Air Force One

Stress: Stress is defined as ‘’the force across a boundary per unit area, for all orientations of that boundary.’’ It is derived from force, a physical quantity and area, a geometrical quantity. Therefore, stress is also characterized as a fundamental quantity, like velocity, energy, etc. that can be brought under quantification and can be analyzed without any obvious attention of the physical grounds of the material or of its nature. Example: When a solid bar is supporting a load, each…

its potential energy? When the pendulum of a clock swings back and forth, the pendulum reaches its maximum potential energy at the top of the swing, and it reaches its maximum kinetic energy at the bottom of the swing. In the absence of frictional forces, the pendulum’s kinetic energy will be equal to its potential energy at the bottom of the swing. 2. What is the difference between energy conservation and the principle of the conservation of energy? Give some examples of each. The difference…

The knuckle joint assembly consists of following major components: 1. Single eye. 2. Double eye or fork. 3. Knuckle pin. 4. Collar. And 5. Tapper pin. At one end of the rod the single eye is formed and double eye is formed at the other end of the rod. Both, single and double eye are connected by a pin inserted through eye. The pin has a head at one end and at other end there is a taper pin or split pin. For gripping purpose the ends of the rod are of octagonal forms. Now, when the two eyes are…

The magnitude of F_(ML,XYZ) is one of the primary influencing parameters on the vessel static stability. Latter, the sequence of influencing parameters are β and α. If the F_(ML,XYZ) increases, the vessel’s initial list changes rapidly for the same set of β and α as a result the range…

get even with the rest of the Female Jedi Master now Ahsoka walked in to her room then open up a secret door in her room that help the biggest strap-on dildo no one has every seen yet. It was like 20 inches long and at least as wide as say two and a half Light sabers. The fact that she was even thing about trying it out on any one of them was unthinkable to say the least now. But Ahsoka thought it was time now to teach them all a lesson that they never for get. Her play was to call…

Lab 6: Energy The intent of this lab is to show the relationships of energy to a system. For this experiment, we had a spring attached to a car, which was attached to a string that went through a rotary sensor and had a weight attached at the end. By stretching the spring, and causing the weight to drop nearer to the ground and bounce up we were able to determine: the angle of the string and rotations; the car position; height of the weight bouncing up and down; velocity; the stretch of the…

A skid steer loader is a versatile machine, and a must have for anyone in landscaping, large-scale construction, farming, or logging. It has a rigid frame and lift arms you can attach various tools and skid steer loader attachments to. Loaders may be track-equipped or four-wheel drive. The drive system of the loader has no transmission. Instead, it uses pumps and hydraulic motors to power the wheels or tracks. Wheels can drive independently of each other, which makes them very maneuverable.…

Difference between a racing dirt bike and a Trail dirt bikes Did you know that Racing dirt bikes is way different than riding regular dirt bikes? Most people think that they are the same, but they are not very similar. Racing is different from regular riding because of the bikes engin, their suspension, and their tires. Motocross bikes focus on different speeds. Trail bikes are meant for going threw mud and meant for more power. gearing up helps if your trails consist more of long…

To do this experiment you will need two subjects that have different arm lengths. In this experiment Subject 1 had an arm length of .81 meters and Subject 2 had an arm length of .77 meters. It is crucial that the subjects have different arm lengths because if they don’t your results will be invalid. The first step in this experiment is to set up the camera using the tripod and insert an SD card. Next, position the camera perpendicular to the sagittal plane along the x-axis in regards to the…

Conclusion At first, my hypothesis was that P-waves would move faster than S-waves. I thought this because P-waves went straight and S-waves where lobbed to the side. My hypothesis was correct, since P-waves had a more focused channel of energy unlike S-waves, which bended to the side. This causes S-waves to go slower and P-waves to go faster. When the experiment was done, P-waves averaged at .64 seconds and S-waves averaged at .68 seconds. On the P-wave experiment, I pulled the spring back…