Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
11 Cards in this Set
- Front
- Back
|
The procedure for loading SC frequencies requires setting the proper switches, pressing the correct number keys for the frequency you wish to load, and storing the load in RT permanent memory by pressing STO button.
|
LOADING SC FREQUENCIES.
|
|
|
- Obtain authorized operating frequency from SOI or NCS?
|
1st Step
|
|
|
- Refer to the illustration of RT front panel above: then set FCTN to LD?
|
2nd Step
|
|
|
- Set MODE to SC?
|
3rd Step
|
|
|
- Set CHAN to MAN, CUE, or desired channel (1 - 6) where frequency is to be stored?
|
4th Step
|
|
|
- Press FREQ (display will show "00000", or to frequency RT is currently tuned)?
|
5th Step
|
|
|
- Press CLR (display will show five lines)?
|
6th Step
|
|
|
- Enter the numbers of the new frequency (using keyboard buttons).
If you make a mistake while entering a frequency, press CLR (this action will delete the last digit entered)..It is important that you enter another number, or store the frequency within 7 seconds. Otherwise, the display will go blank, and you will have to re-enter the numbers. If you require more than 7 seconds to perform a step, continue to press the last button, and the 7 second clock will be stopped? |
7th Step
|
|
|
- Press STO (display will blink and show the frequency you just stored)?
|
8th Step
|
|
|
- Repeat steps a thru h for additional frequencies that you wish to load?
|
9th Step
|
|
|
- Set FCTN to SQ ON (or normal operating position)?
|
10th Step
|
