Base pair

As you can see, the data recovered from this experiment is very unusual. This is the interpretation and analysis the experiment regarding the cleaning power of the chlorine bleach produced by Clorox and laundry detergent produced by Oxiclean. This interpretation is essential to understand the data and how effective each of the independent variables in this experiment are. As an analysis, there were many key points that made this data relevant. Regarding the coffee, both of the cleaners did quite…

A graduated cylinder was used to measure 200mL of distilled water into an Erlenmeyer flask and then 40mL of 0.6 M NaOH was added to the distilled water in the flask. The flask was then plugged with a rubber stopper and shook in order to mix the solution. A buret was then washed, rinsed with distilled water, and then 5 mL of the NaOH diluted solution. After the cleansing of the buret, it was then filled up with the NaOH diluted solution. The dilution of the solution was calculated to find the…

With the acid, HCl, the pH of the tap water went from 7 to 1.5 after 30 drops, indicating that the concentration of hydrogen ions increased significantly. With the base, NaOH, the pH of the tap water changed from 7 to 12 after 30 drops, indicating that the concentration of of hydrogen ions decreased significantly. These changes occurred in the tap water because there are no chemical buffers present in water. In the potato homogenate, when 30 drops of HCl were added the pH changed from 6 to 3.5…

Acidic rain plays a key role in how rapidly things erode and die in our environment whether people notice it or not. Many are uneducated on this topic which makes it more dangerous to us and our surroundings. Not only can this toxic water effect trees and animals, but also buildings, statues, and even cars (webprojects.edu, 1). Acid rain is something humans should be concerned about in the twenty-first century due to our advancements in technology. The majority of the United States suffer from…

Throughout this acid, base and buffer lab, this will allow each individual to gain an enhanced sense of knowledge of how these different aqueous solutions work as a buffer system or how they are unable to perform as buffer system mixed with two solutions together. This can be identified through the colour change to measure pH behaviour in several aqueous solutions, therefore the different factors that will cause the change of pH. This will gain understanding of how this relates to the biological…

Josie Nadaud CHM 144L-A Professor Jessa/TA Jess October 8, 2015 Experiment 5 Partial Formal Report Methods 1. Traditional titration with indicator dye (week one) First the 50mL buret was cleaned by filling it with distilled water and letting it empty three separate times. It was further cleaned by coating the inside with 5 to 10 mL of the 0.0468M NaOH titrant solution and emptying that into the waste beaker as well for three repetitions. 40.0 mL of 7-Up soda was diluted with 60.0 mL of…

This chemical reaction involves neutralization, where an acid and base react to produce a neutral solution of salt and water. As this information is provided, the known concentration of NaOH(aq) is 0.25M. It is necessary to rinse out the burette with sodium hydroxide solution before starting titration, as the concentration of the base can be affected by the water used to clean the burette. At the same time, when cleaning the burette it may not have been washed thoroughly . By rinsing with…

A different type of Japanese bamboo had been studied by Phong et al. (2012). Moso bamboo was harvested and processed using several methods to obtain the fiber. In alkali extraction method, the bamboo was cut into thin slabs with length and thickness of 25 cm and 3 mm, respectively. The slabs were immersed in different concentration NaOH solution (1%, 2%, 3%) at 70 ⁰C for 10 h. This study showed that only 1% NaOH resulted in higher mechanical properties. The roller looser was then used to produce…

determining an unknown acid or base, anion and cation test were performed. These tests allowed for the components of the solutions to be identified, therefore, achieve the second goal. The pH was also used in to help find the identity of the unknown solutions and it was used to draw conclusions about the solutions. Dilutions were used to help understand the different behaviors of different concentrations. Household items were used to help apply basic theories about acids and bases such as pH.…

Lab Report Concerning Acid-Base Titrations The purpose of this experiment was to recognize the procedures for conducting acid-base titrations. Each acid-base titration used one solution to analyze another; it also involved the use of an indicator, which denoted the endpoint of the titration. The indicator used was phenolphthalein; it produced a pink hue when the titrations reached their endpoints – between pH 8 and pH 10. The endpoint was reached when the moles of the base being used became…