Carbon fiber

Hypothesis It is hypothesised that cotton is the better fabric material for the winter baby jumpsuit. Introduction Fibres are the basis for all textiles and there are two major sources of textile fibres: natural and synthetic. Natural fabrics are derived from fibre that either comes from animals, vegetables or minerals. Synthetic fabrics are synthesised chemically emulating natural fibres based on their uses. Examples of natural fabric include wool from sheep, silk from silk worms, cotton…

thus increasing the effect of the material properties [18]. According to Yang et al, nanocomposites have been shown to afford remarkable property enhancements compared to the conventional composite. Polymer nanocomposites with layered silicates and carbon nanotubes have attracted great interest for the improvement of structural properties and development of new materials with different functional properties [19]. Based on Potts et al, the property…

Carbon-Carbon Composite Properties Carbon fibers are exceptionally stronger than carbon bulk material. These fibers have very small diameters, typically ranging from 4 to 10 micrometers, which in turn yield a relatively small fiber surface area. Flaws such as dislocations, cracks, and impurities, are virtually inexistent in a specimen of such size, and so the structure is virtually defect free. Because the fibers are kept separated from one another by the…

MANUFACTURING COSTS: Functional Elements: The baby stroller is mainly composed of three materials: Nylon (woven, as fabric) Plastic (injection molded, for plastic parts) Steel (tubing, for frame) Fasteners are included in the assembly of different components of the strollers. The stroller would have to be manufactured on an assembly line. The fabric weaving and seat making, the plastic molding and the frame can simultaneously be manufactured in their respective work areas. Following are…

Optical fiber thin as hair is everywhere on this planet, carries an enormous amount of information from place to place. There are a number of desirable characteristics of the optical fiber for conveying this information. They have the ability to carry large amounts of information, a low cost and have the immunity from electrical wiring and wireless communication link a number of disturbances that can afflict. Advantages of optical fibers for transmitting information from place to place, it…

rays(laser beams) into electronic signals, into a form ie readable. Fiber optic sensors have numerous advantages over other conventional electronic sensors. Some important advantages are as below • Ability to integrate different structure. • Their inability to conduct electric current. • Highly resistive to electromagnetic interference. • Lightweight with high sensitivity. • Multiplexing capability. 1.1 Optical fiber: Basics An optical fiber is composed of three parts…

communication systems must be based upon a wired foundation. This wired system is where fiber optics come in. Fiber…

What is Fiber Optic Cables? Back in the day we used copper wires for our tele-communication and to interconnect throughout the world. However as technology and machines start to grow more powerful, we are forced to put a change in this production of copper wires. The wire density becomes a very critical factor in the modern era, however the limit in size must always result in better performance. Fiber optics proves to be highly effective in its high bandwidth, as it allows on a single fiber to…

impurities in it because this will cause dispersion and attenuation for the light traveling down the wire which would decrease the signal strength. The light travels down the core through the process of total http://cablesondemandblog.com/wordpress1/fiber-optic-cables-on-demand/ internal reflection however this can only occur if the optical fibre has a cladding. The cladding of an optical fibre can be made out of any material that has a lower refractive index than the core but is usually made…

cable, Wi-Fi and fiber optic as our media. Ethernet Technology The Ethernet technology was mostly used in the LAN because; 1. We used Ethernet speed of 10mbps for areas in the LAN that required higher bandwidth 2. Our campus network model supports dual links between each distribution layer routers and case switches. We are there able to load balance the aggregate traffic from multiple access switches across the links. 3. Giganet Ethernet will be used between switches but Fiber will be used…