Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
Eye wire Forming pliers |
Shape the eye wire to curve the lens |
|
Eye wire closure pliers |
Close the eye wire without having to put the screw in. |
|
Truing the frame |
Place frame into standard frame alignment |
|
Frame warmer |
Warm air or salt used to warm frame making it easy to adjust. |
|
P.D. Stick |
Basic mm ruler for measuring |
|
X-ing |
Frame front is twisted, looks like an X when viewed from the side. |
|
Half padded pliers |
Used to hold the frame without damaging the front. |
|
Zyl file |
Used to file plastic frame |
|
Pillar file |
Used to file metal frame |
|
Riffler file |
Spoon shaped used to file hard to reach areas. |
|
Slotting file |
Used for moving screws |
|
Rat tail file |
Slim pointed file used to smooth the drill lens hole. |
|
Finger piece pliers |
Used for adjusting the temple folding the angle |
|
Double padded pliers |
Both sides padded to prevent marks on frame while adjusting. |
|
Self-closing tweezers |
Used to hold screws without using hands. |
|
Standard screwdriver |
Small optic screwdriver with single flat edge tip. |
|
Phillips screwdriver |
Small optic screwdriver with star or x shape tip |
|
Nose pad pliers |
Marking so the nose pad screw housing is held while adjusting |
|
Needle nose pliers |
Long tip pliers used to adjust nose pads and other parts. |
|
Temple bend pliers |
Used to help bend the temple. |