Lathe

Through the works of Guran Ilyas has this world been forever changed. It is no surprise, however, that even from the darkest night, hope would spring eternal. < ruined text describing the events leading up to the origination of Sanctuary> The Seven came together with one shared goal: a direct infiltration of the primal realm to rend its energies into an empty vessel. Upon their first step within the plane of primals, there began a small and yet subtle sinister change in each and every…

The most expensive saxophone in the world today is valued at almost 150,000 dollars, and it owes its existence to a man who invented the saxophone 170 years ago. Adolphe Sax, the sax itself, and the sax through history are all important in understanding this unique instrument. The evolution of musical instruments is quite a long process involving tons of different instrument makers, each building on the advancements of the last ones. The story of the saxophone differs from the usual pattern of…

The grooves are cut into the disc using a recording machine called a lathe. The engineer places the disc onto the late platter and positions a microscope and the cutter to the edge of the disc. Once ready to record he begins the audio and the lathe begins cutting the grooves. Lathes use either a ruby or sapphire cutting head. At the end of the recording the disc is inspected and if approved an etching containing a serial number…

territory]” (par. 7). As she describes these workspaces, she uses parallel formats for each one, as if she were indicating how similar the two really are. She starts out by explaining how her father’s shop “was a messy disaster area, a labyrinth of lathes.” Then, later, she describes how her domain, the music room, “was also a messy disaster area, an obstacle course of musical instruments.” She continues to describe both of the rooms in a distinct and purposeful manner. For her dad, “[t]he…

For example when describing their different, yet similar, territories within the house, Vowell uses language, that is usually used to describe a war zone. In paragraph seven she states, “Dad’s shop was a messy disaster area, a labyrinth of lathes.”, then she continues to describe her own section of the house as, “My domain was the cramped, cold space known as the music room. It was also a messy disaster…

Experimental Study on Heating Turning of Bearing Ring Xu Lanying1 Wu Qiang1 Wu Fangzheng2 Qin Mengyang1 (1 College of electromechanical engineering, GuangDongPolytechnic Normal University, Guangzhou 510635, China 2Department of Computer Science and Technology, Central South University, Changsha,410083.China) Abstract: For the bearing ring is easy to appear fatigue failure, the heating turning method is proposed for outer circle of the bearing to achieve better surface quality to improve…

Economic Transformation While researching texts written about manufacturing in the 1800s, I found several authors who published literature about how one man contributed to the transformation in economics. These authors express the importance in his work and how modern manufacturing has expanded, due to his innovation. Modern manufactory and the economic transformation can greatly be credited to Eli Terry. During the Revolutionary War, “Connecticut was the epicenter of clock-making in the United…

quality than the original tape recorders. To make a LP recording, engineers must first produce a master record, a disc with a polished aluminum disc core coated with a lacquer veneer. The master record is placed on the recording machine called a lathe. As musicians play live, a sapphire tipped cutter etches the sound into the surface of the disc. With the advancements in technology today, a digital recording of music can be transcribed by a machine onto the master record without the need of…

OHSA Standards for Electric Panel Labeling Electrical Paneling and the OHSA labeling requirements for them. In every workplace there is at least 1 type of electrical panel. Most of people think of a circuit breaker when they hear electrical panel, however there are many different purposes for an electric panel. I will briefly discuss what an electrical panel is and the labeling and safety requirements required by OHSA regarding them. What is an electrical panel? An electrical panel, also known…

People think “oh she does not want to ruin her pedicure, she will not do the dirty work.” The women in engineering do have to get their hands dirty and they do not mind. Natalie Ventura would say that when she was in robotics and when she worked on the lathe she would get her hands dirty from the metal, coolant, and shavings. Getting the job done requires to get a little dirty. Usually in the robotics team, the mentor would have a male be in charge more than a female. Our mentor would talk more…