Jeff Bridges

Although the story line is different and new characters are involved, the similarities between Tron and Tron: Legacy are undeniable. The original Tron was released in 1982 and is about a computer hacker Kevin Flynn who was formally an employee of ENCOM. Kevin now runs an arcade and is trying to prove that the five video games he created were stolen by ENCOM’s now senior executive Ed Dillinger. While trying to find evidence Kevin is sucked into ENCOM’s computer where the Master Control is the dictator in the digital world. Inside Kevin teams up with Tron (a security computer program written by Alan Bradley) and Yori (a program written by Lora Baines and Tron’s lover) to destroy the master control program and prove that Ed Dillinger stole the games. Tron: Legacy continues on from the story. During this film Sam Flynn (Kevin Flynn’s son) loses his dad early in life to “The Grid”. Sam responds to a message received from his lost father and is sucked into the grid. Sam is put to the test with various games and is nearly killed by Clu (A program Kevin created to make the perfect world), but Quorra (Kevin’s apprentice) saved Sam and brought him back to Kevin’s place. From there, Sam finds out that Clu has become a dictator and Kevin has been stuck in the grid and that Clu has to be defeated. After having a little background we can focus on the main similarities that occur such as the Hero’s Journey analysis. The call to adventure in both films include both Kevin Flynn and Alan…

First, it contributes to a greater sense of realism in the viewer. Sound originating from a source within the world of the scene does not indicate does as certainly as music from a non-diegetic source. Secondly, it can indicate information to the viewer. As the source of the music comes from within the universe of the characters, the music’s presence can be related to things within that universe, very relevantly to the characters themselves. In the same way that knowledge of someone’s musical…

equipment and bases. They needed to train up all different engineer jobs and get the equipment from all the engineer reserve unit. With all the different MOS’s there were two engineer jobs that were an asset Bridge and Land Clearance Engineers. There were many different missions for both types of engineers. There were miles and miles of new and old bridges that need to be constructed or repaired. Land Clearance teams had thousands of acres of dense jungles that needed to be cleared. With all the…

TASK 4(P4):- Discuss the effect of loading structural material 1) You need to discuss the effect of compressive force, tensile force, shear force, bending force on structural member 1) Timber: Compressive force on timber: - The effect of a compressive force on a timber is a change in structure of a material and to carry a load within its limits. Tensile force on timber: - The tensile force is the pulling force exerted on both the ends of a timber. Both the ends of a timber will undergo…

Bending Strength requirement This is the first body requirement and its task is to support all the vehicle subsystems. The body in static is going to suffer bending due to the weight of the components, passengers, fuel and cargo, Figure 42. Similar to a beam simple supported, the very first requirement is that the structure bend sufficient to absorb the energy due to the weight, but has to withstand the weight under different loading scenarios. Figure 42: Body loading under a static scenario…

On 1st August, 2007, an eight-lane, three-span section of the I-35W bridge over the Mississippi River in Minneapolis, Minnesota, suddenly collapsed. 145 people were injured, and thirteen died. This case study is based on an investigation of material evidence provided by the NASA Safety Center(NSC), National Aeronautics and Space administration (NASA), National Transportation Safety Board (NTSB), and a full-scale load rating of the bridge superstructure. Proximate (Direct) Cause: Gusset plates…

Bridges are used around the world to get over a bay of water. There are several different designs that could be used when building bridges such as arc, beam , cable-stayed, truss and suspension bridges. The Golden Gate Bridge is a very well known example of a suspension bridge. It is located in San Francisco, California. Construction began in 1933, in the midst of the Great Depression, and the bridge gave steady jobs to many people during this hard time. It was finished and opened in 1937,…

project? The existing bridge was built in 1956. It is a reinforced concrete/steel girder bi-directional three-span bridge and is approximately 32 ft wide and 205 ft long, with span lengths of 60-89-60 ft to each bent. The existing bridge roadbed width is 26 ft and provides 11 ft lanes and 2 ft shoulders, with baluster rails. It has a long history of issues associated with earth movement; stability issues were documented as early as 1965. A landslide recently occurred on the north side of…

transformation that will likely have significant impacts on traffic in Norman. The construction project includes the widening of Interstate 35 and reconstruction of the interchanges at West Lindsey Street and Highway 9 East. The West Lindsey Street Interchange is designed like the recently completed bridge at Main Street. This kind of interchange is designed to move large volumes of traffic. The project represents the largest single contract in the Oklahoma Department of Transportation’s…

The Ink Bridge by Neil Grant is a compelling novel written in third person about two boys from two different worlds on a journey of silence, Omed was de-tongued by the Taliban for his defiance while Hec experienced a traumatic family event that lead him to silence, fate played its part and the two boys met and were forever connected. We learn just how important it is to build bridges to the world rather than building walls around ourselves, and the significance that friendship and communication…