Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
5 Cards in this Set
- Front
- Back
After static routes are configured it is important to verify that
|
they are present in the routing table and that routing is working as expected
|
|
The command show running-config is used to view the active configuration in RAM to
|
verify that the static route was entered correctly
|
|
the show ip route command is used to make sure that the
|
static route is present in the routing table
|
|
Step 1 to verify static route configuration:
|
Enter the show running-config command in privileged mode to view the active configuration.
|
|
Step 2 to verify static route configuration:
|
Verify that the static route has been correctly entered. If the route is not correct, it will be necessary to go back into global configuration mode to remove the incorrect static route and enter the correct one
|