Amperometric titration

The objective of the lab was to determine the densities of known and unknown metal solids and liquids. For the liquids, initially, an Electronic Scale was placed onto Work Bench, and it was zeroed. An empty 50 mL Graduated Cylinder was placed onto the scale, weighing 54.00 grams. In increments of 10 mL. Until the volume was 30.00 Ml, 10.00 mL of water was poured into the Graduated Cylinder. In between each increase of 10.00 mL, the total volume and mass were recorded. For the known metals, the…

Danika Ng CHEM 1252 L Exp 12: Thermodynamic Analysis of Chemical Equilibria INTRODUCTION The reaction being done with borax and HCl is an acid base reaction. The K constant expression of the reaction is Kc = [Na^+][B4O7^-2]. A titration is needed for this experiment because when a strong acid with a known concentration is added to a weak base, the unknown concentration of the weak base can be found, which can then find the moles of the weak base, which can then find the Kc. The first law of…

The reaction of soda ash (Na2CO3) with calcium sulfate in water is represented by the following chemical reaction: Na2CO3 + CaSO4 >>> CaCO3 + Na2SO4. Assuming that this reaction is complete and that there is 153 mg/l of CaSO4 initially present, what is the mass of soda ash that must be added to 1 liter of the water? How many grams of CaO are required to be the chemical equivalent of 246 g of Mg(HCO3)2? A complete reaction requires the number of CaSO4 to be equal to the number of moles…

NIMOTOP INJECTION Nimodipine 0.02% solution contains the following excipients: Ethanol 96%, Macrogol 400, sodium citrate, citric acid, Water for Injections Ph. Eur. These excipients consist of properties that aim towards the proper functionality of Nimotop. They consist of inherent stabilities that cause little or no effect in the stability of the drug and they do not have any acute or chronic toxicity. The excipients are also added into the Nimodipine 0.02% solution to enhance the biological…

temprature which was found using the data logger. • The enthalpy change can then be calculated after all these values are found. Each trial can then be avaraged to find a more accurate result for our experiment. Conclusion and evaluation: The titration should be carried out carefully while making sure the color of the neutralized solution is the same for all the trials. This can be done by keeping the first sample aside that can be used for reference of the other trials can do this. The…

CHAPTER THREE MATERIAL AND METHODS 1. PHYSICO-CHEMICAL CHARACTERCITICS: The effluent collected were analyzed in the laboratory for pH, acidity, alkalinity, salinity, total dissolved solid(TDS), conductivity, total hardness, calcium hardness, magnesium hardness, total solid, total suspension solid, turbidity, BOD, DO and COD using standard methods (APHA,2005). A.DETERMINATION OF pH: The electrode of pH meter was calibrated with standard buffer solutions of pH 4, 7 and 9. The electrode was then…

DISCUSSION There are three chemical properties will be discussed which are combustion, reaction with bromine and reaction with potassium permanganate. Combustion was used to test the unsaturation of hydrocarbon. The degree of unsaturation refers to the number of the rings and / or multiple bonds present in the hydrocarbon molecule (McMurry, 2015). Hexane was a saturated hydrocarbon, it completely combusted and emitted carbon dioxide plus water. Cyclohexene was an unsaturated hydrocarbon, it…

Getting sprayed by a skunk is no fun at all. It is the worst smell and the odor sticks to everything, It's probably no surprise that the same chemical compound called thiols that's found in skunks' stinky spray is also present in rotting flesh and feces. It just plain out stinks! How to remove skunk smell? In a plastic bucket (not metal), mix the following ingredients thoroughly: 1 quart of 3% Hydrogen Peroxide 1/4 cup of baking soda 1 tablespoon of liquid dish washing soap (Ivory is…

The purpose of today’s lab was to determine how effective antacids are at neutralizing HCl. This experiment required us to place 3 antacids tablets into 3 Erlenmeyer flasks. Next we were required to add 50.00 mL of 0.500M HCl and five drops of phenolphthalein. Finally, we needed to titrate NaOH into the flasks. Each antacid brand required a different amount of NaOH in order for it to be completely titrated. The data collected from the experiment allowed each group to calculate the cost…

The researchers compared both biologically produced manganese oxides and chemically produced manganese oxides for the oxidation of diclofenac. Because biologically produced manganese oxides are known to have high specific surface areas and high catalytic reactivity, this substance offers higher rates of oxidation for diclofenac when compared to chemically produced manganese oxides.² If biologically produced manganese oxides prove to completely eliminate diclofenac from the water supply, the…