Photographic chemicals

Decent Essays
Improved Essays
Superior Essays
Great Essays
Brilliant Essays
    Page 44 of 50 - About 500 Essays
  • Superior Essays

    Waste Toner Case Study

    • 1688 Words
    • 7 Pages

    of HBT. The CBNP is well adhered to the surface of HBT. This property increases the surface contact of HBT with paper and blackening effect in photocopies. 9. EDAX Analysis Energy Dispersive X-ray Analysis is widely used technique to analyse the chemical composition of a material under SEM. X-ray data is processed to obtain the percentage of each measured element in the individual particles. Table. 2. Hybrid Black Toner – Case 1 Element Apprx. Conc. Intensity Corrn. Weight % Weight% Sigma…

    • 1688 Words
    • 7 Pages
    Superior Essays
  • Improved Essays

    Despite that silicon, iron and phosphate are distinct chemical elements, quartz and iron phosphate demonstrate very similar crystal structure, and this could be achieved through altervalent substitution based on the following equation: 2Si4+ → Fe3+ + P5+ As such, every two silicon ions in quartz is replaced…

    • 1502 Words
    • 7 Pages
    Improved Essays
  • Superior Essays

    The CGS framework retreats to a proposition in 1832 by the German mathematician Carl Friedrich Gauss to base an arrangement of supreme units on the three essential units of length, mass and time. Gauss picked the units of millimeter, milligram and second The centimetre–gram–second arrangement of units (truncated CGS or cgs) is a variation of the metric framework taking into account the centimeter as the unit of length, the gram as the unit of mass, and the second as the unit of time. All CGS…

    • 1495 Words
    • 6 Pages
    Superior Essays
  • Great Essays

    Abstract. The theoretical treatment of the equilibrium structure of the derivatives was based on the DFT method using the functional B3LYP with the base 6-311 ++ G (d, p). To distinguish the molecular electrostatic potential surface (MESP), we used the principle of HSAB (Hard Soft Acid and Base), in order to have the centers of activity of a molecule and the effects of substitution on the systems of pyrazolooxazine. These have anti-inflammatory activities. In our work, we have applied methods of…

    • 1617 Words
    • 7 Pages
    Great Essays
  • Improved Essays

    Kinetic investigation and the Arrhenius plot The degradation of SAC in acidic, basic and oxidative mediums at different HCl (0.01, 0.05 and 0.1 M, keeping temperature 90 ºC), NaOH (0.005, 0.01 and 0.05 M, keeping temperature 40 ºC) and H2O2 (5%, 10% and 15%, keeping temperature 90 ºC) strengths was studied. Also SAC degradation was studied as a function of temperature in acidic (30, 60, 70, 90ºC and room temperature, keeping HCl strength 0.1M), basic (40, 65, 90ºC and room temperature, keeping…

    • 1669 Words
    • 7 Pages
    Improved Essays
  • Improved Essays

    3.1.3. TGA analysis Thermal gravimetric analyses (TGA) were recorded under N2 atmosphere over the temperature range of 25- 800 oC at a heating rate of 15 oC/min, to evaluate both the composition and the thermal stability of f-silica and AgNPs/f-silica. As shown in Fig. 1D the mass loss noticed between 25 oC and 180 oC represents the physically adsorbed water. Adsorbed water accounted 7.4%, 6.43% and 2.2% for f-silica, AgNPs/f-silica sample using [Ag+] = 0.005 M, and AgNPs/f-silica sample using…

    • 1062 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    Soda Ash Lab Report

    • 910 Words
    • 4 Pages

    The reaction of soda ash (Na2CO3) with calcium sulfate in water is represented by the following chemical reaction: Na2CO3 + CaSO4 >>> CaCO3 + Na2SO4. Assuming that this reaction is complete and that there is 153 mg/l of CaSO4 initially present, what is the mass of soda ash that must be added to 1 liter of the water? How many grams of CaO are required to be the chemical equivalent of 246 g of Mg(HCO3)2? A complete reaction requires the number of CaSO4 to be equal to the number of moles…

    • 910 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Figure (2.6) shows industrial oxygen sensor. Fig. (2.6) Oxygen sensor [25] This thesis used some kinds of sensors described below: a. pH Sensor “The term pH is derived from a combination of “p” for the word power and “H” for the symbol of the element Hydrogen. Together the meaning is the power of hydrogen. pH used to compare the relative acidity or alkalinity of a solution at a given temperature. A pH of (7.00) describes a neutral solution because the activities of hydrogen and hydroxide…

    • 1017 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    Crystalline and Amorphous Solids  Solids can be divided into two classes: crystalline and amorphous. Crystalline solids have well-defined edges and faces, diffract x-rays, and tend to have sharp melting points. In contrast, amorphous solids have irregular or curved surfaces, do not give well-resolved x-ray diffraction patterns, and melt over a wide range of temperatures. Crystalline solids, or crystals, have distinctive internal structures…

    • 1015 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    Maggot Movement Research

    • 739 Words
    • 3 Pages

    The Effect Of Temperature On The Rate Of Maggot Movement. Environmental Systems and Societies ---Planning Lab--- Gaurav Iyer Research Question To what extent does the temperature affect the movement of Maggots? Introduction The Experiment aims to analyze the behaviour of the maggots. In this case, behaviour is defined as the way organisms respond to their environment. In the experiment, the orientation of the movement of organisms and gametes in response…

    • 739 Words
    • 3 Pages
    Improved Essays
  • Page 1 41 42 43 44 45 46 47 48 50