Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
15 Cards in this Set
- Front
- Back
|
Article 250 |
Grounding and Bonding |
|
|
Article 100 |
Definitions |
|
|
Article 240 |
Overcurrent Protection |
|
|
Article 225 |
Outside Branch Circuits and Feeders |
|
|
Article 220 |
Branch-Circuit, Feeder, and Service Load Calculations |
|
|
Table 220.55 |
Demand Factors and Loads for Household Electric Ranges...etc... |
|
|
Article 358 |
Electrical Metallic Tubing (EMT) |
|
|
Table 250.102(C)(1) |
Sizing Grounded Conductor, Main Bonding Jumper, System Bonding Jumper, and Supply-Side Bonding Jumper for AC Systems |
|
|
Article 352 |
Rigid Polyvinyl Chloride Conduit: type (PVC) |
|
|
Volume Allowance Required per Conductor Table? |
Table 314.16(B) |
|
|
Box Fill For a #12 awg wire |
2.25 in.^3 |
|
|
Table 250.66 |
Grounding Electrode Conductor for AC Systems |
|
|
Each plate electrode shall expose not less than _____ subsurface to exterior soil. |
2 ft ^2 |
|
|
10 ft Tap Rule |
240.21(B)(1) |
|
|
25 ft Tap Rule |
240.21(B)(2) |
