NIMOTOP INJECTION Nimodipine 0.02% solution contains the following excipients: Ethanol 96%, Macrogol 400, sodium citrate, citric acid, Water for Injections Ph. Eur. These excipients consist of properties that aim towards the proper functionality of Nimotop. They consist of inherent stabilities that cause little or no effect in the stability of the drug and they do not have any acute or chronic toxicity. The excipients are also added into the Nimodipine 0.02% solution to enhance the biological…
.1 Material Composition The raw material mentioned above has to be taken into an appropriate ratio to compound the batch sample. Generally, to test the property change in the polymer by the influence of a filler/additive is done by processing several batches with different but gradual loading of the filler/additive. Here, we have to test the properties of nano Calcium Carbonate in the polymer matrix of polypropylene. For this, 12 batches are prepared by using the different size of filler by…
DISCUSSION There are three chemical properties will be discussed which are combustion, reaction with bromine and reaction with potassium permanganate. Combustion was used to test the unsaturation of hydrocarbon. The degree of unsaturation refers to the number of the rings and / or multiple bonds present in the hydrocarbon molecule (McMurry, 2015). Hexane was a saturated hydrocarbon, it completely combusted and emitted carbon dioxide plus water. Cyclohexene was an unsaturated hydrocarbon, it…
The first step is to put on your goggles and apron. Then you need to gather your materials. You then need to make observation of the hydrate. Observe the color, state, texture, etc. to smell the unknown substance you need to waft the substance by slowly moving the smell of the liquid to your nose. Step 2- For the lab my group changed the way we were doing the experiment for time. This is the first way that we did it for trails one to two. First you need to get a beaker and mass it on a scale…
The researchers compared both biologically produced manganese oxides and chemically produced manganese oxides for the oxidation of diclofenac. Because biologically produced manganese oxides are known to have high specific surface areas and high catalytic reactivity, this substance offers higher rates of oxidation for diclofenac when compared to chemically produced manganese oxides.² If biologically produced manganese oxides prove to completely eliminate diclofenac from the water supply, the…
#27 Erick Roque The Exploding Lunch Bag Introduction “POP!” A balloon just blew up. But no, it was a plastic bag. But no one was there. So who blew it up? It turns out that it blew up by a mixture of vinegar, baking soda, and… WATER!!! What do you think, can you pop a bag with that mixture? Purpose The reason why I chose this experiment is because I have seen the reaction when both vinegar and baking soda go together… an explosion of vinegar. And if vinegar and baking soda can…
CAUTION: It is best not to get dichloromethane on your skin. Gloves are to be worn during this experiment, if improper safety precautions are taken there is a possibility of irritation, and or burning of the skin. CAUTION: Gas will build up in the separatory funnel while you are shaking it, so you must vent the funnel occasionally to prevent the stopper from popping out, causing a mess and possibly getting dichloromethane on your skin. ~During the pre-phase of this experiment it is…
polarity of the said compound, although the conjugate acid of benzocaine formed as a result. Due to the change in polarity, the state of benzocaine shifted from being solubilized in diethyl ether to water. Through vacuum filtration, water was removed. Sodium hydroxide was added to the separated water in order to produce…
Truc-Nhi Do Separation of a Mixture The purpose of this lab was to separate a mixture, calculate the percent composition by mass, and find percent error. I first started out by taking the mass of each component of the lab. I used the infiltration method to allow the salt and water solution, a blended mixture, to pass through the filtration paper and into the beaker. A trick to know if something is a solution is to see is it has the aqueous sign (aq) in the formula, like NaCl(aq). This step…
Different batch experiments were conducted to access the effect of pH on removal of heavy metals by T1B1 strain. 100 ml of sterilized SE medium was inoculated into 250 ml Erlenmeyer flask containing 100 µl (107cells/ml) of bacterial suspension with HM (mg L-1): Fe (150), Mn (100), Ni (50), Cd (30), Cu (30) and Zn (50) with pH adjusted to 4, 6.5 and 9. Another set of experiments were set up by inoculating SE medium containing HMs (mg L-1 ): Cr+6 (100, 150, 200), Fe (100, 150, 200), Ni (50, 100,…