code (UTC) requirements as reported by the AEF-UTC Reporting Tool (ART)?
SQ/CC
When forecasting readiness for deployment in the AEF-UTC Reporting Tool (ART), an individual should consider how many months in the future?
6
The daily meeting to update the Wing Commander on maintenance issues is called?
Wing Standup
What are some of the wing commanders responsibilities?
-Managing the wing FOD program
-Establishing a CDDAR capability
-Publishing operating instructions with specific responsibilities for applicalbe wing agencies
What are some of the Maintenance Group Commanders responsibilities?
-Ensuring manpower is equitably distributed
-Ensuring strict adherence to technical data and management directives
-Approving work schedules only when compatible with local environmental conditions
Who is charged with overseeing the management of maintenance facilities and aircraft support equipment procurement and maintenance?
MXG superintendent
What are some of the Maintenance Group (MXG) superintendent's responsibilities?
-Act as liaison between staff and production supervisors
-Resolve conflicting maintenance requirements between units
-Ensure maintenance training prorams meet the intent of HHQ instructions
The Maintenance Group (MXG) superintendent is responsible for coordinating with unit leadership in rotating personnel between duty positions in order to...
develop individual experience and knowledge
If applicable, who is responsible for managing the squadron's flying crew chief porgram?
Squadron Commander (SQ/CC)
What are some of the Squadron Commanders (SQ/CC) responsibilities?
-Monitoring and reporting on mission capabilities
-Reviewing mobility, contingency, and exercise plans
-Being legally accountable for squadron EPA compliance
It is important for a Squadron Commander (SQ/CC) to review the squadron's Designed Operational Capability (DOC) statement to...
Determine if current squadron processes are adequate to meet all tasked requirements
What two positions make up what is known as maintenance operations-formerly known as maintenance supervision?
Operations officer/maintenance superintendent
Working together, the maintenance operations team is tasked with...
providing lower level administration for nearly all programs the SQ/CC is responsible for
Who is the Aircraft Maintenance Unit Officer In Charge (AMU/OIC) responsible for the leadership, supervision, and training of assigned personnel?
Squadron operations officer
What are some of the responsibiliteis of a AMU/OIC/superintendent?
-Reviewing pilot reported discrepancies daily
- Closely monitoring the flow of aircraft into major scheduled inspections
-Ensuring suffcient numbers of aircraft engine run personnel are available
Who is normally responsible for chairing the AMU's daily maintenance production meetings?
AMU/OIC
The main person responsible for monitoring, tracking, and documenting safety and health information about assigned workers is the
section NCOIC
What are some responsibiliteis of a section NCOIC?
-Enforcing strict adherence to technical data
-Monitoring the qualification and training of assigned personnel
-Acting as the first-line manager and supervisor of maintenance production
What are some of the AMU production superintendent's (Pro-super) responsibilities?
-Signing exceptional releases which clear aircraft to fly
-Directing the maintenance effort using available resources
-Maintaining a current copy fo the on-base disaster map with a cordon overlay
Who must the AMU production superintendent inform and coordinate with about the unit's maintenance effort, including providing aircraft status updates as required?
Maintenance Operations Center (MOC)
What individual is in the best position to ensure that maintainers accomplish maintenance IAW technical data and higher level directives?
Expediter
In manging, controlling, and directing resources to accomplish scheduled/unscheduled maintenance to generate aircraft, expediters work for the
production superintendent (pro-super)
What are some of the flightline expediter's responsibility?
-Ensuring ordered parts are picked-up quickly
-Maintaining copies of emergency action and functional checklists
-Ensuring aircraft and equipment forms documentation is accurate and complete
What are some of the sections that are part of the Maintenance Operations Flight (MOF)?
-Engine Mangement
-Maintenance Operations Center
-Maintenance Data System Analysis
What section is responsible for managing the Location subsytem of the IMDS-CDB for aircraft under its control?
Maintenance Operations Center (MOC)
What are some classes taught by the maintenance group's Maintenance Training Flight?
-Engine Run
-Borescope Operation
-Engine Blade Blending
Unit Training Managers (UTMs) are administratively assigned to the...
Maintenance Training Flight
The programs and Resources Flight is responsible for managing and controlling what IMDS-CBD subsytem for the maintenance group?
Maintenance Personnel
The Status of Resources and Training Systems (SORTS) data gathered and approved each month by the maintenance group is....
forwarded, and to be combined with other wing data
What does the Programs and Resources Flight maintain for the maintenance group?
Support agreements
Who is responsible for managing the Maintenance Standardization and Evaluation Program (MSEP) for the maintenance group?
Quality Assurance (QA)
When a case of aircraft chaffing is reported, what percentage of assigned like model aircraft must be inspected to determine if other aircraft are also experiencing the problem?
10 percent
Aircraft Maintenance Units (AMU's) must provide inputs to the maintenance group through the operations officer for the development of an annual maintenance plan to...
ensure maintenance capabilities are not exceeded and commitments can be met
In an Aircraft Maintenance Unit (AMU), who is primarily responsible for using fault reporting manuals to identify fault codes to aid maintainers in aircraft troubleshooting?
Debrief Personnel
What Landing Status Code (LSC) is recorded for an aircraft that experienced a ground abort?
Code 0
What are some of the positions assigned to the AMU Aircraft section?
-Flying crew chief
-Dedicated crew chief
-Assistant dedicated crew chief
Who must approve a waiver to allow maintenance personnel in non-crew chief AFSCs to be appointed as a Designated Crew Chief (DCC)?
Group Commander
What type of specialist is tasked to troubleshoot and repair aircraft interphone systems?
Avionics
Which of the following specialists is sometimes assigned to the speicalist section of an AMU?
Electronics Warfare
In squadron-sized fighter aircraft units, the AMU's Weapons section Maintenance element is sometimes combined with...
Armament flight in the Maintenance Squadron
Load crew chiefs are normally 2W1X1 AFSC NCOs with what skill level?
5 Skill level
On a weekly basis the AMU's PS&D section is required to provide a listing of scheduled maintenance job control numbers to
the Maintenance Operations Flight PS&D
The AMUs PS&D section reports directly to...
AMU supervision
The package that contains aircraft and maintenance historical documents is called the
aircraft jacket file
The AMU support section is usually responsible for...
-vehilces
-test equipment
-technical orders
Why is it important for support sections to standerdize procedures across the Aircraft Maintenance Squadron?
Secrurity, control, and accountability reason
What are some of the functions of the Accesssories Flight Fuel Systems section?
- Repairing fule tanks
-Inspecting hydrazine systems
-Functionally checking fuel systems
Who must the AGE flight commander/chief notify when mission essential AGE levels fall below a predetermined limit?
Maintenance Operations Center (MOC)
What section is responsible for performing minor maintenance on AGE and preparing AGE for deployment?
Servicing, Pickup, and Delivery
Who do AGE schedulers work for and report to on a daily basis?
Production Support section NCOIC
If a Cast is formed, what section normally assigns personnel to support the CAST?
Armament Support
What section is tasked with performing user calibration and maintenance on TMDE for the Armament flight?
Armament Support
A 2LM Avionics section is normally allowed to perform what type of repairs?
-Bench-check serviceability screening
-SRU cross-cannibalizations
-TCTOs performed at wing level
What avionics flight section is responsible for performing off-equipment maintenance on pressure altimeters, engine test cell instrumentation, INS, and navigation computers?
Guidance and Control Systems
If required, which Fabrication flight section is responsible for manufacturing and inspecting thermal radiation barriers and soundproofing materials?
Survival Equipment
Which section is part of the Maintenance Squadron's Maintenance flight?
Wheel and Tire
What Maintenance Flight section is often tasked with rigging and replacing landing gears and performing work that is beyond the capability of other activities?
Repair and Reclamation
If Munitions is not established as a Maintenance Squadron flight, it can be established as a...
separate squadron in the Maintenance Group
What section is responsible for assembling, disassembling, delivering, inspecting, and maintaining assigned MMHE for the Munitions flight?
Munitions Production
What section is responsible for providing broad control and support for all Munitions flight activities by planning, scheduling, coordinating, controlling, and directing their activities?
Munitions Systems
What Propulsion flight section processes supply requests, manages bench stock, and operates tool storage areas?
Support
What section is responsible for proper tracking and completion of TCTOs for the Propulsion flight?
Jet, Turbo-shaft Engine Intermediate Maintenance
What section is responsible for repairing, storing, and maintaining fuel nozzles, fuel mainfolds, oil pumps, afterburners, thrust reversers, and other engine components for the propulsion flight?
Module/Accessory Repair
What section is reponsible for performing in-labratory and on-site calibration and repair for the TMDE flight?
PMEL
What TMDE flight section contains the Customer Service element?
Production Control
For technical order related duties, the TMDE TODO/TODA person or section is responsible to the...
TMDE flight commander/chief
Where is the Ogden Air Logistics Center located?
Hill AFB
What agency provides management support for LANTIRN pods and system?
Warner Robins Air Logistics Center
Where is the AF Flight Test Center located?
Edwards AFB
The AF Flight Test center has played a major role in the test and development of every major weapon system in the AF inventory for how many years?
60
What are some unit components of the Air Armament Center?
-46th Test Wing
-96th Air Base Wing
-377th Air Base Wing
Where is the Aerospace Maintenance and Regeneration Center located?
Davis-Monthan AFB