Data transmission

4.1.4 Development of Feed Forward Control model in Simulink To implement feed forward control. Firstly, the transfer function of the linear DC Motor model has to be obtained. Actually in our case, the input of the plant is current so the transfer function of the mathematical model in ratio of angular velocity to current has to be obtained. It is given by: G(s)=Ω_1/I_a =R_A/K_M 1/(T_e s+1) where T_e=(J_meq R_A)/(K_m Cϕ) is electro-mechanical time constant. The feed forward control could be…

Disturbance or destruction of marine life (including changes in the distribution and types of marine life near the shore) • Degradation of scenic ocean front views from wave energy devices located near or on the shore, and from onshore overhead electric transmission lines 4) Why Oscillating Water Column? There are a number of factors concerned with the installation of the type of ocean wave energy converter. However, the OWC is chosen as one of the optimum measures to tackle the issue of wave…

Do you like the vibe of grass under your feet, or the sand in the middle of your toes, well appreciate all the more unshod contact with the Earth, since that is the thing that Earthing or Grounding truly is! As a child we cherished strolling unshod all over the place... yes it was on account of it felt great on our feet, additionally in light of the fact that our bodies felt the advantages as well. In the event that we could backtrack to those days we would be in an ideal situation, the Earth…

Harmonics: Harmonic distortions are injected at the generation as well as the consumer end. At the consumer end, harmonics are caused by nonlinear loads such as PCs, CFLs, electronic devices, etc. The harmonics distortion caused by non-linear load such as electric arc furnaces, large concentrations of arc discharge lamps, variable speed motors, saturation of magnetization of transformer and a distorted line current. The current generated by such loads will interact with power system impedance…

SIMULATION RESULTS AND DISCUSSION 4.5.1 Compensation of Voltage Sags All the proposed controllers performed to the IEEE standard. Table 4.5 shows voltage sag compensation of the proposed intelligent controllers. Compensated SS value shows the voltage sag compensation capability of the each proposed controller under different fault types and load conditions. In case 1, performance of DVR with proposed fuzzy logic controller has the sag score 0.5056pu observed at sensitive load before…

1) To perform a cellophane tape test for lice you can use cellophane or regular tape. First, (after putting gloves on) you place the tape on the skin and hair so that the sticky part of the tape can collect any visible or non-visible parasites. Try to pick up visible, abnormal particles present from the skin or hair. Collecting the whole hair shaft is useful to see if the lice have infested themselves deeper in into the skin. Once you have obtained the hair sample, place it on a slide with…

ACKNOWLEDGEMENT It is my pleasure to thank all those who helped me and made my project work a success. I would like to thank my parents who made this research possible and for extending their moral support and patience. I like to thank the Principal of our Institution, Prof. Parvardhavardhani Gopalakrishnan as well as the Project coordinator, Prof. Y.G. Tharakan, for all the patience and guidance provided to me throughout the dissertation period. I take this opportunity in expressing the…

Analyse the values of voltages in generation, transmission and distribution? Task 4 (D1) Electricity has greatly evolved from what it once was, to be fit for our modern day consumption and usage. Electrical engineering was first pioneered in the early 19th century, and great progress had been made by the time the 19th century came to a close. Most of the advancements were made by the likes of Thomas Edison, Nikola Tesla and George Westinghouse; who all aided in making electricity what it is…

Unlike any other communication technology, Power Line Communications (PLC) is a technology whereby a sender modulates the data to be sent, injects it onto medium, and the receiver demodulates the data to read it. The basic difference is that in PLC no extra wiring is needed. Considering the ubiquity of power lines, it implies that with PLC, virtually all line-powered devices can be controlled or monitored. Generally, PLC uses the same electric cables for the purpose of power delivery and…

1) Please provide the candidate’s job title and a brief overview of the candidate’s main responsibilities. Chunheng worked with me as a graduate research assistant at Mississippi State University from 2012 – 2014, conducting research on power system operations and optimizations projects. When he joined our research group in the beginning of his Ph.D. study in 2012, I, as a senior Ph.D student, supervised him in the topic of “systems of system SCUC” for a year and worked with him as co-author to…