Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
11 Cards in this Set
- Front
- Back
- 3rd side (hint)
Define the purpose of the naval aviation safety program
|
preserve human and material resources
|
|
|
Explain the safety responsibilites of the following personnel: CO, Aviation safety officer, ground safety officer, DH, Div O, Safety Petty officer, All Hands
|
CO - ensure all persons instructed & drilled in all safety precautions & procedures ASO - advisor to CO on all aviation safety matters Ground - advisor to CO on all ground safety matters DH-coordinates dep't safety program with units ASO Div O-ensure personnel are familiar with all command safety info Safety PO - AW1 Grant ensure personnel are fam with safety in their w/c, All Hands - fam w/ all safety applicable to them and their duties
|
|
|
Explain the functions of the Safety Council / Enlisted Safety Committee
|
Headed up by the XO. Formed to set goals, manage assets, and review safety related recommendations
|
|
|
Discuss how the following contribute to aviation mishaps: Human error, maintenance and support factors, admin and supervisory factors, material failures or malfunctions, environmental factors
|
Human error - it is part of nearly every mishap, Maintenance and support factors - improper maintenance, Admin and sup factors-improper level of sup or failure of qualified personnel, Material - faulty design, Environmental - Extreme exposure to heat,cold
|
|
|
Define the following mishap classes: Class A, Class B, Class C, Class D
|
Class A = damage $1million +, results in death or total disability. Class B = > than $200K, but < $1mil, partial disability or 3+ hospitalized. Class C = > $10k but < $200k, loss of time beyond a day. Class D = <$10k, no lost time, non-fatal
|
|
|
State the objective of the Aviation Gas-Free engineering program.
|
ensure a safe environment is maintained when working on fuel systems
|
|
|
Explain the hazards associated with Radio Frequency (RF) energy
|
It can generate electrical currents or voltage large enough to threaten life
|
|
|
State the purpose of the laser safety hazard control program
|
to design a series of safety factors when using lasers
|
|
|
explain the purpose a safety stand down
|
to devote time to safety training and awareness
|
|
|
Discuss the concept of ORM
|
a systematic decision making process used to identify & manage hazards
|
|
|
Explain the following as they apply to ORM
|
Identifying-list major steps
Assessing-determine risk probability and severity Making risk decisions-start w/ most serious first Implementing contorls-administer Supervising-conduct evalautions |
IAMIS
|