Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
What type of copper tubing joint requires the use of a ferrule? |
Compression |
|
What type of copper tubing is not identified by color on the tubing itself? |
Soft tempered |
|
The pipe fitting which makes a 180 degree turn is called? |
Return fitting |
|
The final step in the galvanizing of pipe is to dip the pipe into a bath of molten (blank) |
Zinc |
|
Which of the following is not a reason to use stud bolts instead of machine bolts for bolting flanged piping joints |
Stud bolts in the less frequently used size and materials can be readily made from round stock |
|
Where should the pressure enter a globe valve? |
Depends on the desired action of the disc or plug becomes detached from the stem (fail open or failed closed) |
|
In a piping installation allowing for expansion in two directions, how should the anchor and guide be positioned relative to each other? |
Guide, anchor, guide |
|
What are the 3 fuel gases used for heating pipe or tubing |
MAPP, acetylene, propane |
|
The purpose of the foot switch on a power operated pipe cutting and threading machine is toquen |
Act as a safety device to **** off the motor if the operators foot is removed from the switch |
|
Which of the following is not a reason for using cutting oil when threading pipe |
To protect the threads from rust |
|
Which |
Never |
|
The color code for type K copper tube is |
Green |
|
Which of the following types of copper tubes has the smallest wall thickness |
DWV |