Emulsion

Decent Essays
Improved Essays
Superior Essays
Great Essays
Brilliant Essays
    Page 2 of 16 - About 156 Essays
  • Decent Essays

    Mancules 1603 Case Study

    • 794 Words
    • 4 Pages

    NIF "Engineer Service VNIINP" have develop oil soluble demulsifier specifically designed for the destruction of oil-water emulsions with a deep oil dehydration and desalting on EDP. Table 22 shows typical test results of demulsifiers samples. Table 22 The results of comparative tests of several samples of emulsion breakers Demulsifier sample Consumption g/t Degree of emulsion destruction…

    • 794 Words
    • 4 Pages
    Decent Essays
  • Improved Essays

    Butadiene.[53] SBR is an aqueous dispersion of (25%) Styrene (CH2=CHC6H5) and (75%) Butadiene (CH2=CH-CH=CH2) copolymer as shown in Figure (2-1). The copolymerization of these two polymers may done by different ways. Mostly they copolymerized in an emulsion process, by dispersing a soap like surface acting agent where the materials are in water solution.[54] Figure (2-1) The chemical structure of SBR[55] 2.7.1 Properties of SBR Recently the using of SBR becomes widespread in the world…

    • 756 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    DNA sequencing (Sanger to NGS) Introduction: The DNA sequencing methods have quickly evaluated for the forty last years and their finding was joined by breakthroughs in the field of Molecular biology (1). The first efficient method to sequencing DNA was found by F.Sanger in 1977 (2). But the huge desire to sequencing genomes required faster methods and many improvements were made. Fluorescence, capillary electrophoresis and microarrays led to a new way for sequencing genes : the Next Generation…

    • 545 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    In this study, the changes in the rheological curves of polyvinyl chloride (PVC) plastisols with increasing storage time and the factors affecting the changes were studied,. The results show that with increasing storage time, all the "viscosity–temperature" and "viscosity–time" rheological curves of PVC plastisols exhibit non-normal distribution change trends, i.e., the viscosity first decreases, and then changes from slow increasing to rapid increasing, forming a shoulder peak, reaches to the…

    • 1015 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    Polyethylene Essay

    • 1078 Words
    • 5 Pages

    polymer, it is also an addition polymer of terta fluoro ethylene CF2 =CF2 . it also an thermoplastic. Monomer tetra fluoro ethylene is obtained by treating chloroform with HF to get di-fluoro chloro methane, which on pyrolysis gives the monomer Emulsion polymerization of tetra fluoro ethylene in the presence of any peroxide initiator gives TEFLON • PROPERTIES  Teflon is linear polymer with a high degree of crstallinity  Its flow temperature is high  It is practically insoluble in all…

    • 1078 Words
    • 5 Pages
    Improved Essays
  • Superior Essays

    sugar, and vanilla into a small bag, which is then placed inside a bigger bag full of salt and ice and shaken vigorously for a short period of time. Ice cream works by combining several scientific properties including freezing point depression, emulsions, and the bonding of fats.…

    • 1528 Words
    • 7 Pages
    Superior Essays
  • Improved Essays

    Mascara Research Paper

    • 385 Words
    • 2 Pages

    There is the Anhydrous method, which means no water is included, and the Emulsion method. In the Anhydrous method all ingredients are mixed, heated, and then vigorously mixed again to draw in air (CurioCity, 2007). In the Emulsion method, water and thickeners are mixed together to make a lotion which is a strong base, while the waxes and other additives are heated separately and soon combined with pigments…

    • 385 Words
    • 2 Pages
    Improved Essays
  • Improved Essays

    Menzerna Case Study

    • 1017 Words
    • 5 Pages

    polishing pastes defined under Super Heavy Cut, Heavy Cut, Medium Cut, Finish and Super Finish help all customers with precise scraping methods and coating through effective polishes. Emulsions: Liquidifying polishing compounds Menzerna Emulsions assist you with surface quality within short cycle times. These liquid emulsions help in overcoming abrasiveness, gloss values, consumption, tool wears and degreasing properties. For Aluminium Each material is unique. Therefore, preserving its…

    • 1017 Words
    • 5 Pages
    Improved Essays
  • Superior Essays

    medicinal agent is added to the ointment base either as a solution or as a micronized powder. Confirmation of physical instability is exhibited by: • a noticeable change in consistency, for example, inordinate "bleeding" • change in color; • emulsion breakdown; • development of crystals; • contracting because of loss of water; or • The growth of micro-organism.…

    • 1085 Words
    • 5 Pages
    Superior Essays
  • Improved Essays

    454 Sequencing

    • 585 Words
    • 3 Pages

    realised from incorporation of nucleotide to new DNA strand during sequencing run. Four main steps summarises the entire sequencing technology, that have described in 454 sequencing website, (i) DNA library preparation, (ii) Emulsion PCR, (iii) Sequencing-by-synthesis…

    • 585 Words
    • 3 Pages
    Improved Essays
  • Page 1 2 3 4 5 6 7 8 9 16