Chemical vapor deposition

Water is a transparent, odourless, tasteless liquid, a compound of hydrogen and oxygen freezing at 30°F or 0°C and boiling at 212°F or 100°C, that in a more or less impure state constitutes rain, oceans, lakes, rivers etc; it contain 11188% of hydrogen and 88.812% of oxygen by weight. (Dictionary.com) The Earth is surrounded by 70% of water, however, that 70% is composed of salt water and fresh water. The salt water is made up of 97% and fresh water is 3%. 2% of the fresh water is frozen up in…

Phase Solubility results The phase-solubility diagram (figure 1) obtained was classified as AL type(20) because the apparent solubility of ISH increased linearly with β-CD concentration over the entire concentration range studies, thereby suggesting the formation of a water soluble complex. A slope value of less than one indicated that an inclusion complex in a molar stoichiometric ratio of 1:1 was formed between the drug and β-CD in solution. The stability constant (718.58 M–1), computed from…

NiCd is the chemical abbreviation for the composition of Nickel-Cadmium batteries, which are a type of secondary (rechargeable) batteries. Nickel-Cadmium batteries contain the chemicals Nickel (Ni) and Cadmium (Cd), in various forms and compositions. The nickel-cadmium battery, invented by Waldmar Jungner in 1899, offered several advantages over the then only rechargeable battery, lead acid, but the materials were expensive and the early use was restricted. Developments lagged until 1932 when…

Most corrosion is an electrochemical reaction. Anything that affects the speed of the chemical reaction will in turn affect the amount of current flow, which will affect the rate of corrosion. The rate of corrosion is directly proportional to the amount of current in the electrochemical corrosion cell. If the current can be measured accurately, then an exact calculation of the metal loss can be made. 2.2.1 ELECTRICAL EFFECTS ON THE RATE OF CORROSION Any issue that have an effect on the…

1.1. Research questions generation In the TMCs manufacturing, fabrication energy and reinforcement content are two significant input variables [1,9,11], which are related to laser power and B content in laser deposition. Based on the preliminary results (Figure 6 in §4.5), laser deposition with low level of laser power could fabricate the 3D TMC parts, however, the 3DQCN microstructure was not found inside the parts. Low laser power led to poor fluidity of molten material, which would restrict…

Boris Kozarski Lab partner: Donovan Ortiz 9/23/16 Bio 118: A-65 GTA: Mian Li, UGTA: Shelby Schaffer Intro: Enzymes are important biological molecules that help catalyze numerous reactions in the body. They are an arrangement of proteins designed to serve very specific roles. Enzymes contain active sites that substrates bind to. The enzymes then help orient those substrates so they achieve ideal reaction conditions. As a result, substrates are broken down much faster than they would on their own…

Part one Make a 3 list of chemical safety hazards? The three chemical safety hazards are: Poison Toxic Corrosive Reactive Environmental hazards 2. What is Amalgam? Amalgam is mixture of metals of mercury with another metal and other metal. Almost all metal can be an amalgam with a form of mercury. 3. If you had to train someone on how to separate the mercury from the amalgam, what training would they need? WHY? If I had to train someone on how to separate the mercury…

What is a chemist? A chemist is a scientist that studies, physical and chemical properties of different forms of matter. There are two profound chemist whose findings were crucial to today's understanding of chemistry. There names were Marie Curie and Dimitri Mendeleev, both chemist made significant impacts on modern day science and society. Dmitri Mendeleev is responsible for the creation of the periodic table, while Marie Curie is responsible for discovering radioactivity, which advanced the…

The Rate of Chemical Reaction and the Factors Affecting Reaction Rates The purpose of these labs is to investigate and determine how three factors- concentration, temperature, and a catalyst- affect the rate of a chemical reaction. In the first lab, “Rate of Chemical Reaction,” 1 x 8-well micro strips were used to combine a potassium iodate solution and a sodium meta-bisulfite solution under different conditions; each trial was timed from the point of the first visible reaction until the last…

George S. McGovern once said “I'm fed up to the ears with old men dreaming up wars for young men to die in.” McGovern is stating that the “old men”, the government use the young men of a specific country to fight the wars they initiate. War is most of the time seen as a sense of pride and tribute for one’s country, but many don’t realize the savagery battlefields hold. Just like George McGovern, the poet, Wilfred Owen, who was a soldier in World War One and died in that Great War wrote many…