Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
23 Cards in this Set
- Front
- Back
|
Header Board or Bulkhead |
- PMS - Not CBB - No holes or missing Rivets |
|
|
Landing Gear |
- PMS - Not CBB - Is in the fully raised position - The crank handle is secure |
|
|
Frame and Cross Members |
- PMS - Not CBB - Not missing any Cross Members |
|
|
Frame and Tandem Release |
- PMS - Not CBB - Release handle and locking pins are in the fully locked position |
|
|
Spring Hanger or Spring Mounts |
- PMS at both ends - Not CBB - Make sure that you check and point out both front and rear Spring Mounts |
|
|
Spring Arm |
- PMS - Not CBB |
|
|
U-Bolts |
- No U-Bolts - It is important to know what kind of Suspension is on the Trailer your inspecting |
|
|
Shock Absorbers |
- PMS - Not CBB - Not leaking fluid |
|
|
Air Bag |
- PMS at both ends - Not CBB - No ABC - Not leaking air - No missing mounts or bolts |
|
|
Brake Hose or Brake Line |
- PMS at both ends - No ABC - Not leaking air |
|
|
Brake Chamber |
- PMS - Not CBB - Not leaking air |
|
|
Slack Adjuster and Push Rod |
- PMS - Not CBB - With the brakes released and pulled by hand, the push rod should not move more than 1 inch |
|
|
Brake Drum |
- PMS - Not CBB |
|
|
Brake Lining |
- PMS - Not CBB - No oil or debris - They are not worn dangerously thin to 1/4 |
|
|
Axle Seal or Hub Seal |
- PMS - Not CBB - Not leaking grease - Filled to Manufactures Specifications |
|
|
Lug Nuts |
- PMS - Not CBB - None are missing (10 total) - No rust trails or powder residue (indicating a loose or over tightened Lug Nut) - No cracks around the bolt holes |
|
|
Rim |
- PMS - Not CBB - No unauthorized welds |
|
|
Spacing |
*This only applies if your trailer has duel tires* - Check to see that there is proper space between the tires - There is nothing stuck between the tires *If your trailer has wide based tires this doesn't apply* |
|
|
Tires |
- No ABC to the tread or sidewalls - Tread depth is no less than 2/32 of an inch - Properly filled to Manufactures Specifications between 100 to 110 psi *Check with an air gauge* - Not leaking air |
|
|
Valve Stem |
- Not CBB - Not leaking air |
|
|
Mud Flaps |
- PMS - Not CBB |
|
|
Rear Doors and Hinges |
- PMS - Not CBB - Doors open, close, and latch properly - Door seals are not worn or dry rotted |
|
|
Name All 22 Components of the Trailer |
- Header Board or Bulkhead - Landing Gear - Frame and Cross Members - Frame and Tandem Release - Spring Hanger or Spring Mount - Spring Arm - U-Bolts - Shock Absorber - Air Bag - Brake Hose or Brake Line - Brake Chamber - Slack Adjuster and Push Rod - Brake Drum - Brake Lining - Axle Seal or Hub Seal - Lug Nuts - Rim - Spacing - Tires - Valve Stem - Mud Flaps - Rear Doors and Hinges |
