Sodium chloride

Physical properties of PHB: PHB physical properties similar to polypropylene. However, PHB is perfectly isotactic and does not include any chain branching like, for instance, PE. During processing, it flows easily. It is insoluble in water and soluble in chloroform and other chlorinated hydrocarbons. It exhibits good barrier properties against oxygen and compared to other biopolymers. It possesses better physical properties than polypropylene for food packaging applications. (Chaijamrus & Udpuay…

Plant Material Collection Fully grown whole plants of Tribulus terrestris Linn. were collected from different localities of Chennai, Tamilnadu. The fruits were separated out from the plants and washed in running tap water to remove adhering dirt and soil particles and dried first under shade in room temperature and secondly in a hot-air oven for complete drying at 50-60˚C. The dried fruits were made into coarse powder by grinding and stored in labelled bottles for further study and…

This experiments goal was to successfully produce ZnI2 by using Zinc Sulfate (Heptahydrate) and Barium Iodide Dehydrate, which Jessica and I did with acceptable success. The definition of acceptable success for this experiment is measured by how close our percent yield was close to the ranges provided (0-2% being considered excellent precision and etc). Our percent yield was 92 % meaning that it was an acceptable, but not exactly as close to what we wanted it to be. In order to try and figure…

Introduction Brine shrimp are creatures that are known to thrive in harsher conditions, so they make an ideal research subject because of their durability. They are a native species of the Great Salt Lake, proving that they can withstand a high water salinity of up to 20 %+ ( https://microbewiki.kenyon.edu/index.php/Salt_Lake). Brine shrimp range from around 8-10 mm, including the tail. They have nineteen body segments, 11 of them include twenty-two legs total. Brine shrimp have an exoskeleton…

2.1 Polydimethylsiloxane (PDMS) Polydimethylsiloxane (PDMS) own to a group of polymeric organosilicon compounds that are commonly stated as silicones. PDMS is optically clear, and, in general, non-flammable, non-toxic, and inert. PDMS is viscoelastic, meaning that at long flow times (or high temperatures), it acts like a viscous liquid such as honey. However, at short flow times (or low temperatures), it acts like an elastic solid such as rubber. In other words, PDMS will flow to cover the…

Smoked Sea Bass Fish Ingredients required: 1. Sea bass – 4-5 lbs, skin-on fillets 2. Water – 1 quarter 3. Salt – 1 cup 4. White granulated sugar – 1 cup 5. Paprika – as per taste Instructions to follow: 1. Dissolve salt and sugar in the brine over a low heat. 2. Let the mixture set to cool. 3. Take Sea Bass, remove fillets and rinse under running water properly. 4. After rinsing, let the fish rest in brine and kept in fridge for at least 6-10 hours. 5. Preheat the smoker and add the wood…

II: 1-10 and 110, respectively are presented3-4. Cellulose I is the most prevalent form in the nature and it occurs in two allomorphs Iα and Iβ. Cellulose II is the crystalline form that emerges after re-crystallization or mercerization with aqueous sodium hydroxide, and it is thermodynamically the most stable form. In cellulose I the chain orientation is exclusively parallel, whereas in cellulose II the chains are arranged in an antiparallel orientation.1, 5. Since polymorphism is present in…

Haines et al., A neutron diffraction study of quartz-type FePO4: high-temperature behavior and αβ phase transition Kristallogr. 218, 193-200 (2003) Paragraph 1 Crystal chemical relationship between quartz (SiO2) and FePO4 Silicon dioxide is an oxide of silicon with the chemical formula of SiO2. SiO2 is a chemical compound most commonly found in Quartz and it has a space group of P3121. The lattice symmetry of SiO2 is tetrahedron, where there are 4 oxygen atoms covalently bonded to the silicon…

Determining the Chemical Formula of a Hydrate PROCEDURE Experiment required: copper (II) sulfate hydrate, 2 crucibles, electronic mass balance, bunsen burner, iron ring, crucible tong, clay triangle, wire gauze, retort stand, 1. Individuals should wear goggles on and tied hair back before the experiment started. 2. The mass of an empty crucible cover was measured. 3. Approximately 2.00g of copper (II) sulfate hydrate samples was taken out and put into the crucible. 4. The mass of the crucible…

Compare and contrast the crystal structures and crystal chemistry of quartz, α-FePO4 and β-FePO4. FePO4 is also known as Iron (III) phosphate. Iron (III) phosphate is an inorganic compound. Most of the FeP04 has the structure of α-quartz which is α-FePO4. It has a tetrahedral molecular geometry. α-FePO4 is present at pretty low degree Celsius. It is also a transition metal as it is in the d-block in the periodic table. It can be studied at many different temperature which range from 294K to…