Gas chromatography

Isolation of Chlorophyll and Beta-Carotene from Plant Leaves Yokoyama Yuri B1 (A0142349E) 1. Aim: a) To separate beta-carotene and chlorophyll via column chromatography. b) To analyse the contents of the plant extract as well as the separated beta-carotene and chlorophyll via thin layer chromatography (TLC) c) To analyse the absorption peaks of both beta-carotene and chlorophyll using UV-Vis spectroscopy 2. Results: Fig 1. UV-Vis spectroscopy results for S2 (Beta-Carotene extract) Wavelength at…

Isolation of Component Via Extraction Objective: Separation of organic acid from a neutral compound using liquid/liquid extraction. Experimental: Similar to the “Thin Layer Chromatography” experiment, a TLC plate was ran with 2 ml of EtOAc and 8 mL of hexane in the jar. The Rf value was calculated using the formula located in the data for all the TLC plate. The mixed compound that was dotted on the TLC plate had 0.300 g of the impure benzoic acid and 10 mL of dichloromethane. A 50 mL flask…

used. Both techniques use Gas Chromatography, which is separating mixtures based on their distribution between a stationary liquid phase and moving gas phase (Saferstein, 2011). The Headspace Technique was developed in the 1980’s to aid in explaining the odor compounds found in the air surrounding objects such as plants, flowers and food (Headspace technology - Wikipedia, the free encyclopedia, n.d.) Headspace analysis is the investigation of the components present in the gas, which is found…

Methods Column chromatography was set up using a 60 ml syringe clamped to a ring stand. The syringe was plugged using a small amount of cotton. An Erlenmeyer flask was placed underneath the column to collect any excess material. Eleven 20 ml vials were labeled numbers 1 through 11. Silica gel was measured to 42 ml using a graduated cylinder and then moved into a 150 ml beaker. A slurry was created by adding 50 ml of hexane to the beaker containing the silica gel. The slurry was stirred for…

2.4 Optical density Yang, Gao & Jiang (2012) investigated Study on the Relationships between the Optical Density and Ink Film Thickness Based on the Offset Overprint Trapping. D=D∞ (1-e-ml) formula represents the relationship between ink thickness and ink density. By using the formal of one-color ink thickness and ink density, the second density that corresponds the first major density is transferred to the equal thickness. Then they are added together. The experiment was carried out using 128…

Through both simple and fractional distillation an equimolar solution of ethyl acetate and propyl acetate was seperated. After distilling 20 mL of the mixture the samples were collected in fractions, which were then analyzed using gas chromatography. The mole ratios of the distillations were converted to a percentage to analyze percent composition. Simple distillation yielded the following results: S1- 69.88% EA/ 30.12% PA, S2- 66.73% EA/ 33.27% PA, and S3- 46.42% EA, 53.58% PA. Fractional…

Introduction Thin-layer chromatography, otherwise referred to as TLC, is a fast and inexpensive way to determine the amount of components in a solution or to identify an unknown compound. The principal behind TLC is when different compounds are placed on silica gel or alumina, (stationary phases) they will travel different distances when eluted with the proper solvent. According to ChemistryGuide, this is because the more polar compound has a stronger interaction with the silica gel due to its…

TLC and HPTLC Introductions Thin layer chromatography (TLC) is derived from liquid chromatography where liquid serves as mobile phase and thin layer of substance on a flat late surface serves as stationary phase. The thin layer of materials act as sorbent while the mobile phase known as solvent. Solvent will send the solutes through the sorbent depends on the strength of the mobile phase as it dissolved the solute and send them up the plate against gravity ,and resistance of sorbent…

Utilizing column chromatography and recrystallization, separation and purification of the two products was obtained. The mass of 4-NBB, the para product, was 1.57 grams, while the mass of 2-NBB, the ortho product, was 0.80 grams. The para product was expected to have the higher yield, since it is more stable and consequently harder to break down throughout the experiment. Keywords Nitration, Bromobenzene, Substitution, 4-nitrobromobenzene, 2-nitrobromobenzene, Column Chromatography, Infrared…

Abstract In this paper CuO-NH-NH2 nanoparticle was synthesized and used to remove anionic dyes from single and binary systems. The scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), Energy-dispersive X-ray spectroscopy (EDAX) and X-ray diffraction (XRD) were used to characterize the nanoparticle. Direct Red 80 (DR80) and Direct Green 6 (DG6) were used as anionic dyes. The effect of adsorbent dosage, dye concentration and pH on dye removal was evaluated. Kinetic…