Energy-dispersive X-ray spectroscopy

scans, X-rays, and MRIs? The discovery and research of radioactive isotopes and radiation had a major impact on the creation of more elements and the grand advances in the science and medical fields. Of these advancements some of the most prominent uses of these technological advancements is the use of CAT scans, X-rays and MRI. Which are all used to get a better look at the insides of the human body, and to further diagnose serious problems, and reduce recovery times on surgeries. The X-ray…

The experiment investigates a GM tube and a GM counter and the relationships of radiation. The experiment uses a GM tube to detect radiation coming from a source. This is done by the decay particle ionizing and causing the charge to build up in the tube, which is discharged and the discharge is counted by the counter and added to a display. The GM tube must be calibrated at the best voltage so that the count rate is independent of the voltage. A test was done to find this value by changing the…

The CT scanner Depends upon several steps:- 1-The x-ray tube and detector transverse (scan) the object. 2-The radiation beam passes through the object and is attenuated. The intensity of radiation beam from x- ray tube and transmitted beam both are detected by suitable detectors. 3-The transmitted beam and the references beam are both converted into electric signals. 4-These output current signals are then converted into digital form by analog –to-digital converter. 5-The digital data are…

Lab 4: Crystal Structure and X-Ray Diffraction of Materials Introduction The purpose of this experiment is to study the relationship between the geometry of a sample and its diffraction patterns through an exploration of reciprocal space. In this experiment, both a single crystal piece of Si with a (004) reflection plane and a Si powder sample are scanned, as well as the peaks the locations of the diffraction peaks on the single crystal. The collected data is then analyzed to determine the…

An x- ray spectrometer is a type of instrument that is used to get analysis on rocks, minerals, and fluids in a non- destructive way (XRF, 2002). The way this device works is on a wavelength similar to an electron microbe (XRF, 2002). The only way this is possible is through the behavior and reaction of atoms when they come in contact with the radiation (XRF, 2002). The materials will then become excited from the short length radiation which will dislodge an electron (XRF, 2002). Energy will…

TITLE: QUALITATIVE PHASE IDENTIFICATION & CRYSTAL STRUSTURE ANALYSIS OF ISONICOTINAMIDE POLYMORPHS. INTRODUCTION The science of crystallography is important in stability studies and determination of solid state molecule or particles. Isonicotinamide (pyridine -4- carboxamide) is the amide form of isonicotinic acid which exists as different polymorphs. Isonicotinamide finds extensive use in the pharmaceutical industry because of its good anti-tubercular, anti-bacterial, anti-pyretic and…

Computed Tomography A CT scan is produced using plenty of x-ray images from lots of different angles using computerized axial tomography (cat). It produces cross-sectional images or slices of bones, tissues and the angio portion which is produced through a CTA (cat scan angio) allows professionals to view the blood vessels. It is a great medical tool, with interesting history and of course like everything else in the worldwide medicine, it has its pros and cons. A Computed Tomography scan is a…

The SEM produces a largely magnified image by using electrons instead of light to form an image. A beam of electrons is produced at the top of the microscope by an electron gun. It consists of an electron gun to produce high energy electron beam. A magnetic condensing lens is used to condense the electron beam and a scanning coil is arranged in-between magnetic condensing lens and the sample. The electron detector (Scintillator) is used to collect the secondary electrons and can be converted…

Abstract In this paper CuO-NH-NH2 nanoparticle was synthesized and used to remove anionic dyes from single and binary systems. The scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), Energy-dispersive X-ray spectroscopy (EDAX) and X-ray diffraction (XRD) were used to characterize the nanoparticle. Direct Red 80 (DR80) and Direct Green 6 (DG6) were used as anionic dyes. The effect of adsorbent dosage, dye concentration and pH on dye removal was evaluated. Kinetic…

All the powders were protected from light by wrapping the vials with an aluminium foil. After one month storage, the powder samples were evaluated for drug content, in vitro aerosolization, surface morphology and solid state characterization by X-ray diffraction studies following the above mentioned procedures. Statistical analysis All the data was processed and their mean ± standard deviation values were determined using the Microsoft® Excel spreadsheets. Statistical analysis of the data (mean…