Final Solution

Constraints are an important to the self-organization of human movements. There are three main categories of constraints. The categories are, individual, task, and environment. Together these three categories help us understand how coordinated movements are performed. Environmental constraints are physical variables that occur in nature. For curling this can be the amount of ambient light that the venue has. Environmental constraints can also be social, instead of physical. An example would be…

I’m contacting you about the concentrations of the two copper (II) sulfate solutions that you were unable to correctly identify. The good news is that, for both samples, we were able to accurately determine their concentrations using Beer’s Law, a well-established law that governs the relationship between a solution’s concentration and the amount of wavelength the solution can absorb under standard conditions. Before going any further, though, let me fill you in on some of procedures and…

Emulsions are two-phase systems, a mixture of two or more liquids that are normally immiscible. There are two phases in the system, in which one is the continuous phase and the other one is the dispersed phase. Types of emulsions [38] Oil in water (o/w): in which oil is the dispersed phase and water is the continuous phase. Water in oil (w/o): in which water is the dispersed phase and oil is the continuous phase. Emulsions have a cloudy or opaque appearance because particles scatter light…

uction The point of this experiment is to examine the result of altering the concentration of sucrose on the rate of osmosis in cylinders of potatoes. This would occur by using like sizes and lengths of potato cylinders and applying them into varying concentrations of sucrose (1%, 5%, 10%, 15%, and 30%) in test tubes then assessing the change in mass of the potato cylinders after. Sustaining all variables unaffected such as the pH, same size, and a constant temperature. Hypothesis: I predict if…

Osmosis Research Question What will happen to the length and mass of the potato when it is put in water and different concentrations of salt? Introduction Osmosis is the diffusion of water molecules from a region of higher concentration to a lower concentration of water molecules (through a partially permeable membrane). If the cell is placed in a higher water potential, water enters by osmosis and if the cell is placed in lower water potential, then the water leaves the cell by osmosis. The…

As stated in the introduction the hypothesis for this experiment was that the solution beginning with the higher concentration of KMnO4 and placed in water with the warmer temperature will diffuse through the artificial membrane quicker than the solutions beginning with the already diluted solutions and placed in water at a cooler temperature. This occurring because all of the solutions are trying to diffuse to where it is less concentrated because they are eager to diffuse down its…

synthesized in a liquid solution containing some stabilizing organic molecules, broadly termed as surfactants, which are bulky and insulating ligands. The individual NCs in the thin film are indeed separated by these ligands, which significantly inhibit the charge transport. One of the simple yet effective ways to enhance the electrical performance of NC TFTs is the ligand exchange approach,2,3 replacing the…

Then remove the soaked tubing from the water and tightly twist one end several times and either tie with a string of tie a knot in the tubing, fill the model cell with a salt solution of distilled water. We were then instructed to twist the open end of the dialysis tubing and tie it tight, dry the bag and place it into any type of solution.We collected our data by using materials such as a small scale to measure the mass of the…

The simple integral desorption model was used to represent the physical phenomena of the extraction process.20 The extraction vessel is loaded with leaf particles with an initial andrographolide concentration of S0 (g/g leaf particles) to form a packed bed system. Fresh supercritical solvent is fed in to the bed, the pore and void volumes () are initially free of solute, and the process is isothermal. The total mass balance in the supercritical fluid phase of this system can be described by the…

diffusion of solutes and the osmosis of water through a semipermeable membrane, which was dialysis tubing. This experiment was done to examine, if the solution is hypertonic, hypotonic or isotonic. The result of this experiment was that tube 5 and 6 decreased in mass. Tube 2, 3 and 4 increased in mass. This is because in the hypertonic solution, water in the tube was flowing outwards, because the concentration of dissolved solutes was greater outside the tube than inside it. This…