• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/12

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

12 Cards in this Set

  • Front
  • Back
Define the term HM
any material w/ chemical characteristics may pose hazard to human health or environment
Define the term HW
any material discarded which meets HM definition or is deamed hazardous by the EPA
Discuss HM storage and inspection requirements
inspected weekly and quarterly. tightness of closure, corrosion, leakage, improper labling, and expired shelf life
State the purpose and information contained on the Material Safety Date Sheet
describes the materials, health and safety hazards, and precautions for safe handling and use
What are the six categories of HM
flamables, aerosols, toxic material, corrossive material, oxidizing materials, compressed gases
Explain the general procedures to be followed when a HM/HW spill is discovered
only trained personnel respond to HM spills. discovery, notification, initiation of action, evaluation, containment, damage control, dispersion of gases, clean-up and decontamination, disposal, certification for re-entry, follow-up reports
State the personal protection equipment required when handling HM/HW
eye protection, repitory devices, gloves
Discuss the disposal limitations for the following:
adhesives, grease, hydraulic fluid, fuels, waste oils, paint/paint thinners
for all disposal limitations refer to OPNAVINST 5100.19C
Describe required training for all hands with repect to the HM/HW program
types of HM in the work area, how to dispose, how to read labels, MSDS, protective measures, emergency procedures
Describe required training for all hands with repect to the HM/HW program
types of HM in the work area, how to dispose, how to read labels, MSDS, protective measures, emergency procedures
Describe the purpose of secondary labeling of HM when removed from the original container
use only approved containers, make sure labeling is retained and transfered
Discuss the purpose of the HM Authorized Use List (AUL)
inventory of HM and who can use what