Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
6 Cards in this Set
- Front
- Back
Step 1 to configure static routes.
|
Determine all desired prefixes, masks, and addresses
|
|
Step 2 to configure a static route is
|
Enter global configuration mode
|
|
Step 3 to configure a static route is
|
type the ip route command with a prefix and mask followed by the corresponding address from Step 1. The administrative distance is optional.
|
|
Step 4 to configure a static route is
|
Repeat Step 3 for all the destination networks that were defined in Step 1
|
|
Step 5 to configure a static route is
|
Exit global configuration mode.
|
|
Step 6 to configure a static route is
|
Use the copy running-config startup-config command to save the active configuration to NVRAM
|