Composite materials

Polyethylene terephthalate, most commonly known as plastic, is a material consisting of a wide range of synthetic and/or semi-synthetic organics that are malleable/ductile and can be molded into many solid objects. Plastics are typically made of organic polymers (chains of carbon or chains of carbon that have been bonded to other elements such as oxygen, nitrogen or sulfur) having high molecular masses, but often contain other substances. Usually being synthetic, and most commonly made from…

where he became certified with the Texas Commission on Fire Protection. He said that at 20 years old he liked the work schedule of a firefighter. From there, his career grew. Hallmark is now an instructor, fire investigator, firefighter, hazardous materials technician and EMT for the San Antonio Fire Department in San Antonio, Texas. Loving his job and making his family happy simultaneously can sometimes be difficult. “I know it’s hard on my family with me being gone a lot and in dangerous…

Electronic materials is very useful in today 's world, they can be used almost in all field. There are a lot of electronic materials produced every day, like semiconductor, Piezoelectric and ferroelectric materials, magnetic material etc. This lab is more concentrate on the electronic resistivity with the changing of annealing time. And XRD can help people figure out the grain size of the sample, and find the rule of the electronic resistivity with the changing of annealing time. Introduction…

in contact, and the normal force helps calculate kinetic friction. Static friction is the force which must be overcoming to originally start moving an object. Once the frictions are calculated, coefficients may be calculated as well. Equipment & Materials: -Spring Scale -Several Wooden Blocks (Around 3” x 12” x 3/4”) -Yarn or String -Push Pins or Thumb Tacks -Table or Desk Surface Procedure: For the first part of the procedure, a loop of yarn was attached to the end of a 12” block by using a…

Written Exercise Paragraph 1 1. Lattice symmetry of quartz, α-FePO4 and β-FePO4: Quartz has a trigonal lattice structure with space group P3121 (group no. 152). At any temperature below 980K, Iron phosphate exists as α-FePO4, which has a trigonal lattice structure with space group P3121 (group no. 152) where iron, phosphate and oxygen occupy Wyckoff position 3a, 3b and 6c respectively. As the temperature rises up to and above 980K, α-FePO4 exhibits α-β transition and becomes β-FePO4 that shows…

Abstract Thermo-mechanic treatment consists in utilization of two classic technological proceedings. This type of treatment was applied to the studied high-speed steel (HS2-9-1-8). The made tests wanted to establish the influence on the hardness and wear of the high-temperature thermo-mechanical treatment (HTTMT) applied to studied steel. The application of an additional plastic deformation (the deformation degree between 45 – 75%) influences positive the hardness and wear value. Being a HTTMT,…

Abstract: The study investigated the workability, and compressive strength properties of the concrete produced by replac-ing 5%, 10% and 15% by weight of ordinary Portland cement with Sawdust Ash (SDA). Slump test was carried out on the fresh concrete and compressive strength test on hardened concrete. The concrete cubes were tested at the ages of 3, 7, 14 & 28 days. The results showed that Sawdust Ash is good with use in cement. The slump decreased as the Sawdust Ash content increased…

In our previous report, 21 we investigated the influence of formulation variables of clotrimazole-loaded cubic liquid crystalline nanoparticles. The composition of chitosan tailored cubic nanoparticles was optimized employing central composite design. The findings of Small angle X-ray scattering analysis confirmed the presence of D and P cubic phases in nanoparticles. Most importantly, considerable improvement in mucin binding was observed upon incorporation of chitosan owing to electrostatic…

Observation & Calculations for Nanorefrigerant Graph of C.O.P. vs. Nanoparticle Concentration for Nanorefrigerant. C.O.P RESULTS WHEN NANOPARTICLE MIXED IN R134A & POE OIL Figure 5.1. Graph of nanorefrigerant C.O.P vs. nanolubricant C.O.P. 5.2. GRAPH OF PERCENTAGE CHANGE IN THE COP OF THE SYSTEM Figure5.2. Graph of percentage C.O.P of nanorefrigerantvs. nanolubricant. Here the result shows the percentage change in the C.O.P when the air conditioning test rig run on the nanorefrigerant and…

3.3.3 Selection of Die Angles The split die was designed for the ease of assembly for fabrication. AISI 52100 steel was selected as the material for the die fabrication. The entry part of the die is 12 mm and has 120 mm length. The profile of the die is also shown in the solid works software. The angle of the die is 90 is maintained, the slope radius is 20 mm. the Figure.3.1 & Figure. 3.2. illustrate the split die design and solid works model of the split die. Figure. 3.1 : Split die…