• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/30

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

30 Cards in this Set

  • Front
  • Back
Thermal flow rate is SI is usually measured in:
Cal/sec
How much work is done while an electric motor drives a pump through 40 revolutions, given the motor delivers 150 N*m of torque?
37680 joules
when gases are compressed, storage tanks should be located as close to the point of use as possible because:
the flow rate is directly proportional to the distance traveled
the rate of movement of electrical charge is measured in:
Coulombs
a quantity that is fully specified by measuring its size is called a:
Scalar
which of the following is associated with linear rate?
buckshot fired from a gun
which of the following instruments does not measure fluid pressure?
multimeter
which of the following indicates how well a material conducts heat energy?
thermal conductivity
rolling friction is a type of:
kinetic friction
the English unit for drag resistance is:
N/(m/sec)
in the english system of units, why is torque expressed in lb*ft and work in ft*lb
it is the way the units fall as the problem is solved
the prime mover in an angular mechanical system is called torque which is determined by multiplying the force applied, by the lever arm. the lever arm is equal to the:
radius of the circle in which the force is applied
the length of the radius of a circle measured on the circumference is one:
radian
work done by a torque is equal to the torque applied times the:
angle moved through
fluid-flow rate units such as "kg per min" or "gm per sec" are units of:
mass-flow
an electric motor that is connected to an overhead crane lifts stacks of reinforcement rods. each stack of rods weighs 3000 newtons. how much work is done by the motor if it lifts 5 stacks of rods 50 meters?
750,000 joules
the force like quantity in the equation for electrical work is:
Voltage
temperature depends on the presence or absence of:
heat
heat energy moves from:
warmer regions to cooler regions
the substance with the LEAST energy of molecular motion would be:
dry ice(-196 deg. C)
which of the following does NOT refer or pertain to batteries?
secondary cells
the most common source of DC voltage is:
a battery
a term that pertains to DC voltage is:
anode
voltage difference is measured with a/an:
oscilloscope
tension, compression, bending, and twisting are kinds of mechanical:
stress
a resultant force has both magnitude and:
direction
torque is a measure of what kind of force?
rotational
negative acceleration is also referred to as:
a deceleration
a vector must have:
magnitude and direction
the general unifying equation for expressing rate is:
Rate = Displacement-like Quantity / Elapsed Time