Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
state the purpose of the T700-ge-401C engine components:
cold section module |
compressor compresses air sends to combustion section
|
|
hot section module
|
combines fuel & air mixture
|
|
power turbine module
|
2 stage - gas generator
power turbine |
|
accessory section module
|
houses starter, fuel pump, & chip detector
|
|
engine control quadrant
|
inside cockpit pilot selects
|
|
engine output shaft
|
connects to main txmsn section
|
|
state the purpose of the APU:
|
internal power to start engines, ecs, and provides emergency power
|
|
turbomach
|
75hp
easy access dipstick |
|
garret
|
90hp
|
|
state the purpose of the tail drive shaft
|
transmits power to the tail rotor
|
|
state the purpose of the following transmission system components:
main module |
tranmits power to the rotor head
|
|
input module
|
changes angle, reduces rpm, houses accessory module
|
|
accessory module
|
reduces rpm from input module, houses generator & hyd pump
|
|
intermediate gearbox
|
reduces rpm, changes angle
|
|
tail gearbox
|
reduces rpm, changes direction to drive tail rotor
|
|
state the purpose of the following fuel cell components:
main fuel cells |
2 cells
590 gallons 4,012 lbs JP-5 |
|
aux fuel tank
|
120 gallons
816 lbs jp-5 |
|
HIFR system
|
ship to a/c re-fueling
wiggins & nato hc |
|
state the safety precautions that must be observed when the following are operating:
engines |
intake suction
exhuast heat |
|
apu
|
same
|