Powder coating

Decent Essays
Improved Essays
Superior Essays
Great Essays
Brilliant Essays
    Page 3 of 10 - About 92 Essays
  • Improved Essays

    of carrier (Q) and coating material (q). Lf = W/Q q = Q/R Experimental design of Glyburide Liquisolid compacts:[13] The optimization of Glyburide liquisolid compacts was carried out by taking into consideration the conc. of drug in Transcutol HP and amount of carrier: coating material ratio as…

    • 1308 Words
    • 6 Pages
    Improved Essays
  • Improved Essays

    1.2.2. Physical Properties Methyl ethyl ketone is a clear, colourless fluid that is less viscous than water and has a somewhat acute odor that smells most of the ketones and is described by some as being similar to Boerscot. Compared with acetone it is less volatile and less soluble in water (about 27.5g / 100mL at room temperature). It is a solvent used for extracting gums and oils from plants and cleaning the remnants of metal and glass, so why often a cleaner or ingredient is found 1.2.3.…

    • 840 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    the trials, the tablet pills were the first to dissolve out of all of the types of pills, averaging a time of 2 minutes and 2 seconds. This is due to the fact that tablets have no type of coating over them, so there is less for the acid to break down. It looked a little swelled before it broke apart into powder like pieces. The second fastest pill was the coated tablet and had a mean time of 4 minutes and 22 seconds. The acid has to break through the casing before it can get to the tablet…

    • 630 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    the decorative paints segment with a modest market share of 13%. Nearly 75% of the Indian paints industry consists of the decorative segment. SWOT Analysis of the company Strengths: 1. It is one of the largest coating companies in India and market leader in automotive and powder coating. 2. It being a subsidiary of Kansai Paint Company Limited, the technological edge of Kansai helps the company innovate in order to satisfy consumer’s needs in a better way. 3. R&D, Innovation, Quality and…

    • 1049 Words
    • 5 Pages
    Improved Essays
  • Great Essays

    Congo Red Lab Report

    • 1045 Words
    • 5 Pages

    Chemicals Congo red (CR) an anionic dye (C32H22N6Na2O6S2 and Molar Mass as 696.7 gmol-1) used in the present work (Fig.1a) and zinc acetate dihydrate were purchased from LOBA Chemie Company, India. Methylene blue (MB) a cationic dye (C16H18N3SCl and Molar Mass of 319.85 gmol-1) as shown in Fig.1b, was purchased from Oxford laboratory reagent Co. Zinc acetate used for the preparation of nanoparticles ZnO and sodium hydroxide were purchased from Biotech laboratory chemicals company. Ethyl alcohol…

    • 1045 Words
    • 5 Pages
    Great Essays
  • Decent Essays

    Silver Research Paper

    • 355 Words
    • 2 Pages

    microbes. Silver-copper ions can even replace corrosive chlorine to sanitize pools and tanks. The antimicrobial properties of silver that make it useful to medicine and water purification are also applied in food and hygiene, meaning that silver coatings are applied to food packages and refrigerators. Many new consumer products, such as washing machines, clothing, and personal hygiene products have the benefits of antibacterial silver. Silver is also the best thermal and electrical conductor…

    • 355 Words
    • 2 Pages
    Decent Essays
  • Improved Essays

    A Triumphant Moment There I was a junior in high school starting my second semester of school taking a welding class. At first we had to do a couple of lessons out of a book and pass the tests before we could start welding. Once we finished the tests we started to weld on scrap metal for practice. Then the teacher would look at the welds and make sure we were improving. When we were done with welding and scrap metal and showed we were proficient at it she said it was time for us to pick a…

    • 971 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    The Differences and Similarities of Powder Versus Oil Based Feathers Did you know there are actually two groups of feathers? The field of ornithology is not one often studied among non-bird lovers; if one were to state the aforementioned fact, that there is not only one group of feathers in existence, many would reply in shock. However, it is indeed true; the two different groups of feathers are the powder-based feathers and the oil-based feathers, which both have their similarities and…

    • 953 Words
    • 4 Pages
    Improved Essays
  • Superior Essays

    The SLS process uses powder materials to produce 3D solid parts from CAD file. After the CAD data is uploaded to machine computer in the Stereo lithography file format, the process of sintering starts. From figure 1, it can be observed that SLS system contains three chambers. There are two chambers that is used to store powder and central chamber, where parts of the product is built. The right and left chambers are also called…

    • 964 Words
    • 4 Pages
    Superior Essays
  • Improved Essays

    aeroplanes and therefore reducing fuel consumption. Strength: By modifying the composition of the alloys, aluminium strength can be changed for whatever application it is required for. Corrosion-resistance: Aluminium generates a protective oxide coating naturally, and therefore makes it particularly useful for protection and conservation. Conductivity: Based on weight, aluminium is an even better conductor than copper, making it ideal to be used in overhead power lines. Ductility: aluminium has…

    • 1657 Words
    • 7 Pages
    Improved Essays
  • Page 1 2 3 4 5 6 7 8 9 10