Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
17 Cards in this Set
- Front
- Back
|
|
|
|
|
|
|
|
|
"F-81 drop splice barrel connectors shall meet what minimum requirements
|
ANSI/SCTE 01 2006, specification for ""F"" Port, Female, Outdoor
|
|
"F-81 indoor drop splice connectors shall meet what minimum requirements?
|
ANSI/SCTE 02 2006, specification for ""F"" Port, Female, Indoor
|
|
"F-81 indoor drop splice connectors must have what?
|
At least one end with its threads all the way to the base of the port to accommodate panel nuts and mounting to wall plates
|
|
"Cable fasteners must not
|
Crush, deform, or damage the cable
|
|
"What fastener are preferred over fasteners held in place with nails or staples?
|
Screw type
|
|
"What must not be used to secure coaxial drop cables
|
"Metal staples
|
|
"Plastic fasteners must be
|
UV and ozone stable
|
|
"Clip guns that use a half-round plastic insert to _______ ________ the cable are acceptable for use.
|
prevent crushing
|
|
"Metallic fasteners and metallic components must not
|
Rust or otherwise discolor the wood/siding when exposed to the environment
|
|
"All passive devices (splitters) must meet what minimum mechanical and electrical specifications?
|
aNSI/SCTE 153 2008, Drop passives: Splitters, Couplers, and Power Inserters
|
|
"Locking or security terminators must have what?
|
75-ohm resistor to terminate the signal
|
|
"All locking terminators must be sealed to prevent what?
|
Moisture contamination of any disconnected drop while threaded on the Locking Terminator
|
|
"Drop cable perpetration tools shall not be capable of what?
|
Field adjustments of the cutting blades
|
|
"Cutting blades in all drop cable preparation tools shall be replaced
|
Monthly at the minimum
|