Magnesium hydroxide

Batch adsorption experiments Adsorption of the Pb2+ ions by the Fe3O4@GMA-AAm nanocomposite was measured from batch adsorption experiments by mixing 10 mg of adsorbent with an aqueous solution containing a predetermined concentration of Pb2+ ions (50 mL). The mixture was shaken at 200 rpm to reach equilibrium. After a specified time, the solid and liquid were separated by external magnet and the concentrations of Pb2+ ions were measured by AAS. To find the optimized pH in adsorption of Pb2+ ions…

Sterile Saline (0.9% w/v NaCl) Dissolve 9.0gm of NaCl in 1000ml water and dispense 9.0ml of the solution into 20ml test tubes. Autoclave the tubes as per the validated cycle and cool to room temperature. Sterile saline with polysorbate 80: Dissolve 9.0gm of NaCl in 1000ml water and add .5gm of tween 80 to the resulting saline solution, dispense 9.0 ml of the solution into a number of 20ml test tubes. Autoclave the tubes Preparation of Inoculums and its Standardization: 1) Take loop full of…

Proximate analysis The analysis result of proximate composition of dried laver (P. species) has presented in Table 1. In our study, the crude protein of commercial dried laver was found to be (42.99 ± 0.051g/100g DW) and the moisture content was (9.40 ± 0.056 g/100g DW). The ash content was found (10.30 ± 0.033 g/100g DW). Laver, in this study, contained a very small amount of crude lipids (0.49 ± 0.04 g/100g DW). The total dietary fibre of dried laver was (31.63 ±0.032 g/100g DW). The total and…

Sodium alginate (SA) is a natural anionic polysaccharide obtained from sea weeds. It contains β-D-mannuronate (M) and α-L-glucuronate (G) residues linked by (1-4)- glycosidic linkages (Fig. 7.1) and arranged in homopolymeric blocks of each type and in heteropolymeric blocks [1]. It is a water soluble polysaccharide and has pKa values of 3.38 for the ‘M’ and 3.65 for ‘G’ units [2]. It can form complexes with positively charged polymers due to its anionic character. It is utilized as emulsifier,…

The purpose of this experiment was to learn techniques to determine the freezing point of a pure benzophenone, a solvent. Furthermore, methods for determining the freezing point depression in relation to the solute, cyclohexanone, concentration were employed in addition to learning what molality is and how it related to the colligative properties being studied. These objectives were achieved by melting both pure benzophenone and benzophenone/cyclohexanone solutions (two solutions with…

• A candy maker named, Hans Riegel started the Haribo candy company in 1920. In 1922, he created the dancing bear candy made of gum arabic. The dancing bear candy was larger than the modern gummy bear. Modern gummy bears come in five colors. They are red, clear, orange, green, and yellow. Modern gummy bears contain sugar, glucose syrup, starch, food coloring, citric acid, and gelatin. • Solutions are mixtures that are mixed evenly throughout and can not be separated. The solute is the…

The purpose of this experiment was to determine the presence of the analgesic compounds acetaminophen, aspirin, caffeine, and salicylamide in the over-the-counter medications Anacin, Bufferin, Excedrin, and Tylenol. Thin-layer chromatography (TLC) was used to analyze solutions of the medications; the TLC plates were visualized using ultraviolet light and iodine staining.The ten micropipets used to spot the TLC plates were made from glass capillary tubes by heating the middle of each tube in a…

Gravimetric Analysis of a Metal Carbonate Purpose The purpose of this lab is to find the mass of an unknown metal by conducting a double-displacement precipitation reaction, which is our gravimetric analysis. Once we find the precipitate mass, we can then find the molar mass by using the molar ratio given in the reaction equation. Procedure First, we set up the ring stand with a Bunsen burner, put a crucible on top of the pipe stem triangle and heated the crucible for a minute, then let it…

In this unit of my 9th grade Physical Science, we are learning and experiencing with labs. In this week's experiment, my class did the paper towel lab. Here, we tested the quality of three different paper towel brands, Viva, Up&Up, and Bounty. Each lab group was testing for a certain quality of each brand, such as strength and absorbency. Through different experiments, each lab group came to the conclusion that one paper towel brand had more strength or better absorbency than the other two. My…

The Relationship Between Reactants and Products Objective: The objective of this experiment is to get a better understanding of limiting reactants and chemical reactions as whole. It also helped us determine how the amounts of sodium carbonate and calcium chloride affect the chemical reaction made: calcium carbonate. Introduction: This lab was to show the relationship between reactants and products. In this case, we used calcium chloride and sodium carbonate. This made a chemical reaction…