• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/54

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

54 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)

Wiper blade

No cuts or dry rot; lies flush to windshield

No ____ or ____ ____; ____ ____ to windshield

Wiper arm

Straight and secure; no cracks

____ and ____; no ____

Wiper motor

Secure and undamaged

____ and ____

Transmission fluid dipstick

Checked when engine is warm

Checked when ____ is ____

To check oil...

1. Pull dipstick out


2. Wipe clean


3. Reinsert


4. Pull back our and check that oil is above fill line



Checked when engine is cold and on level ground

4 steps



Checked when ____ is ____ and on ____ ____

Compressor and brass fitting

Secure and undamaged; this bus equipped with gear driven compressor

____ and ____; this ____ equipped with ____ ____ compressor

Throttle

Brake valve



Secure to fire wall; undamaged

____ to ____ ____; ____

Hose lines

Green, yellow and red are air



Secure and undamaged

____, ____, and ____ are air



____ and ____

Fuse box

Covered, secure, and undamaged; wires bundled without cuts or fraying

____, ____, and ____; wires ____ without ____ or ____

Fan

Spins freely; no broken or missing blades

____ freely; no ____ or ____ ____

Radiator fins

Undented

____

Serpentine belt

No more than 3/4" of play; no fraying, cracking, or splitting

No ____ than __/__" of play; no ____, ____, or ____

Primary and secondary fuel filters

Secure and undamaged; not leaking

____ and ____; not ____

All hoses

Secure; no cuts, bubbles, or dry rot

____; no ____, ____, or ____ ____

All fluid hoses, air lines, and electrical wires

1. Securely bundled and clamped


2. Not frayed, chafed, or cracked


3. Not spliced or taped


4. No leaks


5. No sound of air leaking


6. No drips or fluids puddling on engine


7. Insulation cover present where needed

7 parts

Main frame

Part of suspension system



Secure; no cracks, welds, or excessive rust

____; no ____, ____, or excessive ____

Hanger

Part of suspension system



Securely bolted to frame

Securely ____ to ____

Leaf springs

Part of suspension system



Not cracked, broken, or missing; no signs of walking; secured together and to axle by u-bolts and u-bolt nuts

Not ____, ____, or ____; no signs of ____; secured ____ and to ____ by _-_____ and _-____ nuts

U-bolts and u-bolt nuts

Secure; not loose

____; not ____

Shackles

Part of suspension system



Secure to main frame; undamaged

____ to ____ _____; _____

Shock absorber

Part of suspension system



Secure; no excessive rust; not leaking

____; no excessive ____; not ____

Steering shaft

Part of steering system



Comes through fire wall from steering column; straight; no more than 2" play


Comes through fire wall from steering column; straight; no more than 2" play

Comes through ____ _____ from ____ ____; ____; no ____ than ____" play

Boots

Part of steering system



Undamaged

____

Universal joint

Part of steering system



Well greased

Well ____

Gear box

Part of steering system



Secure to frame; not leaking; has 3 hoselines connecting it to the power steering pump

____ to ____; not ____; has ____ ____ connecting it to the ____ ____ ____

Power steering pump

Part of steering system



Secure; not leaking; undamaged; hoseline connecting it to the power steering fluid reservoir

____; not ____; ____; ____ connecting it to the ____ ____ ____ ____

Power steering fluid reservoir

Part of steering system



Secure to frame; not leaking; undamaged

____ to ____; not ____; ____

Pitman arm and drag link

Straight; secured with castle nuts and cotter pins

____; ____ with _____ nuts and ____ pins

Castle nuts and cotter pins

Part of steering system



Secures pitman arm and drag link; well greased

Secures ____ ____ and _____ ____; well ____

Upper steering arm and steering ring knuckle

Part of steering system



Well greased

Well ____

Spindle

Part of steering system



Internal mechanism; holds wheel in place

____ mechanism; holds ____ in place

Tie rod

Part of steering system



Straight; secure; no welds

____; ____; no ____

Air canister

Part of air brake system



Secure

____

Air hose line and ABS wire

Part of air brake system



Bundled together and secure; no dry rot



Air enters canister and pushes against push rod

____ together and ____; no ____ ____


____ enters canister and pushes against ____ ____

Push rod

Part of air brake system



Pivots slack adjuster

Pivots ____ ____

Slack adjuster

Part of air brake system



No more than 1" play

No ____ than ____" play

Cam shaft

Part of air brake system



Turns the S-cam

Turns the _-____

S-cam

Part of air brake system



Forces brake shoes away from each other and presses them to inside of the brake drum

Forces ____ ____ away from ____ ____ and presses them to _____ of the ____ _____

When brake is released...

Return springs bring brake shoes back into position

____ ____ bring ____ ____ back into position

Dust cover

Part of wheel/tire system



Secure; no excessive rust

____; no excessive _____

Brake pads

Part of wheel/tire system



Check through 2 openings in dust cover



At least 1/4"; no pitting or grooves; no oil or grease

Check through ____ openings in ____ ____



At _____ __/__"; no _____ or ____; no ____ or ____

Brake drum

Part of wheel/tire system



Check through 2 openings in dust cover



Dry; no cracks, welds, bluing, or obstructions

Check through ____ openings in ____ ____



____; no ____, ____, _____, or _____

Rim (inside)

Part of wheel/tire system



Smooth; no cracks, welds, or excessive rust

____; no ____, ____, or excessive ____

Bead (inside)

Part of wheel/tire system



Flush to rim; no pinching

____ to ____; no ____

Tire wall (inside)

Part of wheel/tire system



Smooth; no cuts or bubbles

_____; no ____ or ____

Tire treads

Part of wheel/tire system



At least 4/32"; no fabric showing through; check in 3 spots across (not around)



Front tires cannot be retreads

At ____ __/__"; no ____ showing through; check in ____ spots _____ (not _____)



____ tires cannot be _____

Tire wall (outside)

Part of wheel/tire system



Smooth; no cuts or bubbles

____; no ____ or _____

Bead (outside)

Part of wheel/tire system



Flush to rim; no pinching

____ to ____; no ____

Rim (outside)

Smooth; no cracks, welds, or excessive rust

____; no _____, ____, or excessive ____

Lug nuts

Part of wheel/tire system



Not loose; no excessive rust or elongation

Not ____; no excessive _____ or ____

Axle bolts

Part of wheel/tire system



Not loose; no excessive rust or elongation

Not ____; no excessive _____ or _____

Hub

Part of wheel/tire system



Not leaking

Not ____

Valve stem

Part of wheel/tire system



Brass with brass cap; check pressure

____ with _____ cap; check _____

Mud flap

Part of wheel/tire system



Secure; not dragging or rubbing on tire

____; not ____ or _____ on _____